4 Ways to extract data from corrupt Excel file

Summary: Excel files can become corrupt due to numerous reasons. This blog will discuss the reasons behind the corrupted Excel files. Sometimes the file becomes inaccessible. This post includes four ways to extract data from a corrupt Excel file. It also mentioned Stellar Repair for Excel to repair severely corrupted files. The tool helps you recover data from damaged Excel files with complete integrity.

Imagine the frustration of an employee if an Excel workbook he took hours to complete became corrupted for some reason threatening to erase all the data saved in it. Not just that, a corrupted Excel workbook can wreak havoc for the organization too since it poses a risk of permanently deleting critical business information like work records or employee trackers.

Unless a backup of all important Excel files exists, recovering data lost due to damage/corruption to them is next to impossible. However, we’ve conducted some research and found some pretty neat hacks to help you extract data from corrupt excel files without much hassle.

Primary reasons triggering Excel file corruption

As we always point out, to solve a problem for good, getting to its root is imperative. Here are the main reasons that cause Excel file corruption. Knowing these reasons can help you keep Excel corruption at bay for a considerably long time.

• Abrupt system shutdown when you’re editing an Excel sheet
• Bugs / Defects in your Excel application or installation
• Hardware failures like bad sectors on the hard drive where Excel sheets are saved
• Virus Infection / Malware Attack
• Excessive data storage within a single Excel file
• Faulty Excel Macros and CSE Formulas

Depending upon the extent of damage, there can be several ways to perform corrupt Excel file repair.

How to repair corrupt Excel files?

There are a couple of manual methods that can help you repair corrupt Excel files .

1. If the damaged Excel sheet can be opened, immediately save its copy; thereafter:
   • Open it with a later version of Excel and save it as a new workbook.
   • If this doesn’t work, open it in Excel’s latest version and save the workbook in HTML or HTM format.
   • Once this is done, reopen the HTML file and save again in XLS format.
   • Lastly, open the file and try saving it in SLK format (symbolic link)

Note: It is important to note that saving an Excel workbook in HTML format causes loss of features like custom views, scenarios, unused styles or number formats, natural language formulas, data consolidation settings, custom function categories, etc. In SYLK format only the active worksheet is saved so if using this method, you’ll need to repeat these steps for each worksheet.

2. Use Excel’s inbuilt Repair function as follows:
   • Launch Microsoft Excel and go to Office button -> Open
   • In the Open dialog box, select the damaged Excel file
   • On the bottom-right corner of the Open dialog box, you will find a drop-down next to Open Click on it and select Open and Repair
   • This will launch the inbuilt Repair module of Excel and you’ll see a dialog box asking you to select an option from Repair or Extract Data
   • Click on Repair to initiate the repair process.
   • If this doesn’t work, repeat steps 1-4, and when Excel asks you to select an option, select Extract Data from corrupt excel file. Thereafter, follow the instruction Excel shows and you should be able to retrieve your data, but you may end up losing some formulas.
3. If you cannot open the Excel, download Spreadsheet viewer from the Microsoft website and open the file using this program. Thereafter copy all data into a new Excel.

Note: This method will cause much of your formatting, formulas, and more to be lost.

4. You can download Open Office from its official website OpenOffice.org and try opening the Excel in it. The two programs are very similar so all data should automatically align in the correct place and with the correct formatting.

Note: With this method, VBA code cannot be recovered due to incompatibility between OpenOffice.org and Excel.

Full-proof method for corrupt Excel file repair

If you find the above methods confusing, or you wish to perform Excel file repair without having to face any data and formula loss, or you cannot achieve the desired results with any of these methods, stop wasting any more time with methods that will only frustrate you more. Instead, download the sure-shot solution for dealing with severe Excel corruption –Stellar Repair for Excel  and relax!

Stellar Repair for Excel is the best choice for repairing corrupt or damaged Excel (.XLS/.XLSX) files and restoring everything to a new blank Excel file. This competent software can skillfully repair single as well as multiple XLS/XLSX files while preserving worksheet properties and cell formatting. If you have this product by your side, you don’t need to worry about Excel corruption errors ever again.

To Conclude

Instead of giving up on corrupted Excel sheets, try repairing them with the simple tricks we’ve described. And if they don’t work, keep calm and turn to Stellar Repair for Excel.

‘Unable to Save Excel Workbook’ Issue [Fix 2024]

Summary: You may unable to save your Excel Workbooks due to several reasons. Many users have reported this issue on the Tech Forums. This blog will discuss a few instances when users cannot save their Excel files. It lists the causes behind the issue and their possible solutions. It also mentions the Stellar Repair for Excel to fix the saving error if it is due to corruption in the Excel file.

It is easy to work with Microsoft Excel but sometimes, the application may create issues thereby hampering the smooth functioning of the workbook. One such issue is “unable to Save Excel Workbook”.

Let’s take a look at the issue of Unable to Save Excel Workbook

Instance 1:

In an organization, users connected to one of the servers (Windows 2008 R2) using Citrix – a Terminal Server configured with Windows 2008 R2 –and accessed their data through a File Server, also configured with Windows 2008R2. Since the connectivity to Shared Drive was established through a Terminal server, any conflict amongst the server configuration may create conflict in shared file.

This issue was discussed at length at one of the Tech Forums , where the users were unable to access their workbooks stored on the shared drive. The File menu did not work. As a result, the users were forced to save the workbook by creating quick access shortcuts or locally on the desktop. In many cases, the saving option was ruled out completely.

Instance 2:

A similar problem was reported, wherein the users received an error when saving an Excel workbook after inserting a chart in an existing workbook (previously saved) or copying values from an existing workbook. A system is configured with Windows 7 and Microsoft Office 10 configuration. The issue arises when the user is unable to save the changes after editing in a saved spreadsheet. The following message displays on the screen:

Figure: Unable to Save Excel WorkBook Issue

Further, if the user clicks ‘Continue’, the following error message is received:

“Excel encountered errors during save. However, Excel was able to minimally save your file to <**filename.xlsx**>”.

Note: This issue impacts build Version 1707 (Build 8326.2086) and later, and also only occurs with files that are stored locally, such as on the desktop. This problem does not occur if you manually enter values or insert a chart in a newly created workbook.

Plausible reasons for the ‘Unable to save Excel workbook’ Issue

1. The issue was detected in Microsoft Office Professional Plus 2010 32-bit, Service Pack 14.0.6029.1000.
2. Excel version on the user system may or may not match with Excel version on File server.
3. The issue of ‘Unable to Save Excel Workbook’ impacts only the Build Version 1707 (Build 8326.2086) and later.
4. In case of Issue 2, the problem surfaces when the user adds files, tables or charts in the locally saved excel files, such as on the desktop.

Methods to fix the ‘Unable to Save Excel Workbook’ Issue

There may be an issue with the Build version or the Registry Values settings may not be appropriate, which does not allow the Excel workbooks to save.

But, before starting to resolve the issue, verify the following:

1. The location where the file is to be saved may not have enough space to save the Excel file: Check the available space and save again. You may also use the option of ‘Save As’ to save the file at a new location.
2. Excel file may be a shared one where edits are not allowed by a specific user: There are restrictions attached to documents and other files shared over the network. Check for these restrictions.
3. Antivirus may interrupt in during file saving: Antivirus in the system may not allow saving of the files. Request the system administrator to uninstall the antivirus and reinstall after saving.
4. The file is not saved within 218 characters: If the file is not saved due to the naming issue, then check the character length and try again.
5. Differences in Windows versions of the local system and those on network drive may cause excel not saved issues. Check that all the systems have the same configuration and are updated to the recently available versions.
6. Excel spreadsheet is corrupt: If none of the above factors have not caused hindrance in saving the file, then there may be a probability of corruption in the Excel spreadsheet .

Once verified, look for a healthy and restorable backup. If backup is missing, resolve the issue of “Unable to open Excel File” with manual settings on local system or through a reliable Excel repair software.

Method 1: Modify Registry Entries

If multiple users are unable to access their workbooks stored on the shared drive and facing unable to save Excel file problem (see Instance 1 above), then follow the below steps:

1. Go to ‘Registry Entry’. To do this, type ‘regedit’ in the Start Search box, and press ENTER

Figure: Edit Registry

2. You are prompted for the administrator password or for a confirmation, type the password, or click Continue
3. Locate the following registry subkey, and right-click it: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\CSC

Figure: CSC Location

4. Point the cursor to New, and click Key

Figure: Create new key

5. Type ‘File Parameters’ in the available box

Figure: File parameters

6. Right-click Parameters, point the cursor to New, and click DWORD (32-bit) Value

Figure: File parameter (DWORD – 32 bit) value

7. Type ‘FormatDatabase’, and press ‘ENTER’. Right-click ‘FormatDatabase’, and click ‘Modify’

Figure: Modify format database

8. In the Value data box, type ‘1’, and click ‘OK’

Figure: Value data

9. Exit ‘Registry Editor’
10. Restart the system and verify if the files can be saved now

Method 2: Try Google Uploads

If the user is unable to save the changes after editing in a locally saved spreadsheet (see Instance 2 above), then follow these steps:

1. Upload the unsaved Excel file to Google Docs. Ensure that the file gets converted to Google Sheets format.
2. Check if all the formulae are active and working.
3. Make changes to the Google Sheet and verify that all the changes are working fine.
4. Use the Google Sheets export feature to download the file in Excel format.

Method 3: Resolve manually with Open and Repair

If the Excel file is found to have corruption, try out the Excel Open and Repair utility:

1. Open a blank Excel File. Go to File and Click Open.
2. Go to Computers and click Browse.
3. Access the Location and Folder and click the arrow icon beside Open followed by Open and Repair.

Figure: Illustrates Steps to use ‘Open and Repair’ method

The Open and Repair utility is not competitive enough and may not fix corruption in severely corrupted files. Hence, if you are unable to save Excel workbook after applying the manual methods, then you can search for a useful software-based repair utility.

Method 4: Excel File Repair Software

Specifically meant to resolve Excel file corruption. Stellar Repair for Excel helps you to repair every single object including charts, tables, their formatting, shared formulae and rules and more.

1. Install and Open the software and select the corrupt Excel File. You can also click the Find option if the file location is not known.
2. Click Scan and allow the software to scan and repair the corrupt Excel file.
3. Once repaired, the software displays the fixed file components to verify its content.
4. Click Save to save the file data in a blank new file as ‘Recovered_abc.xls’, where abc.xls is the name of the original file.

See the working of the software which has been declared as a tool that provides 100% integrity and precision.

The Excel repair software takes care to save the repaired data in a new file to minimize the chances of further corruption.

Conclusion

‘Unable to save Excel file’ is a generic problem that may appear due to various reasons. In this blog post, we presented some of the actual instances reported by users on community forums.

Windows updates, the Build versions, the Service Packs of the local systems and those on the network drive must be either similar or in sync with each other. Any deviation may cause issues in accessing or saving the Microsoft files, as reported in Instance 1 is caused where user is unable to save Microsoft Excel file on the Network Drive. In case, the user is unable to save the file on network drive then the problem lies with the Registry value.

Another case is when the users receive an error while saving an Excel workbook after they insert a chart in an existing workbook or copying values from an existing workbook. This issue is known to affect build Version 1707 (Build 8326.2086) and later, and only occurs with locally stored files.

When a user is unable to save a specific Excel file, then the problem can be resolved using the manual methods or the software based utility. The mode of repair depends upon the level of corruption in Excel file.

Hence, it is suggested to analyze the nature of the problem and decide an appropriate resolution method.

Simple ways to Open Corrupt Excel file Without any Backup

Summary: The blog describes simple ways to open corrupt Excel file without any backup. It explains some manual workarounds that you can try to open the file. Also, it mentions about an Excel file repair tool that can quickly fix the corrupt file and recover data from it.

Do you have an Excel file that does not open because of corruption issue? And every time you try to open it, an error message ‘the file is corrupt and cannot be opened’ pops-up?

Excel File Corruption Message

Also, you don’t have a healthy backup of the Excel file to restore the data? If so, you can try repairing the corrupt file by using a few simple yet effective manual workarounds mentioned below.

How to Open a Corrupt Excel File without Backup?

Following are some manual methods that can help you open a corrupt Excel file:

Method 1: Repair Corrupt Excel File

When attempting to open a corrupt file, Excel automatically starts ‘File Recovery’ mode to repair the file. But, if the recovery mode doesn’t start, try Microsoft Excel’s built-in ‘Open and Repair’ feature to manually repair the file.

To use this feature, perform the following steps:

Step 1: Open a Blank workbook in Excel, and then click File > Open.

Step 2: In the Open window, browse and select the corrupt file.

Step 3: Click the arrow that is beside the Open tab, and select Open and Repair.

Open and Repair Option

Step 4: Implement one of the following:

• Click the Repair button. (This is to recover as much data as possible.)
• Click the Extract Data button. (This is to recover values and formulas from the Excel file if the repair process fails to recover the entire data.)

Excel Built-in Repair Options

If using Open and Repair does not work , move to the next method.

Method 2: Disable the Protected View Feature

Some Excel users have reported that turning off the ‘protected view’ feature in Excel helped them open the corrupt file. You can also try to disable this feature and open the file. To do so, follow these steps:

Step 1: Open a blank Excel file, click on File > Options.

Step 2: In the Excel Options window, select Trust Center, and then click Trust Center Settings.

Excel Trust Center Settings

Step 3: Click OK.

Now check if you can open the corrupt file. If not, try implementing the next method.

Method 3: Look For Automatically Recovered Excel File

If you have Excel’s AutoRecover feature enabled, you’ll have access to a copy of the Excel file corrupted or lost due to application crash, power outage, or accidental deletion.

The ‘AutoRecover’ feature saves Excel worksheets at a temporary location after a certain time interval. It saves the worksheets automatically and is turned on by default to reduce the chance of data loss.

Check if you can recover corrupted Excel file by following these steps:

Step 1: In Excel, open a Blank workbook.

Step 2: Go to File and click Options.

Figure 5 – Excel Options

Step 3: In the Excel Options dialog box, click Save, and then copy the ‘AutoRecover file location’.

Excel Options Window

Step 4: Open File Explorer window and paste the copied AutoRecover file location, and press Enter.

Step 5: A list of saved Excel files will be displayed. Choose the file you want to recover.

TIP: Use Excel’s AutoBackup feature to reduce chances of data loss, by saving a previous version of your spreadsheet automatically.

Use an Excel File Repair Software

If the above manual methods fail, repair the corrupt Excel file by using a third-party software, such as Stellar Repair for Excel**.** The software helps repair Excel (XLS and XLSX) files easily and effectively.

Read this: How to repair corrupt Excel file using Stellar Repair for Excel?

Some key features of Excel Repair software are as follows:

• Fixes all errors in the MS Excel file.
• Repairs multiple damaged Excel files in a go.
• Recovers chart, chart sheet, table, cell comment, image, formula, and sort & filter.
• Preserves properties and cell formatting of Excel worksheets.
• Previews recoverable Excel file data before saving.
• Recovers all data components from the corrupt files and saves them in a new blank Excel file.
• Compatible with Excel 2019, 2016, 2013, 2010, 2007, and lower versions.

Conclusion

You can try the workarounds discussed in the blog to open a corrupt Excel file without a backup. Disabling the protected view feature can help you open the file. If the issue persists then try repairing the corrupted Excel file using the Open and Repair utility. Although, it may not be able to fix a severely corrupted workbook. In such a case you can use Stellar Repair for Excel . It is an advanced tool that can help you repair a corrupted Excel file with 100% integrity.

How to Fix ‘Sharing Violation Error’ when Saving Excel?

Summary: You may encounter the sharing violation error in Excel when you repeatedly save changes in a workbook. The error can occur due to different reasons. In this blog, we will discuss the possible reasons behind this sharing violation error and some effective solutions to fix it. If the issue has occurred due to corruption in Excel file, you can try the advanced Excel repair tool mentioned in the post to repair the corrupted file.

It is not uncommon to encounter errors while working with Excel application. One common error that Excel users face is the sharing violation error that occurs while saving an Excel spreadsheet. The complete error message says, “Your changes could not be saved to file because of a sharing violation.” When this error occurs, users won’t be able to save the changes in the file. So, it is important to fix this issue as soon as possible. But before fixing the error, let’s find out the causes behind this error.

Causes of Excel Sharing Violation Error

This error may pop up due to the below reasons:

• The file you are trying to save is corrupted.
• The Excel file is not in the trusted location.
• Sharing Wizard is disabled.
• You do not have permission to modify the Excel file.
• The Excel file is not permitted to get indexed.

Methods to Fix the Sharing Violation Error in Excel

You can move the affected Excel file to a new folder and save it with a different name. Then, see if it fixes the error. If it doesn’t help, you can try the below methods.

Method 1: Check and Change the Excel File Properties

You can get the sharing violation error in Excel if the file attribute options, such as “File is ready for archiving” and “Allow this file to have contents indexed in addition to file properties” are disabled. You can check the File Properties and enable these options to fix the issue. Here are the steps:

• Right-click on any Excel file and select Properties.

• In the Properties window, click on the Advanced option.

• In the Advanced Attributes window, select the below options under File attributes:
• File is ready for archiving.
• Allow this file to have contents indexed in addition to file properties.

• Click OK.

Note: If these options are already selected, then unselect and re-select them.

Method 2: Enable Sharing Wizard Option

The error “Your changes could not be saved to file because of a sharing violation” can also occur if the sharing wizard option is disabled on your system. You can check and enable the sharing wizard option using these steps:

• Go to your system’s Documents folder.
• Click View > Options > Change folders and search options.

• In the Folder Options window, click View.

• Under the View section, search for the “Use Sharing Wizard” option in the Advanced Settings.

• If the Use Sharing Wizard option is unselected, select it and then click OK.

Method 3: Move the Excel File to a Trusted Location

You can encounter the sharing violation error if the file you are trying to save is not in the trusted location. You can try moving the file to a trusted location by following these steps:

• In Excel, go to File and then click Options.
• Click Trust Center and then click Trust Center Settings.

• In the Trust Center window, click Trusted Locations and then click Add new location.

• In the Add new location window, select Browse to locate and choose the folder, and then click OK.

Method 4: Open Excel in Safe Mode

Incompatible add-ins can create issues in the Excel file. To check if the sharing violation issue has occurred due to add-ins, open Excel in safe mode. To do so, follow these steps:

• Open the Run window using Windows + R.

• Type excel /safe and click on OK.
• Open the affected file and then try to save the changes.
• If you are able to save the changes without any error, then it indicates add-ins are causing the issue. To fix this, you can remove the recently downloaded add-ins (if any).

Method 5: Repair the Excel File

Corruption in Excel file can also create issue while saving the changes. In such a case, you can repair the corrupted Excel file using the inbuilt utility in Excel, named Open and Repair. Follow these steps to use this utility:

• In Excel, navigate to File > Open > Browse.
• In the Open dialog box, click on the affected Excel file.
• Click the arrow next to the Open button and select Open and Repair from the dropdown.
• Click on the Repair option to recover as much data from the file as possible.

If the above utility fails to fix the corrupt Excel file, then you can use a more powerful Excel repair tool , such as Stellar Repair for Excel. This Excel repair tool can repair even severely corrupted or damaged Excel files (xls, .xlsx, .xltm, .xltx, and .xlsm). This tool can recover all the data from the corrupted Excel file, including images, chart sheets, formulas, etc., without changing the original format. It can help in fixing common corruption-related errors in Excel. You can download the software’s demo version to scan the corrupt file.

To Conclude

Above, we have discussed some effective methods to fix the sharing violation error in Excel. This error may also occur if you try to save the Excel file in an incompatible format. So, check the format and try saving the file in a compatible format. If the error occurs due to Excel file corruption, you can repair corrupt Excel file using the Open and Repair tool. If nothing works, then download a third-party Excel repair tool, such as Stellar Repair for Excel. It is an advanced tool that can fix severely corrupted Excel files. You can install this repair tool on any Windows system.

How to Fix “Errors were detected while saving Excel” Error?

When trying to save the Excel file, you might face unexpected errors. The “Errors were detected while saving Excel” is one such error. It can also occur when using VBA in Excel. The complete error message appears as:

**“Errors were detected while saving [file name]. Microsoft Excel may be able to save the file by removing or repairing some features. To make the repairs in a new file, click Continue. To cancel saving the file, click Cancel.”
**

The error can occur if the features (Pivot tables, charts, macros) used in the Excel file get corrupted . However, there could be several other reasons behind the occurrence of the error. Let’s discuss them.

What Causes the “Errors were detected while saving Excel” Error?

There are various reasons why you encounter this error. Here are some of them:

• Incompatible pivot table in the Excel file
• Large or uncompressed images in the Excel file
• File-sharing properties are not allowing file saving
• Excel file is corrupted
• Large-sized Excel file
• File version incompatibility
• VBA code is corrupted

Ways to Fix the “Errors were detected while saving Excel” Error

You’re not able to save the Excel file if there is no storage space on your hard drive. So, first check if your hard drive has sufficient storage space to save the file. If this is not the case, then it might happen that your antivirus program is interrupting the saving process. To check this, temporarily disable your antivirus program and then try to save the file. If still your Excel is throwing the “Errors were detected while saving Excel” error, then follow the below given methods to fix the error:

Method 1: Open the Excel in Safe Mode and Disable the Add-ins

When you open Excel in safe mode, it opens without the third-party add-ins. This helps in finding out if any add-ins are causing the error.

 Here’s how to open the Excel in safe mode:

• Open the Run window by pressing Windows key + R.

• Type excel /safe in the Run window.

  ?

• Next, click on OK.

• It will open Excel in safe mode.

• Now, try to open and save the affected file.

If you are able to save the file without any issue, then this means that the error has occurred due to third-party add-ins or settings. You can try disabling the add-ins to fix the issue. To do this, follow these steps:

• First, open Excel.
• Then, go to the File tab and click Options.

• In Excel Options, click on the Add-ins

• Under the Manage section, select Excel Add-ins and then click on the Go

• In the Add-ins dialog box, unselect the add-ins under the Add-ins available option and click OK.

  

Note: Disabling add-ins does not remove them from the system. To remove them permanently, you need to uninstall them.

Method 2: Check the Excel File Name

Some users have observed this error when saving the Excel file with an invalid name. You can check the file name and ensure that it should not contain more than 218 characters. If the name exceeds the required limit, then try shortening the file name or move the file to a folder with a short path name.

Method 3: Copy the Data from the Affected File to a New File

If you are not able to save the Excel document, then try copying the data from the affected file to a new Excel file. Then, save the new file with a different name. This helps in resolving the issue.

Method 4: Check and Provide File Permissions

You may experience the “Errors were detected while saving Excel” issue when you do not have desired permissions to modify the folder in which your Excel file is located. To modify the folder, you should have read, write, and create permissions. You can check and provide the desired permissions using the below steps:

• Navigate to the Windows Program Files and then find the desired folder (where the Excel file is saved).
• Right-click on the folder and then choose Properties.
• Select the Security tab and then click
• Click on Change Permissions in the Advanced Settings
• Click Administrators and then click Edit.
• Now set the Apply to drop-down button to This Folder, Subfolder, and Files.
• Click on the Full Control field and then click Apply > OK.

Method 5: Check Pivot Tables in Excel Sheet

You can review Pivot tables to see if they are causing the “Errors were detected while saving Excel” error. To do so, follow the below steps:

• Click Power Pivot > Manage.

  

• Check the tabs in the Power Pivot

• Check if all the formulas used in the table are correct. Sometimes, even a small typo can create an issue in Excel.

Method 6: Repair Your Excel File

The “Errors were detected while saving Excel” issue can also occur if the Excel file is corrupted. In such a case, you can take the help of the built-in utility in Excel – Open and Repair to repair your Excel file. Here’s how to use the tool:

• In Excel, click the File tab and then click Open.
• Click Browse to select the desired file.
• The Open dialog box is displayed. Click on the corrupted file.
• Click on the arrow next to the Open button and then click Open and Repair.
• Click on the Repair

• After repair, a message will appear (as shown in the below figure).

  

• Click Close.

 However, sometimes, the Open and Repair utility fails to fix the file if it is severely corrupted or large-sized. In such a case, you can take the help of a third-party Excel repair software, such as Stellar Repair for Excel. The tool performs a comprehensive scan of the corrupted Excel file to fix the issues and recover all the items from the file without changing the original formatting. It can recover pivot tables, charts, images, engineering formulas, etc. The tool is compatible with Windows 11/10/8.1/8/7. You can download the free trial version of the tool to evaluate its functionality.

Closure

Many Excel users reported facing the situation when they are saving the Excel file. You can check the file’s compatibility to fix the “Errors were detected while saving Excel” issue. If you are getting this error in a Macro-enabled file then you can try deleting the VBA project from a document to resolve the issue. However, deleting the entire VBA code cannot be a better solution as it can lead a data loss in the Project you are working on. In the above article, you have learned the reasons behind the issue and discovered how to fix the error. Follow the methods and if none of them works then try using Stellar Repair for Excel. It is an advanced tool that can quickly repair corruption in Excel worksheets at any level. It lets you restore the corrupted components from the corrupted file without removing the existing data.

How to Repair Excel Document on a Flash Drive

Summary: Microsoft Excel files are stored on flash drives if they need to be transferred between systems or if they need to be backed up. But sometimes unforeseen issues can corrupt the Excel sheets stored on flash drives. When that happens, it can be an arduous task to repair Excel documents on a flash drive. Through this post let us try to understand the reasons why Excel sheets stored on flash drives can get corrupted and how users can resolve them easily.

In this digital age, we all work with computers, files, and documents. Flash drives or USBs are common ways of storing data in an external place. Be it for a meeting or for a party playlist, these devices come handy when one wants to transfer data or access the files stored elsewhere.

You may need to access your data from another location. That’s when a USB flash drive might come in handy. And, that’s exactly why Excel sheets too end up on flash drives; either that or for backup purposes. However, there are many instances where an Excel file stored in a USB gets corrupted when one tries to access the file. The error message you get while trying to open the Excel file would be a great clue for figuring out the exact reason behind corruption.

This blog will provide insights into what are the reasons for the corruption of a USB and how the users can repair Excel on flash drive that has been corrupted.

Reasons for USB inaccessibility

Sometimes flash drives or USBs can become unresponsive due to numerous reasons. There are two types of corruption – logical and physical. Physical corruptions occur due to broken stems and connectors, broken circuits, NAND gate, not recognised, RAW, need to format, not accessible, and dead drives (no power supply).

One of the main reasons behind such an error could be that the USB drive has been infected by some virus. This can affect any file – not only the ones which are there in the USB drive but also the ones which are there in the PC/Laptop where you connect the USB drive. It is recommended that you scan the USB drive with reliable antivirus software to detect viruses.

There can be various other reasons that may make your USB corrupt or unresponsive. But there are very slim chances that you will be able to recover a flash drive that has physical damage. However, you can try to run the check disk on the USB drive to fix the drive. We will be discussing this as you read on.

Recovery Methods for Corrupted Flash Drives

There are 3 tried and tested recovery methods. Try them and see which one works out for you.

1. Restoring Excel Files from Windows backup

To bring back your old Excel files, fixing up the corrupt file is your best option. Importantly note that this method would work only if your system’s Windows backup option has been enabled.

Step-by-step process for restoring your older Excel files:

• Connect your USB drive
• Go to “My Computer”->USB Drive->Check if the file exists
• Right click on the excel file and click on the restore previous versions

• You will now see a list of older versions which were created
• Select one the backups and click on “restore”

2. Using Command Line to Recover Excel Files

In case you are looking to repair Excel on flash drive, you can also resolve it by using the command line. Just follow the below steps to see if you can recover the excel files.

• Connect your USB Flash drive
• Open “Run” (press Windows+R) and then open “cmd”

• Type “attrib -h -r -s /s /d (USB Drive Letter):\*.*” where the (USB Drive Letter) is the drive letter you can find using “My Computer”
• Once this has been completed, Windows will start repairing your files
• After the process gets over, try accessing the excel file to see if the data has been recovered

3. Running a “Check Disk” on flash drives

Follow the below steps while the USB flash drive has been plugged into your computer:

• Open “Run” and then open “cmd”
• Type in “chkdsk /X /f (USB Drive Letter)” where the “(USB Drive Letter)” is the letter of the corrupted USB Drive. You can get this letter easily from the “My Computer”.

It will now check your disk to and correct any corrupted records.

What if none of these methods works?

In case none of the above methods works to repair Excel document on a flash drive, then you would need a professional Excel repair software such as Stellar Repair for Excel to restore your files. Such software not only help repair corrupted Excel files on flash drives but also help in recovering the data stored within them in their original format.

Stellar Repair for Excel resolves corruption problems in Excel files and recovers all formulas, charts, cell formatting, and more from them. It can repair multiple Excel files in one go. Equipped with a fully interactive GUI, working with this product is extremely easy.

To sum it up

Although flash drives are quite popularly used, they are not the most reliable of storage devices. These drives can fail anytime without warning. Thus, always back up your data on other more robust devices instead of flash drives. We hope that with the above tried and tested methods you will easily be able to repair Excel document on flash drive if need be. For any queries that you have, feel free to leave a comment below!

How to Fix “File Not Loaded Completely” Error in Excel?

Summary: You may get the “File not loaded completely” error when opening a large-sized Excel file. Read this post to understand the causes behind this issue and the troubleshooting solutions to fix this Excel error. Also, you’ll get to know about an Excel repair tool that can help fix the issue if the cause is corruption in the Excel file.

Several users have reported experiencing the “File not loaded completely” error while opening Excel spreadsheets or when importing CSV file into Excel. This error can occur if the worksheet has crossed the maximum rows and columns limit , i.e., 1048576 rows by 16,386 columns. However, this issue can also occur due to various other reasons. Let’s take a look at the possible causes behind this error.

Why this Error Occurs?

The “File not loaded completely” issue can occur due to one of the following reasons:

• The Excel file you are trying to open is corrupted.
• The Excel file is too large.
• The Excel file has crossed the rows limit.
• Memory issue in your system.

Methods to Resolve the “File not Loaded Completely” Error

Following are some methods you can try to fix the Excel file not loaded completely issue.

Method 1: Try to Import the Spreadsheet into MS Access

A large-sized Excel file takes time and memory to load. When you try opening a large file, you may get the “file not loaded completely” error. It indicates your file contains unwanted rows and columns. In such a case, you can try importing your spreadsheet into Access. By doing this, you can easily access the rows and columns in the database table, and then remove the extra rows. Follow the steps below to import your spreadsheet into Access:

• Open a blank database in Access application.
• Navigate to the External Data tab and then click on the Excel button.

• In the Get Data-Excel Spreadsheet window, click Browse.

• In the File Open dialog box, select the Excel file (in which you are getting the error) and click Open.

• Select Import the source data into a new table in the current database and click OK.

• In the Import Spreadsheet Wizard window, you’ll see all the rows and columns of your Excel file. Click Next.

• In the dialog box that appears, you can modify the field information (extra columns or rows).

• Once you performed the changes, click on the Next button.

• Provide a name to the table.

• Next, select the option “I would like a wizard to analyze my table after importing the data” (if you want to analyze the data) and click Finish.
• You will get a dialog box with a message. Click Yes.
  
• The Table Analyzer wizard will appear on the screen.

• Click on the Next button.

• Follow the instructions of the Table Analyzer wizard.
• Once you complete all the steps, select “Save import step” and click Close.

Method 2: Split Your Large Excel File

You may face the Excel file not loaded completely issue when importing a large Excel file. In such a case, you can try splitting your large file into smaller ones. To split the file, you can use VBA codes or the move or copy feature.

Method 3: Stop Unwanted Processes Running in the Background

Sometimes, you get the “File not loaded completely” error if you are running multiple files or programs simultaneously. You can check and stop unnecessary background processes in Windows using your system’s Task Manager. Here are the steps:

• Press the Ctrl+Shift+Esc keys to open the Task Manager window.

• Navigate to the Processes tab and check the Memory section.
• You can see the memory consumption of all the applications in your system.
• Select the unwanted applications and click on End Task.

Now, try to open the Excel file.

Method 4: Repair your Excel File

Sometimes, Excel throws the “File not loaded completely” error if it fails to read the data in your file. This might happen if your Excel file is corrupt. You can use the Open and Repair utility in Excel to repair your Excel file. Follow the below steps:

• In Excel, click the File tab and then click Open.
• Click Browse to select the desired file.
• In the Open dialog box, click on the corrupted file.
• Click on the arrow next to the Open button and then select Open and Repair.

•  Click on the Repair button.

• After repair, you will see a message as shown in the below figure.

• Click Close.

An Alternative Solution

If your file gets corrupted, then repairing it using the “Open and Repair” utility is a good option. However, the Open and Repair utility may not work if the file is severely damaged or corrupted. In such a case, you can use a professional Excel repair tool, such as Stellar Repair for Excel. This tool is primarily designed to repair inaccessible or corrupted Excel files. It can effectively work even if your file is too large or severely damaged. It can recover all the data from the corrupted Excel file without impacting its actual format. The software supports Excel files of almost all Excel versions.

Conclusion

The File not loaded completely issue in Excel may occur due to numerous reasons. Try the troubleshooting methods listed above to resolve the issue. If the Excel file is corrupt, then you can try repairing your file using the Open and Repair tool. However, it can fix only minor corruption issues. If your file is severely corrupted, then use Stellar Repair for Excel . The software offers you the safest way to repair your Excel file without making any changes in the formatting. You can download the free trial version of the software today to scan and preview the Excel file.

Also read: