3 Solutions to Hard Reset Meizu 21 Pro Phone Using PC

Find here 3 easy ways to hard reset Android using ADK or Android Device Manager from your PC. Also, do not forget to back up Android to PC before starting.

There are several cases when someone wants to know about how to hard reset an Android phone using PC. Such cases usually arise when your device is not accessible or stolen. It also involves situations when you forget the password or the unlock pattern of your device, or maybe your phone has frozen and is non-responsive. In such situations, it is very important to know how to reset Android phones to factory settings from the computer.

Factory reset will delete all your user data from internal storage. Thus it is also very important to back up all your internal data of the Meizu 21 Pro device before you hard reset Android via PC. Moreover, a hard reset should be your last option at hand to revive your Android device. Hence, in this article for all the users out there, we have picked up the solution on how to factory reset Android Phone using PC.

You must ensure that all the steps are followed in sync so that the hard reset Android via PC is successful.

Part 1: Back up Android before hard reset

Since factory reset involves removing all data, adjusted settings and logged accounts from the Meizu 21 Pro device; therefore, it is very important to back up all the data before moving on with the factory reset process. So, in this section, we will show you how to first back up your Android device using the Phone Backup . This is an easy-to-use and very convenient Android backup software that can be used to back up an Android device.

Wondershare Dr.Fone

Flexiblely Back up and Restore Android Data

• Back up Android data to the computer with one click.
• Preview and restore the backup to any Android device or iOS device.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restoration.

3,981,454 people have downloaded it

Let’s have a look at the easy process to back up Android before the factory reset it.

Step 1: After installation completes, connect your Android device via data cable and go to “My Backup”. Then, this tool will automatically detect your device.

Step 2: You can now see the file types that will be backed up, such as Contacts, Messages, Calendars, Videos, etc.

Click here


Step 3: Click on “Backup pow”  to proceed with the process. The backup process will start, keeping connected the Meizu 21 Pro device during the phone backup process.

Step 4: Within a few minutes, your whole device will be backed up. You can click “View Backups” to view all data that is backed up.

Phone Backup is one of the handiest and easy-to-use features within Wondershare Dr.Fone. Users can select their opted files manually to restore. This tool supports 8000+ Android devices worldwide. Users will feel safe and secure using this revolutionary software.

safe & secure

Part 2: Hard Reset Android using Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) is a user-friendly software tool that helps you unlock your Android device if you forget the passcode, pattern lock, PIN, or face/fingerprint lock. It supports various Android devices, allows you to bypass lock screens without data loss, and provides step-by-step instructions for easy unlocking. It also helps with FRP unlock and works on both Windows and Mac systems.

Step 1: Launch Dr.Fone - Screen Unlock on your computer and select “Screen Unlock” from the main interface. After that , you need to connect your Android phone to the computer using a USB cable.

Step 2: Choose “Android” > click “Unlock Android Screen” if you want to remove the lock screen. Choose your device brand. The hard reset methods vary for different device brands, so make sure that you choose the correct device brand.

Step 3: Put the Android phone into Specific mode with the help of Dr.Fone. And then, Dr.Fone will factory reset your Android phone within a few minutes. Now you can access your Android phone without a password!

safe & secure

In this process, we will learn how to hard reset Android phone to factory settings from a computer using SDK. This involves removing all data from the Meizu 21 Pro device using a PC.

Follow the given steps to know how to hard reset an Android phone using PC.

Pre-Requirements

• PC that runs on Windows (Linux/Mac installer is also available)

• You have to download Android ADB tools on your computer. Android ADB Download: https://developer.android.com/studio
• A USB Cable to connect your Meizu 21 Pro with your computer.

Steps to hard reset Android using SDK

Step 1: Enable USB Debugging in the Android settings. Open Settings>Developer options>USB Debugging. If developer options can’t be found on the Meizu 21 Pro device, then please go to Settings > General > About phone > Common > Software info (tap on it 5-8 times).

Step 2: Install Android SDK Tools. Ensure that Platform-tools and USB drivers are selected in the SDK manager window.

Step 3: Ensure that the drivers for your Android are installed on your PC or at least the Generic drivers are present

Step 4: Connect the Meizu 21 Pro device to the PC using a USB cable. Ensure that the Meizu 21 Pro device is recognized in the Windows Device Manager.

Step 5: Open the command prompt in Windows and go to C:\Users\Your username\AppData\Local\Android\android-sdk\platform-tools

Step 6: Type ADB reboot recovery and the Meizu 21 Pro device will restart. The recovery menu must appear after this

Step 7: The device can be disconnected now. Now, you can remove the password or simply Factory Reset the Meizu 21 Pro device.

Now, you have successfully reset your device using a PC.

Although the first process is the easiest, in certain cases, you might have to look for other options too. Kindly follow the steps thoroughly and format your device with ease.

Part 4: Hard reset Android using Android Device Manager (Find My Device)

When someone loses their phone, or it is stolen, the two questions that commonly arise are: how to locate the phone? And if it is not possible, how to remotely wipe the phone’s data? People can use the Android Device Manager (also referred to as “Find My Device”) and do the exact two things. The best thing about this is that it doesn’t need to be installed as it is inbuilt on all Android Devices.

Let us look at the following steps to know how to reset Android phones to factory settings from the computer.

Requirements for Android Device Manager to Work:

• It must be activated in the Meizu 21 Pro device administrator settings. Go to settings > Security > Device administrators and check whether ADM is enabled as a device administrator or not.
• The location of the Meizu 21 Pro device must be ON
• The device must be signed in to a Google account
• The device must have an active internet connection
• The device should not be switched off
• Even if the Meizu 21 Pro device is without SIM, the Google account must be active

Steps to use ADM to wipe or locate any Android Device:

Step 1: Directly go to the Android Device Manager website , and log in to your account. You will get three options: “Play Sound”, “Secure Device” and “Erase Device”.

Step 2: Click on the “Play Sound” option will make it raise the alarm, notifying of the location, you can easily locate your Android phone if it is nearby.

Step 3: Click “Secure Device”, you can remotely lock your device with a new passcode, display a custom message on the lock screen, and even track the Meizu 21 Pro device’s location in real-time. It also gives you the option to add a contact number, so anyone who finds your device can reach out to you.

Step 4: Select “Erase Device” to reset your device. Once you select this option, the interface will take over and complete the job. Congratulations! You have successfully used the Android Device Manager (ADM) to reset your Android smartphone.

The Bottom Line

So these were the third different methods through which you can hard reset your Android device. Resetting the Meizu 21 Pro device involves removing every data from the Meizu 21 Pro device. The phone gets back to the same state as it was out of the box. Hence, most importantly, do not forget to back up data using Phone Backup and restore beforehand so that you do not end up losing anything important.

Is your Meizu 21 Pro working too slow? Here’s how you can hard reset it

If Meizu 21 Pro 3.4 hard reset or Meizu 21 Pro hard reset is the only option for your mobile phone, you can perform a factory reset to make your device function as it did on the first day. You may need a hard reset if it works slowly, hangs, you want to bypass screen lock, your memory is full, and you want to erase everything, you want to sell or give your device away, and you don’t want anyone to be able to access your files or passwords.

The following instructions will show you how to completely wipe up all of your data and restore the Meizu 21 Pro to its factory-fresh condition.

Part 1: Why do I Need to Hard Reset My Meizu 21 Pro?

We advise you to remove all accounts from the Meizu 21 Pro device before performing a factory reset, especially if you plan to sell, give away, or donate the 3.4. It is also a good idea to unlink the Google account. By doing this, we can prevent issues for new users as some more recent smartphones have a feature called FRP, or Factory Reset Protection, which requires the Google account or PIN number that was originally used to set up the Meizu 21 Pro when a device is factory restored.

Part 2: How to Hard Reset My Meizu 21 Pro

1. Fastboot Mode

• Shut down your phone.
• Add a USB cord to your computer or laptop.
• Your phone should now start up in Fastboot Mode after you press and hold the Volume Down + Power buttons for a few seconds. Meizu 21 Pro Recovery Mode and Fastboot Mode
• Using the ADB command, start Meizu 21 Pro in Bootloader Mode or Fastboot Mode.
• If your computer has ADB and Fastboot drivers installed, and your phone has USB debugging turned on, execute the command below after connecting it.
• Launch Command Prompt (CMD) on your PC, then type the command listed below.

reboot bootloader using adb

• After some time, you will see that your Meizu 21 Pro has been hard reset.

2. Hard reset with hardware key button

• Choose “wipe data/factory reset” on your Meizu 21 Pro to do a hard reset. Scroll down with the Volume buttons, and press the Power key to agree.
• Next, choose yes from the menu if further confirmation is required, and then click the Power button once.
• Lastly, press the Power key and choose the Reboot system.
• Do not forget to charge your phone.
• Initially, turn off your phone.
• Now Press the Volume Up + Power key for a few seconds to enter recovery mode.
• Press and hold the Power and Volume Up buttons at the same time until the Meizu 21 Pro device vibrates. Release all the presses if the Meizu 21 Pro logo or Recovery screen shows.
• You can give your phone up to 30 seconds to display the recovery screen.

Bonus Tips

Dr.Fone - Data Eraser

Dr.Fone - Data Eraser helps you quickly get rid of all the unwanted information and all of your data however it is always advisable to back it up using the Dr.Fone - Phone Backup.

Let’s see how you can delete completely all the data using Dr.Fone - Data Eraser. do not worry the next section is about how you can back up and restore the data before erasing it completely using Dr.Fone - Phone Backup.

Step 1: Connect your Meizu 21 Pro smartphone to your computer. Start Dr.Fone on your computer. Select “Data Eraser” from the tool list.

Connect your Meizu 21 Pro to the PC via a USB wire. Ensure that your phone has USB debugging turned on. You will see a pop-up window on your phone asking you to approve USB debugging.

Step 2: Begin wiping your Meizu 21 Pro phone.

Dr.Fone will then automatically recognize and connect to your Meizu 21 Pro smartphone. To begin wiping all of your data, select “Erase All Data.”.

Before proceeding, ensure that you have backed up any critical data because deleted data cannot be retrieved. After that, type “000000” to confirm your activity.

Dr. Fone will next proceed to wipe the data on your Meizu 21 Pro phone. The entire procedure takes only a few minutes. Turn off the phone and do not run any phone administration programs on the PC.

Step 3: Reset your phone’s factory data.

Once all app data, photos, and other private data have been completely erased, Dr.Fone will advise you to touch on Factory Data Reset or Erase All Data on the phone. You may use this to completely delete the phone’s settings.

Your Meizu 21 Pro phone has now been completely wiped, giving it the appearance of being brand new.

safe & secure

Dr.Fone - Phone Backup

Step 1: Connect your Meizu 21 Pro phone to your PC.

Launch Dr.Fone on your PC and choose “Phone Backup” from the list of options.

Then, connect your Meizu 21 Pro phone to the computer using a USB cord. Please ensure that the phone is in USB debugging mode. If your Meizu 21 Pro version is 4.2.2 or higher, a pop-up window on the Meizu 21 Pro phone will prompt you to accept USB Debugging. Please press the OK button.

To begin backing up the data on your Meizu 21 Pro phone, click Backup.

If you have previously used this application to back up your device, you may examine your backup history by clicking on “View backup history.”

Step 2: Choose which file types to back up.

After connecting the Meizu 21 Pro phone, pick the file types you wish to back up. Dr.Fone has already tested all of the file kinds for you. Then, to begin the backup process, click Backup.

The backup will take a few moments. Please do not detach your Meizu 21 Pro phone, use it, or erase any data from it during the backup process.

When the backup is finished, you can view the contents of the backup file by clicking the View the backup button.

safe & secure

The Bottom Line

Now that you know how to hard reset Meizu 21 Pro it is time to implement all the possible ways and see which one works for you. We also recommend you to proceed with backing up and restoration of all the information so that you will not have to repent in the end. It is all about using smart tools like Dr.Fone - Data Eraser and Dr.Fone - Phone Backup.

All About Factory Reset, What Is It and What It Does to Your Meizu 21 Pro?

I bought a new phone and want to sell my old Meizu 21 Pro 3, so I need to clear my data off it. Can someone guide me on how to factory reset the Meizu 21 Pro 3 so I can sell it?

As we all know, force restart and even factory reset can resolve many problems on our phones. Sometimes when you want to sell your old phone, you need to factory reset it to clear your data off it. Also, if there is some issue like a screen lock, you can factory reset it to unlock your phone. But do you know how to do a factory reset Meizu 21 Pro 3 correctly?

Therefore, we have gathered all that you need to know about a factory reset. After going through this article, you can factory reset Meizu 21 Pro phones. So, keep following to resolve your Meizu 21 Pro issues.

Part 1: What is Meizu 21 Pro Factory Reset?

Principles of Meizu 21 Pro Factory Reset

Before you reset your Meizu 21 Pro phone, you must ensure your data is all backed up someplace. It can be either on another device or transferred to the cloud. While changing your phone, you can exchange data from your old Meizu 21 Pro without much stretch. If you own a Meizu 21 Pro, a large portion of your data is put away securely in servers.

One way or another, you must twofold check these things before a factory reset:

• Google ID
• Contacts
• Pictures Gallery
• Passwords
• Music

Steps to Start Meizu 21 Pro Factory Reset

Now is the right time to factory reset Meizu 21 Pro when you have everything backed up. The following steps will help you factory reset your Meizu 21 Pro:

• On your Meizu 21 Pro, head into the settings application. Look over right down and search for System and click it. Look down and search for Reset options.

• Go to System and tap the “Erase all data” option.

• Note: After tapping this, the following page will allow you to see what will be cleaned from the Meizu 21 Pro device. Make sure everything is covered in your backup.
• Pick whether you need to delete any downloaded SIMs and tap Erase all data.

• You might need to enter your password to complete the reset.

Differences Between Hard Reset and Factory Reset

A factory reset deletes everything from your Meizu 21 Pro device. You might utilize a factory reset when your phone could have a virus or when it is seriously breaking down. A factory reset returns your Meizu 21 Pro to its factory settings, driving you to set it up again as a new phone.

A hard reset is a basic rebooting of your cell phone. It doesn’t influence the data on your Meizu 21 Pro. You might utilize a hard reset when your Meizu 21 Pro is acting slow. However, it is different from a standard reboot of your Meizu 21 Pro.

Part 2: What can Meizu 21 Pro Factory Reset do?

A factory reset deletes every user information, application, related application data, and settings on your pixel phone. It is like hard drive reformatting in a PC. However, a factory reset fixes different hardware and software-related issues. It also unlocks your phone in case you forget your lock screen password, or you need to factory reset Meizu 21 Pro before selling it to protect your privacy.

Part 3: 2 Easy Ways to improve your Meizu 21 Pro Factory Reset

1. Dr.Fone - Data Eraser

You can use Dr.Fone Data Eraser to reset your Meizu 21 Pro phone within minutes. Whether you need to sell your old Meizu 21 Pro or want to make it look like a new one, you can delete its files with Dr.Fone - Data Eraser. All private data and downloads are taken out. Moreover, you can delete your Meizu 21 Pro even if its software is corrupted. Additionally, you can erase specific documents on your Meizu 21 Pro also. The other Meizu 21 Pro data and settings will be protected in this case. So, here is the Wondershare Dr.Fone step-by-step guide to doing so:

safe & secure

• Launch the Wondershare Dr.Fone software and click the “Data Eraser” from the main window.

• Connect your Meizu 21 Pro and PC using a connector. Please make sure that USB Debugging is on in your Meizu 21 Pro.

• The software will automatically read your Meizu 21 Pro phone and start to erase your files. Click “Erase All Data.”

• Type in “000000” to affirm your activity and continue.

• Then, at that point, Dr.Fone will ask you to click the Factory Reset option on your Meizu 21 Pro. You can also select “Erase All Data” to reset your Meizu 21 Pro.

2. Dr.Fone - Phone Backup

As we mentioned before, we recommend you back up your files before a factory reset. You can use Dr.Fone - Phone Backup (Android) to back up data without any hassle and data loss. With this tool, backing up your Meizu 21 Pro has never been simpler. The program makes it simple to back up your Meizu 21 Pro data to the PC and recover supporting data for your Android gadget. Now let’s find out how you can back up and upload your Meizu 21 Pro files.

safe & secure

• Open Dr.Fone Phone Backup on your PC, and select the “Phone Backup” option.

• Connect your Meizu 21 Pro and PC through a USB connector. However, make sure to permit USB Debugging on your Meizu 21 Pro.

Click here


• Click “Backup” to begin the backup of Meizu 21 Pro data.
• After the connection, select the File types you need to upload. Of course, Dr.Fone has checked all the document types for you. Then click on backup to begin the process. It will require a short time. Kindly don’t detach your Meizu 21 Pro nor use it during the backup.

• After the backup is finished, you can tap on the “View the Backup” button to see what’s in the document.

The Bottom Line

Factory resetting is not ideal for some problems, but sometimes it becomes the only possible solution. So, if you have your phone stuck or want to sell your old phone, you need to factory reset Meizu 21 Pro. But make sure to back up your phone before going for a reset. You can back up your files before a factory reset using Dr.Fone - Phone Backup (Android).

safe & secure