3 Solutions to Hard Reset Tecno Spark 20 Pro+ Phone Using PC

Find here 3 easy ways to hard reset Android using ADK or Android Device Manager from your PC. Also, do not forget to back up Android to PC before starting.

There are several cases when someone wants to know about how to hard reset an Android phone using PC. Such cases usually arise when your device is not accessible or stolen. It also involves situations when you forget the password or the unlock pattern of your device, or maybe your phone has frozen and is non-responsive. In such situations, it is very important to know how to reset Android phones to factory settings from the computer.

Factory reset will delete all your user data from internal storage. Thus it is also very important to back up all your internal data of the Tecno Spark 20 Pro+ device before you hard reset Android via PC. Moreover, a hard reset should be your last option at hand to revive your Android device. Hence, in this article for all the users out there, we have picked up the solution on how to factory reset Android Phone using PC.

You must ensure that all the steps are followed in sync so that the hard reset Android via PC is successful.

Part 1: Back up Android before hard reset

Since factory reset involves removing all data, adjusted settings and logged accounts from the Tecno Spark 20 Pro+ device; therefore, it is very important to back up all the data before moving on with the factory reset process. So, in this section, we will show you how to first back up your Android device using the Phone Backup . This is an easy-to-use and very convenient Android backup software that can be used to back up an Android device.

Wondershare Dr.Fone

Flexiblely Back up and Restore Android Data

• Back up Android data to the computer with one click.
• Preview and restore the backup to any Android device or iOS device.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restoration.

3,981,454 people have downloaded it

Let’s have a look at the easy process to back up Android before the factory reset it.

Step 1: After installation completes, connect your Android device via data cable and go to “My Backup”. Then, this tool will automatically detect your device.

Step 2: You can now see the file types that will be backed up, such as Contacts, Messages, Calendars, Videos, etc.

Step 3: Click on “Backup pow”  to proceed with the process. The backup process will start, keeping connected the Tecno Spark 20 Pro+ device during the phone backup process.

Step 4: Within a few minutes, your whole device will be backed up. You can click “View Backups” to view all data that is backed up.

Phone Backup is one of the handiest and easy-to-use features within Wondershare Dr.Fone. Users can select their opted files manually to restore. This tool supports 8000+ Android devices worldwide. Users will feel safe and secure using this revolutionary software.

safe & secure

Part 2: Hard Reset Android using Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) is a user-friendly software tool that helps you unlock your Android device if you forget the passcode, pattern lock, PIN, or face/fingerprint lock. It supports various Android devices, allows you to bypass lock screens without data loss, and provides step-by-step instructions for easy unlocking. It also helps with FRP unlock and works on both Windows and Mac systems.

Step 1: Launch Dr.Fone - Screen Unlock on your computer and select “Screen Unlock” from the main interface. After that , you need to connect your Android phone to the computer using a USB cable.

Step 2: Choose “Android” > click “Unlock Android Screen” if you want to remove the lock screen. Choose your device brand. The hard reset methods vary for different device brands, so make sure that you choose the correct device brand.

Step 3: Put the Android phone into Specific mode with the help of Dr.Fone. And then, Dr.Fone will factory reset your Android phone within a few minutes. Now you can access your Android phone without a password!

safe & secure

In this process, we will learn how to hard reset Android phone to factory settings from a computer using SDK. This involves removing all data from the Tecno Spark 20 Pro+ device using a PC.

Follow the given steps to know how to hard reset an Android phone using PC.

Pre-Requirements

• PC that runs on Windows (Linux/Mac installer is also available)

• You have to download Android ADB tools on your computer. Android ADB Download: https://developer.android.com/studio
• A USB Cable to connect your Tecno Spark 20 Pro+ with your computer.

Steps to hard reset Android using SDK

Step 1: Enable USB Debugging in the Android settings. Open Settings>Developer options>USB Debugging. If developer options can’t be found on the Tecno Spark 20 Pro+ device, then please go to Settings > General > About phone > Common > Software info (tap on it 5-8 times).

Step 2: Install Android SDK Tools. Ensure that Platform-tools and USB drivers are selected in the SDK manager window.

Step 3: Ensure that the drivers for your Android are installed on your PC or at least the Generic drivers are present

Step 4: Connect the Tecno Spark 20 Pro+ device to the PC using a USB cable. Ensure that the Tecno Spark 20 Pro+ device is recognized in the Windows Device Manager.

Step 5: Open the command prompt in Windows and go to C:\Users\Your username\AppData\Local\Android\android-sdk\platform-tools

Step 6: Type ADB reboot recovery and the Tecno Spark 20 Pro+ device will restart. The recovery menu must appear after this

Step 7: The device can be disconnected now. Now, you can remove the password or simply Factory Reset the Tecno Spark 20 Pro+ device.

Now, you have successfully reset your device using a PC.

Although the first process is the easiest, in certain cases, you might have to look for other options too. Kindly follow the steps thoroughly and format your device with ease.

Part 4: Hard reset Android using Android Device Manager (Find My Device)

When someone loses their phone, or it is stolen, the two questions that commonly arise are: how to locate the phone? And if it is not possible, how to remotely wipe the phone’s data? People can use the Android Device Manager (also referred to as “Find My Device”) and do the exact two things. The best thing about this is that it doesn’t need to be installed as it is inbuilt on all Android Devices.

Let us look at the following steps to know how to reset Android phones to factory settings from the computer.

Requirements for Android Device Manager to Work:

• It must be activated in the Tecno Spark 20 Pro+ device administrator settings. Go to settings > Security > Device administrators and check whether ADM is enabled as a device administrator or not.
• The location of the Tecno Spark 20 Pro+ device must be ON
• The device must be signed in to a Google account
• The device must have an active internet connection
• The device should not be switched off
• Even if the Tecno Spark 20 Pro+ device is without SIM, the Google account must be active

Steps to use ADM to wipe or locate any Android Device:

Step 1: Directly go to the Android Device Manager website , and log in to your account. You will get three options: “Play Sound”, “Secure Device” and “Erase Device”.

Step 2: Click on the “Play Sound” option will make it raise the alarm, notifying of the location, you can easily locate your Android phone if it is nearby.

Step 3: Click “Secure Device”, you can remotely lock your device with a new passcode, display a custom message on the lock screen, and even track the Tecno Spark 20 Pro+ device’s location in real-time. It also gives you the option to add a contact number, so anyone who finds your device can reach out to you.

Step 4: Select “Erase Device” to reset your device. Once you select this option, the interface will take over and complete the job. Congratulations! You have successfully used the Android Device Manager (ADM) to reset your Android smartphone.

The Bottom Line

So these were the third different methods through which you can hard reset your Android device. Resetting the Tecno Spark 20 Pro+ device involves removing every data from the Tecno Spark 20 Pro+ device. The phone gets back to the same state as it was out of the box. Hence, most importantly, do not forget to back up data using Phone Backup and restore beforehand so that you do not end up losing anything important.

Full Guide to Hard Reset Your Tecno Spark 20 Pro+

Tecno Spark 20 Pro+ hard reset is needed when you wish to sell your phone or give it to someone. In such situations, you must have your data removed from the phone. So, to remove the whole data with a single click, there is no better method than a hard reset. A hard reset will remove photos, videos, contacts, applications, messages, etc. Therefore, you should use a reliable source to help save your system files. In this regard, we suggest Wondershare Dr.Fone.

Dr.Fone by Wondershare is a reliable tool for all your Android needs. It can erase, recover, unlock, back up, and do other things with just a single software. Therefore, this article explains how to reset Tecno Spark 20 Pro+ and use Dr.Fone. We assure you that your privacy will be safe, and no file corruption will occur while using this program.

Part 1: Some Common Causes About Tecno Spark 20 Pro+ Hard Reset

Some of the most common situations that require Tecno Spark 20 Pro+ Hard Reset are:

• When you try to sell your Tecno Spark 20 Pro+ phone or give it to others, you must delete your data. To do so, you must hard reset your phone.
• Too many wrong password/pattern attempts can lock your device. Hence, a hard reset will unlock your phone in recovery mode.
• If your device functions too slowly, a hard reset will make it faster. A hard reset will clear the cache and unwanted files, so your phone runs smoothly.
• Lastly, an Tecno Spark 20 Pro+ hard reset prevents your device from constant crashes. Therefore, if your phone has some software issue, look no further.

Part 2: Easy Ways for Your Tecno Spark 20 Pro+ Hard Reset

1. Hard Reset from Settings

Step 1: Before you continue with the hard reset or factory reset on your Tecno Spark 20 Pro+ smartphone. However, make sure you have a backup of the important data put away on the phone.

Step 2: If you wish to do a straightforward hard reset, head to the Settings menu and search “Erase All Data” or “Factory Reset”.

Step 3: Tap the “Erase All Data” choice and snap on “OK” once you find it.

Step 4: Approve the command in the popup window. However, ensure that your Tecno Spark 20 Pro+ phone has an adequate battery to start and reset. You can put your phone on charging if the battery levels are low.

2. Recovery Mode

Recovery mode assists you in opening the hidden features on your Tecno Spark 20 Pro+. By utilizing the Recovery mode, you can perform a hard reset on your device and wipe data. The following are the steps to get to the recovery mode on Tecno Spark 20 Pro+ and complete the hard reset:

Step 1: Firstly, your Tecno Spark 20 Pro+ must be turned off to perform a hard reset. Press and hold the power key on your Tecno Spark 20 Pro+ smartphone for around 10 seconds to turn it off.

Step 2: Simultaneously, press and hold Power and the volume down keys until the Tecno Spark 20 Pro+ logo springs up on the screen. That will raise the Recovery mode screen.

Step 3: Select your preferred language and tap on “Wipe Data”.

Step 4: You will be approached to enter the confirmation code (screen lock PIN).

Step 5: Complete the above steps and select the Format Data choice afterward.

Step 6: Click OK to finish the process, and that’s how to reset Tecno Spark 20 Pro+ phone.

3. Dr.Fone-Data Eraser

Whether you intend to Change your phone/tablet or give them to somebody, you should delete your data. However, the physically deleted records on Android can be restored, especially with some expert tools. In light of this, the Dr.Fone Data Eraser ensures you erase information on Tecno Spark 20 Pro+ permanently. It can’t be recovered using any means, including proficient tools. Here’s how:

• Open Dr.Fone on your PC and select “Data Eraser,” among other tools.

• Connect your Tecno Spark 20 Pro+ phone to the PC through a USB cable.

• Click the “Erase All Data” button to eradicate all your data.

• Key in “000000” into the popup window to affirm your activity.

• Then, at that point, Dr.Fone will begin deleting all data on your Tecno Spark 20 Pro+ phone.

• Then click the Factory Data Reset or Erase All Data on the phone. That will assist you with totally cleaning all the settings on the phone.

safe & secure

4. Dr.Fone-Phone Backup

Dr.Fone Phone Backup (Android) is a wonderful tool for backups and restoration that you can depend on totally. It has a backup feature that can back up a large portion of the Tecno Spark 20 Pro+ files. Not just those, the backup tool can likewise recover files from your Android phone or tablet PC if you lose them unexpectedly. The method involved with backing up is quick enough. At the same time, you can select a few files to recover, which will save time. Here’s what you need to do:

• Open Dr.Fone on your PC, and select the “Phone Backup” tool.

• Then, at that point, connect your Tecno Spark 20 Pro+ phone to the PC through a USB cable and tap on OK.

• Click Backup to begin the Backup of Tecno Spark 20 Pro+ phone data.
• After the Android phone is connected, select the File types you need to back up. Of course, Dr.Fone has checked all the document types for you. Then click on Backup to begin.

• The process will require a couple of minutes.

• After it is finished, you can tap on View the backup button to see what’s in the backup record.

safe & secure

Conclusion

Above are some strategies with which you can do an Tecno Spark 20 Pro+ hard reset. However, a backup is needed if you don’t want to lose your data after a reset. Therefore, in the end, we have mentioned the best tools for that purpose. You must consider these tools before going for a simple reset. Anybody can perform the last two sections (Dr.Fone tools) without issue. Therefore, we strongly suggest you download and install the Dr.Fone tool by Wondershare.

How do I reset my Tecno Spark 20 Pro+ Phone without technical knowledge?

Resetting a Tecno Spark 20 Pro+ smartphone to factory settings could be necessary. You will probably need to do a hard reset if you want to unlock your smartphone or sell it to someone else. The majority of Tecno Spark 20 Pro+ devices may be quickly reset simply by pushing the volume and power buttons together. However, hard resetting a Tecno Spark 20 Pro+ sometimes is a whole other situation and may be much more difficult. That myth will be dispelled for you by us!

If the Tecno Spark 20 Pro+ device is functioning properly, hard resetting a Tecno Spark 20 Pro+ tablet without volume buttons won’t be too difficult and can be completed in a matter of taps. However, if the apparatus is broken, it may be an issue. Let’s have a look at all the possibilities.

Part 1: 4 Easy solutions to hard reset your Tecno Spark 20 Pro+

1. From recovery mode to delete all data

It’s not particularly difficult to reset a Tecno Spark 20 Pro+ smartphone or tablet, especially if it has a home button. You can only do a hard reset on a Tecno Spark 20 Pro+ tablet without volume buttons after entering recovery mode. Follow the procedures outlined below to learn how to reset a Tecno Spark 20 Pro+ tablet without volume buttons.

Step 1: First, press the power off and home buttons.

Press the power button repeatedly until the Power off, Restart, and other choices are shown. Now, choose “Power Off” and hold it down while tapping your phone’s home button.

At the same time, the Tecno Spark 20 Pro+ device.

Step 2: Verify the safe mode bootup.

The screen for restarting in safe mode will now show up. To switch to safe mode, select “Yes.”

Step 3: Switch to recovery mode

Your device’s power and home buttons must be pressed and held simultaneously until a new screen shows. Release the two buttons once it appears, then press the power button one more. Press and hold the home button for a moment. With that, recovery mode will start, and a new set of choices will show up on the screen.

Step 4: Select “Factory Reset” and navigate

Navigate down to the “Wipe data/factory reset” option using the home button. To choose the choice, press the power button.

2. Use the factory reset code to wipe data in Tecno Spark 20 Pro+

Step 1: Press the Volume Up + Power Keys at the same time as turning off your smartphone and removing the SIM card.

Step 2: The Tecno Spark 20 Pro+ logo will appear when the phone boots. Keep none of the keys.

Step 3: Scroll down to the Wipe Data / Factory Reset option using the volume down key.

Step 4: If you want to say “OK” and reset, press the Power Key.

To delete all user data, click “Yes.”

Step 5: The factory data reset process will begin on the phone.

After formatting is finished, click “Reboot System Now.”

3. Google Find My Device

Finding My Device:

Go to www.google.com/android/find on your computer’s web browser and sign in with the same Google Account you used on your phone.

When your phone is located, Find My Device will provide specific location information.

Do any of the following:

• If you’ve merely lost your phone, click Play sound to make it ring.
• If you’re using Find My Device for the first time, select Set up secure & erase to configure remote locking and erasing for your phone.
• To lock your phone and log out of your Google Account, click Secure device.
• If you wish to completely delete everything on your phone, choose Erase device.

The removal of all data from your phone’s storage, including applications, app data, and settings, will result from remotely wiping it. Personal information is one type of data that might not be completely removed. After doing this, you won’t be able to access your phone remotely.

4. Dr.Fone - Data Eraser

Step 1: Connect your Tecno Spark 20 Pro+ phone to the desktop. Get Dr.Fone running on your PC. Choose “Data Eraser” from the list of tools.

Utilize a USB cord to link your Tecno Spark 20 Pro+ phone to the PC. Make sure USB debugging is enabled on your phone. On your phone, there will be a pop-up window requesting you to authorize USB debugging if the Tecno Spark 20 Pro+ OS version is higher than 4.2.2. Click “OK” to move forward.

Step 2: Start erasing your Tecno Spark 20 Pro+ phone

Your Tecno Spark 20 Pro+ smartphone will then be immediately detected and connected by Dr.Fone. To begin wiping all of your data, click the “Erase All Data” option.

Make sure you have all the necessary data backed up before continuing because all wiped data cannot be recovered. After that, enter “000000” to verify your action.

Click here


The data on your Tecno Spark 20 Pro+ phone will then begin to be deleted by Dr. Fone. The entire process only requires a few minutes. Do not turn off the phone or launch any other phone management programs on the PC.

Click here


Step 3. Reset the factory data on your phone.

Dr.Fone will prompt you to tap on Factory Data Reset or Erase All Data on the phone once all app data, photographs, and other private data have been entirely removed. You may use this to entirely erase all of the phone’s settings.

safe & secure

Part 2: FAQs

1. Is there any simple tool to have my Tecno Spark 20 Pro+ backup? (Dr.Fone - Phone Backup)

Yes, there are very few simple tools available that you can use to back up your Tecno Spark 20 Pro+ phone. One such tool is Dr.Fone - Phone backup which is super simple to use and extremely beginner friendly and how you recover all of your lost data from your Tecno Spark 20 Pro+ phone.

2. Do these solutions damage my Tecno Spark 20 Pro+?

Unfortunately, many of the solutions that you used to recover or back up your Tecno Spark 20 Pro+ phone damage the quality of the information and also the hardware or software of your Tecno Spark 20 Pro+ mobile however the best solution to this problem is using Dr.Fone - Phone backup which is a supplied tool which does not cause any problem during or after its usage and help you recover all kind of lost data.

The Bottom Line

Now that you know how to reset a Tecno Spark 20 Pro+ phone that is locked and how to use Tecno Spark 20 Pro+ hard reset code to reset Tecno Spark 20 Pro+, it is time to implement resolution though you can try, and among the ways given above, the best solution is to go with the Wondershare Dr.Fone - Phone Backup. It is a great tool that will immediately help you recover all of your lost information from your Tecno Spark 20 Pro+ phone without causing any harm to your device.

safe & secure