3 Solutions to Hard Reset Motorola Razr 40 Ultra Phone Using PC

Find here 3 easy ways to hard reset Android using ADK or Android Device Manager from your PC. Also, do not forget to back up Android to PC before starting.

There are several cases when someone wants to know about how to hard reset an Android phone using PC. Such cases usually arise when your device is not accessible or stolen. It also involves situations when you forget the password or the unlock pattern of your device, or maybe your phone has frozen and is non-responsive. In such situations, it is very important to know how to reset Android phones to factory settings from the computer.

Factory reset will delete all your user data from internal storage. Thus it is also very important to back up all your internal data of the Motorola Razr 40 Ultra device before you hard reset Android via PC. Moreover, a hard reset should be your last option at hand to revive your Android device. Hence, in this article for all the users out there, we have picked up the solution on how to factory reset Android Phone using PC.

You must ensure that all the steps are followed in sync so that the hard reset Android via PC is successful.

Part 1: Back up Android before hard reset

Since factory reset involves removing all data, adjusted settings and logged accounts from the Motorola Razr 40 Ultra device; therefore, it is very important to back up all the data before moving on with the factory reset process. So, in this section, we will show you how to first back up your Android device using the Phone Backup . This is an easy-to-use and very convenient Android backup software that can be used to back up an Android device.

Wondershare Dr.Fone

Flexiblely Back up and Restore Android Data

• Back up Android data to the computer with one click.
• Preview and restore the backup to any Android device or iOS device.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restoration.

3,981,454 people have downloaded it

Let’s have a look at the easy process to back up Android before the factory reset it.

Step 1: After installation completes, connect your Android device via data cable and go to “My Backup”. Then, this tool will automatically detect your device.

Step 2: You can now see the file types that will be backed up, such as Contacts, Messages, Calendars, Videos, etc.

Step 3: Click on “Backup pow”  to proceed with the process. The backup process will start, keeping connected the Motorola Razr 40 Ultra device during the phone backup process.

Step 4: Within a few minutes, your whole device will be backed up. You can click “View Backups” to view all data that is backed up.

Phone Backup is one of the handiest and easy-to-use features within Wondershare Dr.Fone. Users can select their opted files manually to restore. This tool supports 8000+ Android devices worldwide. Users will feel safe and secure using this revolutionary software.

safe & secure

Part 2: Hard Reset Android using Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) is a user-friendly software tool that helps you unlock your Android device if you forget the passcode, pattern lock, PIN, or face/fingerprint lock. It supports various Android devices, allows you to bypass lock screens without data loss, and provides step-by-step instructions for easy unlocking. It also helps with FRP unlock and works on both Windows and Mac systems.

Step 1: Launch Dr.Fone - Screen Unlock on your computer and select “Screen Unlock” from the main interface. After that , you need to connect your Android phone to the computer using a USB cable.

Step 2: Choose “Android” > click “Unlock Android Screen” if you want to remove the lock screen. Choose your device brand. The hard reset methods vary for different device brands, so make sure that you choose the correct device brand.

Step 3: Put the Android phone into Specific mode with the help of Dr.Fone. And then, Dr.Fone will factory reset your Android phone within a few minutes. Now you can access your Android phone without a password!

safe & secure

In this process, we will learn how to hard reset Android phone to factory settings from a computer using SDK. This involves removing all data from the Motorola Razr 40 Ultra device using a PC.

Follow the given steps to know how to hard reset an Android phone using PC.

Pre-Requirements

• PC that runs on Windows (Linux/Mac installer is also available)

• You have to download Android ADB tools on your computer. Android ADB Download: https://developer.android.com/studio
• A USB Cable to connect your Motorola Razr 40 Ultra with your computer.

Steps to hard reset Android using SDK

Step 1: Enable USB Debugging in the Android settings. Open Settings>Developer options>USB Debugging. If developer options can’t be found on the Motorola Razr 40 Ultra device, then please go to Settings > General > About phone > Common > Software info (tap on it 5-8 times).

Step 2: Install Android SDK Tools. Ensure that Platform-tools and USB drivers are selected in the SDK manager window.

Step 3: Ensure that the drivers for your Android are installed on your PC or at least the Generic drivers are present

Step 4: Connect the Motorola Razr 40 Ultra device to the PC using a USB cable. Ensure that the Motorola Razr 40 Ultra device is recognized in the Windows Device Manager.

Step 5: Open the command prompt in Windows and go to C:\Users\Your username\AppData\Local\Android\android-sdk\platform-tools

Step 6: Type ADB reboot recovery and the Motorola Razr 40 Ultra device will restart. The recovery menu must appear after this

Step 7: The device can be disconnected now. Now, you can remove the password or simply Factory Reset the Motorola Razr 40 Ultra device.

Now, you have successfully reset your device using a PC.

Although the first process is the easiest, in certain cases, you might have to look for other options too. Kindly follow the steps thoroughly and format your device with ease.

Part 4: Hard reset Android using Android Device Manager (Find My Device)

When someone loses their phone, or it is stolen, the two questions that commonly arise are: how to locate the phone? And if it is not possible, how to remotely wipe the phone’s data? People can use the Android Device Manager (also referred to as “Find My Device”) and do the exact two things. The best thing about this is that it doesn’t need to be installed as it is inbuilt on all Android Devices.

Let us look at the following steps to know how to reset Android phones to factory settings from the computer.

Requirements for Android Device Manager to Work:

• It must be activated in the Motorola Razr 40 Ultra device administrator settings. Go to settings > Security > Device administrators and check whether ADM is enabled as a device administrator or not.
• The location of the Motorola Razr 40 Ultra device must be ON
• The device must be signed in to a Google account
• The device must have an active internet connection
• The device should not be switched off
• Even if the Motorola Razr 40 Ultra device is without SIM, the Google account must be active

Steps to use ADM to wipe or locate any Android Device:

Step 1: Directly go to the Android Device Manager website , and log in to your account. You will get three options: “Play Sound”, “Secure Device” and “Erase Device”.

Step 2: Click on the “Play Sound” option will make it raise the alarm, notifying of the location, you can easily locate your Android phone if it is nearby.

Step 3: Click “Secure Device”, you can remotely lock your device with a new passcode, display a custom message on the lock screen, and even track the Motorola Razr 40 Ultra device’s location in real-time. It also gives you the option to add a contact number, so anyone who finds your device can reach out to you.

Step 4: Select “Erase Device” to reset your device. Once you select this option, the interface will take over and complete the job. Congratulations! You have successfully used the Android Device Manager (ADM) to reset your Android smartphone.

The Bottom Line

So these were the third different methods through which you can hard reset your Android device. Resetting the Motorola Razr 40 Ultra device involves removing every data from the Motorola Razr 40 Ultra device. The phone gets back to the same state as it was out of the box. Hence, most importantly, do not forget to back up data using Phone Backup and restore beforehand so that you do not end up losing anything important.

Full Guide to Hard Reset Your Motorola Razr 40 Ultra

Motorola Razr 40 Ultra hard reset is needed when you wish to sell your phone or give it to someone. In such situations, you must have your data removed from the phone. So, to remove the whole data with a single click, there is no better method than a hard reset. A hard reset will remove photos, videos, contacts, applications, messages, etc. Therefore, you should use a reliable source to help save your system files. In this regard, we suggest Wondershare Dr.Fone.

Dr.Fone by Wondershare is a reliable tool for all your Android needs. It can erase, recover, unlock, back up, and do other things with just a single software. Therefore, this article explains how to reset Motorola Razr 40 Ultra and use Dr.Fone. We assure you that your privacy will be safe, and no file corruption will occur while using this program.

Part 1: Some Common Causes About Motorola Razr 40 Ultra Hard Reset

Some of the most common situations that require Motorola Razr 40 Ultra Hard Reset are:

• When you try to sell your Motorola Razr 40 Ultra phone or give it to others, you must delete your data. To do so, you must hard reset your phone.
• Too many wrong password/pattern attempts can lock your device. Hence, a hard reset will unlock your phone in recovery mode.
• If your device functions too slowly, a hard reset will make it faster. A hard reset will clear the cache and unwanted files, so your phone runs smoothly.
• Lastly, an Motorola Razr 40 Ultra hard reset prevents your device from constant crashes. Therefore, if your phone has some software issue, look no further.

Part 2: Easy Ways for Your Motorola Razr 40 Ultra Hard Reset

1. Hard Reset from Settings

Step 1: Before you continue with the hard reset or factory reset on your Motorola Razr 40 Ultra smartphone. However, make sure you have a backup of the important data put away on the phone.

Step 2: If you wish to do a straightforward hard reset, head to the Settings menu and search “Erase All Data” or “Factory Reset”.

Step 3: Tap the “Erase All Data” choice and snap on “OK” once you find it.

Step 4: Approve the command in the popup window. However, ensure that your Motorola Razr 40 Ultra phone has an adequate battery to start and reset. You can put your phone on charging if the battery levels are low.

2. Recovery Mode

Recovery mode assists you in opening the hidden features on your Motorola Razr 40 Ultra. By utilizing the Recovery mode, you can perform a hard reset on your device and wipe data. The following are the steps to get to the recovery mode on Motorola Razr 40 Ultra and complete the hard reset:

Step 1: Firstly, your Motorola Razr 40 Ultra must be turned off to perform a hard reset. Press and hold the power key on your Motorola Razr 40 Ultra smartphone for around 10 seconds to turn it off.

Step 2: Simultaneously, press and hold Power and the volume down keys until the Motorola Razr 40 Ultra logo springs up on the screen. That will raise the Recovery mode screen.

Step 3: Select your preferred language and tap on “Wipe Data”.

Step 4: You will be approached to enter the confirmation code (screen lock PIN).

Step 5: Complete the above steps and select the Format Data choice afterward.

Step 6: Click OK to finish the process, and that’s how to reset Motorola Razr 40 Ultra phone.

3. Dr.Fone-Data Eraser

Whether you intend to Change your phone/tablet or give them to somebody, you should delete your data. However, the physically deleted records on Android can be restored, especially with some expert tools. In light of this, the Dr.Fone Data Eraser ensures you erase information on Motorola Razr 40 Ultra permanently. It can’t be recovered using any means, including proficient tools. Here’s how:

• Open Dr.Fone on your PC and select “Data Eraser,” among other tools.

• Connect your Motorola Razr 40 Ultra phone to the PC through a USB cable.

• Click the “Erase All Data” button to eradicate all your data.

• Key in “000000” into the popup window to affirm your activity.

• Then, at that point, Dr.Fone will begin deleting all data on your Motorola Razr 40 Ultra phone.

• Then click the Factory Data Reset or Erase All Data on the phone. That will assist you with totally cleaning all the settings on the phone.

safe & secure

4. Dr.Fone-Phone Backup

Dr.Fone Phone Backup (Android) is a wonderful tool for backups and restoration that you can depend on totally. It has a backup feature that can back up a large portion of the Motorola Razr 40 Ultra files. Not just those, the backup tool can likewise recover files from your Android phone or tablet PC if you lose them unexpectedly. The method involved with backing up is quick enough. At the same time, you can select a few files to recover, which will save time. Here’s what you need to do:

• Open Dr.Fone on your PC, and select the “Phone Backup” tool.

• Then, at that point, connect your Motorola Razr 40 Ultra phone to the PC through a USB cable and tap on OK.

• Click Backup to begin the Backup of Motorola Razr 40 Ultra phone data.
• After the Android phone is connected, select the File types you need to back up. Of course, Dr.Fone has checked all the document types for you. Then click on Backup to begin.

• The process will require a couple of minutes.

• After it is finished, you can tap on View the backup button to see what’s in the backup record.

safe & secure

Conclusion

Above are some strategies with which you can do an Motorola Razr 40 Ultra hard reset. However, a backup is needed if you don’t want to lose your data after a reset. Therefore, in the end, we have mentioned the best tools for that purpose. You must consider these tools before going for a simple reset. Anybody can perform the last two sections (Dr.Fone tools) without issue. Therefore, we strongly suggest you download and install the Dr.Fone tool by Wondershare.

The Easiest Methods to Hard Reset Motorola Razr 40 Ultra

You can use Motorola Razr 40 Ultra A37 hard reset to solve your various smartphone problems. If your Motorola Razr 40 Ultra runs slower and its screen gets stuck, a hard reset can clear these problems. A hard reset also helps when you want to erase all data from your device before you sell. Suppose your phone runs out of storage. You can save your data on cloud storage and do a factory reset to free up space. You can also use it to unlock your device by removing the screen lock.

When you do a factory reset from settings, you will need the Motorola Razr 40 Ultra device’s password. Dr.Fone is the best tool to hard reset your Motorola Razr 40 Ultra without a password. It has an easy-to-use UI, and safe data backup features to enable users to back up their data before resetting. Here is the complete guide to hard reset your Motorola Razr 40 Ultra using three methods.

Part 1: In What Cases Should I Hard Reset My Motorola Razr 40 Ultra?

1: Can’t Unlock it (forgot password, too many wrong attempts)

Most people hard reset Motorola Razr 40 Ultra because they forgot the lock screen password. When you can’t remember your phone’s password, a hard reset is the fastest way to unlock your device. With a hard reset, you can delete all types of data and settings from your device. It helps you remove passwords, PINs, patterns, and fingerprint locks. Once you forget your phone’s password and enter the wrong password too many times, you will get a blocking alert. After another wrong attempt, the system will block your device. When you reach this point, you can only use a hard reset to unlock your device.

2: Motorola Razr 40 Ultra Works too Slowly

If your Motorola Razr 40 Ultra works slowly, such as taking time when you open any app, you can use a hard reset to fix this problem. When you are using a smartphone, you can easily find out if it’s working slower or not. If your device takes time to load games or shows lag when you watch videos, you can do a hard reset to clear its storage. When you reset Motorola Razr 40 Ultra, you clear its storage and cache, which helps your device work faster. It also removes junk files from your device.

3: Constant Crashes

Suppose your phone constantly crashes for no reason at all. Chances are that there is some problem with its software or new updates. When your device crashes, the screen gets stuck for some seconds before it automatically recovers. If it happens once in a while, then it is not a big problem. But, if it happens constantly, then you will need to fix your device before it gets even worse. An Motorola Razr 40 Ultra hard reset reverts it to its factory settings by deleting all data, personalization, settings, and updates. Doing so removes any type of threat and bug from your device.

Part 2: What to do to Hard Reset Motorola Razr 40 Ultra? 3 Easiest Ways for You

1: Hard Reset from Settings (password/pattern Needed)

The fastest way to hard reset Motorola Razr 40 Ultra is to use the factory reset option from settings. Although you don’t need a third-party tool for this method, it requires the Motorola Razr 40 Ultra device’s password or pattern. You can’t use this method on a locked Motorola Razr 40 Ultra device. Suppose your phone has some issues like slow working, frozen screen, app crashes, or keeps rebooting. In these situations, the Motorola Razr 40 Ultra hard reset is the best solution. Before factory resetting your device, create a data backup to recover it afterward. Here are the steps to hard reset Motorola Razr 40 Ultra from settings.

• Power on your Motorola Razr 40 Ultra and open “Settings.”
• Select “General Management” and tap on the “Backup and Reset” option.
• Now, select the “Factory Data Reset” option from the backup and reset menu.
• Tap on the “Reset Device/Reset Phone” option.
• Next, select the “Erase Everything” option and enter your phone’s password.
• Your device will automatically reboot after the factory reset is complete.

2: Enter Recovery Mode

You can hard reset Motorola Razr 40 Ultra by entering the recovery mode if you forgot your phone’s password. You can use this method in case your device is locked, and you can’t reach the settings menu to do a simple factory reset. It also helps if your phone is stuck at the boot logo and keeps rebooting. You will lose all your data with a hard reset from recovery mode. Only do a hard reset if you know your Google account and password. Because after the reset is complete, the system will ask you to unlock FRP. Here are the steps to hard reset your Motorola Razr 40 Ultra with recovery mode.

• Power off your Motorola Razr 40 Ultra with the power key, and make sure that you have at least 50% battery backup.
• Next, hold the volume down + power keys at the same time till the Motorola Razr 40 Ultra logo appears on the screen.
• Release both keys when you see the Motorola Razr 40 Ultra logo. After that, press the volume up key to enter the recovery mode.
• Scroll down to the “Wipe Data/ Factory Reset” option in the recovery menu using the volume keys. Select it by pressing the power key.
• Confirm your choice by selecting the “Yes” and “Delete all Data” options.
• After the process ends, select “Reboot System Now” and wait for your smartphone to restart.

3: Dr.Fone - Data Eraser (only for deleting data)

If you want to permanently wipe all data and settings from your Motorola Razr 40 Ultra, you can use Dr.Fone - Data Eraser. When your device is running out of storage or working slower, you can erase all of its data to fix these problems. Before you erase data from your device, you can use Dr.Fone to create a data backup with contacts, files, images, and your other personal data. This way, after erasing everything, you can easily recover anything you want. Dr.Fone is the best third-party tool with efficient solutions for any smartphone problem. You can use Dr.Fone to unlock devices, transfer WhatsApp, system repair, virtual location, and Data Backup & Reset. Follow these steps to hard reset Motorola Razr 40 Ultra with Dr.Fone - Data Eraser.

Dr.Fone - Data Eraser (Android)

Hard Reset Oppo A37 Without Any Hassle!

• Simple, click-through process.
• Wipe your Android completely and permanently.
• Erase photos, contacts, messages, call logs, and all private data.
• Supports all Android devices available in the market.

3,762,641 people have downloaded it

• Download and install Wondershare Dr.Fone on your PC. Launch the application and click on the “Data Eraser” tab on the main screen.

• Enable USB debugging on your mobile phone and connect it to your PC via a USB cable.

• After the connection is complete, Dr.Fone will recognize your smartphone and open the “Erase All Data” screen. Click on the “Start” option to continue.

• Next, type the code that appears on the screen for confirmation. After you enter the code, Dr.Fone will start erasing data from your device.

• Once the process ends, Dr.Fone will ask you to tap on the “Factory Reset” option on your smartphone. It will erase all settings and complete the factory reset.

safe & secure

Conclusion

Let’s end our guide for the easiest ways to hard reset Motorola Razr 40 Ultra. You can do a factory reset if you know your phone’s password. If you don’t know the password, you can do a hard reset from recovery mode. The safest and fastest way to erase all data from your device is by using Dr.Fone - Data Eraser. With Dr.Fone, you don’t have to follow complex steps, and you can back up your data so you can recover it after the reset is complete. Aside from that, you can use Dr.Fone to unlock your device without a password.