5 Ways to Reset Lava Blaze 2 Pro Without Volume Buttons

Sometimes, there may be a necessity to reset an Android device to its factory settings. Whether you wish to sell your device to someone else or unlock your device, you will most likely have to do a hard reset. Most Android devices can be reset easily by pressing a combination of volume and power buttons. But to hard reset Android tablet without volume buttons is a different ball game altogether and perhaps a lot more cumbersome. We are here to break that myth for you!

If the Android device is working well, to hard reset Android tablet without using the volume buttons won’t be much of a problem and can be done within just a few taps. But if the Lava Blaze 2 Pro device is not functioning, it may pose a problem. That said, there are several methods to hard reset Android tablets without volume buttons. We have been able to list some of the easiest methods and describe them for you in the sections that follow. So read on to learn how to hard reset your Android device without volume buttons.

safe & secure

Part 1: Reset Android without volume buttons using Dr.Fone - Data Eraser (Android)

If you need to reset an Android device that doesn’t have functional volume buttons, Dr.Fone - Data Eraser (Android) can assist you in securely erasing all data and performing a reset. This software provides a reliable solution that doesn’t require volume buttons.

Before proceeding with the reset using Dr.Fone - Data Eraser (Android), carefully consider whether you still want to delete all data from your phone. Resetting will permanently erase all files, settings, and personal information on your device, and it cannot be undone. Therefore, it is important to back up any important data before performing the reset. If you are certain that you want to proceed with the reset using Dr.Fone, follow the steps below:

safe & secure

Step 1: Download Wondershare Dr.Fone on your computer. Open the “Data Eraser” tool and connect your android device to the computer.

Step 2: Click “Erase” to start erasing all data on the Android device. Think again about whether you want to delete all data and type “000000” to confirm.

Step 3: Wait for the erase process to end, and you can view the erasure report to check the data type erased after erasing completes.

safe & secure

Part 2: Reset Android without volume button in recovery mode (need home button)

Resetting an Android smartphone or a tablet is not very hard, especially, if there is a home button on your device. A combination of few button presses including the home button will be the first step to the factory data resetting process. But if there are no physical volume buttons, the process may be quite different from the normal tablets. Only after booting your Android tablet into recovery mode, you will be able to hard reset Android tablet without volume buttons. To know how to reset an Android tablet without volume buttons, follow the steps described below. Remember that this method would only work if your Android device has a home button.

Step 1: Press Power off + home button.

Press the power button until the options for Power off, Restart, and others appear. Now, tap on the “Power off” option and hold on to it while pressing the home button of your android device at the same time.

Step 2: Confirm boot into safe mode.

Now, the screen for rebooting into safe mode will appear. Tap on “Yes” to enter the safe mode.

Step 3: Enter recovery mode.

Press and hold the power button as well as the home button of your device simultaneously until a new screen appears. After it appears, release the two buttons and press the power button one more time. Now, press and hold down the home button. With that, you will enter into recovery mode and a new set of options will appear on the screen.

Step 4: Navigate and do Factory Reset.

Using the home button to navigate, move down to the “Wipe data/factory reset” option. Press the power button to select the option.

Wipe data/factory reset

You may have to confirm your choice by selecting “Yes”.

Step 5: Reboot your device.

After the reset is complete, navigate to the “reboot system now” option and select it to reboot your device. At the end of this process, your device will be reset.

Part 3: Reset Android with the reset pinhole

There are many reasons for opting to reset an Android smartphone or tablet. Sometimes, a forgotten password might get your tablet locked. At times, the screen of your smartphone or tablet might get stuck and fail to respond. Or your device might come with a non-removable battery to make matters worse. For all these problems and many others, you might want to reset your device. But if your device does not come with a home button or volume buttons, you might want to use a different method. Generally, such devices come with a reset pinhole on the Lava Blaze 2 Pro device which can be used to reset the Lava Blaze 2 Pro device. To perform a tablet hard reset without the volume button, follow the simple steps described below.

Step 1: Find the Reset pinhole.

Look for a very small opening on the back panel or the bezels of a smartphone. Usually, such pinholes are marked “Reset” or “Reboot” and are available on the top left side of the back panel. But be careful not to mistake it with the microphone as using it for resetting your gadget may damage the small microphone permanently and lead to other complications.

Step 2: Insert a pin into the hole.

After locating it, insert a stretched paperclip or a small pin into the hole and press it for a few seconds.

Now all the data in your Android device will be reset. After this, you can continue to use your device normally without any problem.

Part 4: Reset Android from Settings (phone works normally)

If your Android tablet or smartphone is functioning normally, your device can be reset to the factory settings using just your device itself. Even if your device does not have a home button or volume control buttons, this method will be applicable and can be used to reset the Lava Blaze 2 Pro device. But before using this method to reset your Android device, make sure to back up all the necessary information that you have on your device. You can also sync all the important files to the cloud using your Google account. Also, it is necessary to keep in mind that this procedure will remove all the accounts into which your device is signed in. To know how to reset an Android tablet without volume button, read on.

Step 1: Open the Settings app.

Tap on the Settings app in the app section of your device to open it.

Step 2: Select the Data Reset folder.

After that, navigate or scroll down until you can find the “Backup and Reset” option. Tap on it to open the folder.

Step 3: Tap on Factory data reset.

Now swipe down to find the “Factory data reset” option and tap on it. A new screen will appear, requesting you for confirmation to proceed with the process. Tap on “Reset device” to start the process.

At the end of the process, your device will be reset and ready to use after it completes the mandatory reboot.

Part 5: Reset Android tablet to unlock Android using Dr.Fone - Screen Unlock (Android)

If you are facing the challenge of resetting an Android tablet to unlock the lock screen, the easiest way is to use a dedicated tool. Dr.Fone - Screen Unlock (Android) is recommended in this case. It is a helpful software that provides a solution to bypass screen lock and perform a reset on your Android tablet.

Dr.Fone - Screen Unlock (Android)

The Best Tool to Reset Android and Solve Your Screen Locks

Reset Android tablets or phones when the Lava Blaze 2 Pro device is locked or without a volume button.
Bypass the FRP lock of Lava Blaze 2 Pro without a PIN or Google account.
Support most mainstream Android models like Lava Blaze 2 Pro, Lava Blaze 2 Pro, Xiaomi, etc.
Everyone can handle the lock screen without any tech knowledge.

3,724,689 people have downloaded it

Here are the steps about how to reset Android to unlock lock screen.

Step 1: Launch Dr.Fone - Screen Unlock (Android) and connect your Android device.

First, install and launch Wondershare Dr.Fone on your computer. Select the “Screen Unlock” option from the main interface and then click “Android” > “Unlock Android Screen”. Using a USB cable, connect your Android tablet to the computer.

Step 2: Select your device brand and follow the guide to restart your device.

Dr.Fone will ask you to select your device brand and display the specific way to restart the Lava Blaze 2 Pro device. You need to select your device brand in this step because the unlock way of different device brands is different. And then follow the instructions to restart your device.

Step 3: The lock screen of your device is removed.

Wait for the reboot process to complete, and then you can access the phone or tablet without the password.

Conclusion

So these are the methods with which you can do a reset without using volume buttons. The difficulty level of the methods depends on the type and brand of the Android device. The first two parts can be performed easily by anyone, and that too in a matter of a few minutes. However, the third method may pose some difficulty, particularly because manufacturers set different key combinations for rebooting the Lava Blaze 2 Pro device into recovery. Nevertheless, once it is figured out, the rest is easy. Hence, it is up to you to decide on the method to be adopted for hard resetting your Android device.

safe & secure

4 Easy Ways for Your Lava Blaze 2 Pro Hard Reset

Lava Blaze 2 Pro is a popular smartphone brand that has a wide range of models. If you are a Lava Blaze 2 Pro user, you might have to hard reset your phone for various reasons. A hard reset is a process that erases all data and settings from your phone, and it is the last resort to fix any software-related issues. If you are looking for ways to hard reset your Lava Blaze 2 Pro phone, you are in the right place. In this guide, we will discuss four easy ways to hard reset your Lava Blaze 2 Pro phone.

If your Lava Blaze 2 Pro phone is very slow or hangs, and you cannot fix it even working with memory and other stuff, then you can solve this issue using Lava Blaze 2 Pro hard reset. This also works if you have forgotten your PIN or password or you want to bypass the screen lock. So, how to hard reset a Lava Blaze 2 Pro phone?

Part 1: 4 easy ways to hard reset your Lava Blaze 2 Pro

Hard reset Lava Blaze 2 Pro is an excellent solution for bypassing screen lock and recovering locked Lava Blaze 2 Pro phone. It is also an option to format your Lava Blaze 2 Pro phone if you are handing over or selling your phone and want to keep your data secure. So, what are the tools or techniques for Lava Blaze 2 Pro hard reset?

1. Google Find My Device (data loss)

Google Find My Device is your best bet if you want to reset your Lava Blaze 2 Pro phone hard remotely. So, here is the step-by-step guide for this method.

Launch Google Find My Device on your computer and sign in with your Google credentials.
You can choose three options, i.e., Play sound, Secure device, and Erase device.
Click the Erase Device link.
In the Erase all data menu, click the Erase option.

2. Gmail account

If you opt for a Lava Blaze 2 Pro hard reset because of screen lock or phone locking issues, then your other option is to use the Gmail account to unlock it. If you are wondering how to use a Gmail account for unlocking, here is the step-by-step guide.

Power On your Lava Blaze 2 Pro Android phone.
When you attempt your phone incorrectly multiple times, you will see the Forgot pattern option.
Click the Forgot pattern option.

Fill in your Google Account credentials to log in.
Now, unlock your device and choose a new password.

3. Answer security questions

Google security questions or your device company Security questions will help you to reset your phone password without data loss.

When you attempt a wrong password multiple times, you will see options for recovering passwords.
Click on the Forgot pattern option.

Click on the “Answer question”.
Answer the security questions correctly to unlock your phones and choose a new password or pattern lock.

4. Use Dr.Fone - Data Eraser

If the reason for hard resetting your phone is any issue with the deleting data of the phone, second-hand phone for sale, then your phone need to data erasing. Since it is a complicated technical procedure for a layman, we recommend using Dr.Fone - Data Eraser because of its ease of use and efficiency. You can erase all types of data using this software. Let us see how it works.

Connect Your Android Phone

Launch Dr.Fone on your computer. Select “Data Eraser” among all the tools to resolve the Lava Blaze 2 Pro hard reset.

Connect your Android phone to the computer using a USB cable. Make sure you have enabled USB debugging on your phone. If the Android os version is above 4.2.2, there will be a pop-up message on your phone asking you to allow USB debugging. Tap on “OK” to continue.

Start Erasing Your Android Phone

Then Dr.Fone will automatically recognize and connect your Android device. Click on the “Erase All Data” button to start erasing all your data.

Since all the erased data are not recoverable, make sure you have backed up all the needed data before you proceed. Then key in “000000” into the box to confirm your operation.

Type in “000000” to confirm and move on. Since you may lose your data in system repair and in case of a Lava Blaze 2 Pro hard reset, your phone’s memory is wiped, it is always important to keep a backup of your phone data. More on this in the next section.

Then Dr.Fone will start erasing all data on your Android phone. The whole process takes only a few minutes. Please don’t disconnect the phone or open any other phone management software on the computer.

Perform Factory Data Reset on Your Phone

After all app data, photos, and all other private data have been completely erased, Dr.Fone will ask you to tap on Factory Data Reset or Erase All Data on the phone. This will help you completely wipe all the settings on the phone.

Now your Android phone has been completely wiped and it’s like a brand new one.

safe & secure

Part 2: How to keep my data safe?

The best thing you can do to keep your data secure, even in case of unwanted crashes and accidents, is to periodically back up your phone and computer. So, you might ask what the best way to back up my phone is. We recommend Dr.Fone - Phone Backup because it is part of your phone’s comprehensive suite of solutions and works efficiently without any technical input from you.

The Bottom Line

In the current digital age, part of our life depends on our gadgets, so keeping them updated and tuned in is the best strategy to function without unwanted bumps. Obviously, it takes some pre-planning like periodic data backup, memory refresh, optimum charging, and so on. Dr.Fone is a comprehensive suite of applications that help you maintain your devices and fix them in case of an accident. This article discusses the Dr.Fone - Data Eraser for Lava Blaze 2 Pro hard reset.

How to Reset Lava Blaze 2 Pro without Losing Data

Nothing good lasts forever, not even your all-singing, all-dancing new Android smartphone. The warning signs are obvious, apps taking forever to load, constant force close notifications, and a battery life shorter than an episode of Westworld. If you recognize these symptoms then listen up, because your phone may be headed for a meltdown and there’s only one thing left to do. It’s time to reset your Android phone.

Before taking the plunge, there are a number of factors to consider. We’ve put together a quick guide to let you know what you need to know… and what you need to do. Before we start deleting stuff, however, it’s important to understand what a Factory reset is.

Part 1: What is Factory Reset?

There are two types of reset for every Android device, soft and hard resets. A soft reset is just a way to force the Android operating system to shut down in the event of a freeze and you only risk losing any data which wasn’t saved prior to the reset.

A hard reset, also known as a factory reset and a master reset, returns the Lava Blaze 2 Pro device to the condition it was in when it left the factory. Performing a factory reset will permanently delete any and all personal data you have on your device. This includes any personal settings, apps, pictures, documents, and music stored on your device. A factory reset is irreversible, which means before considering taking this step, it is a good idea to back your data and settings up. A factory reset is a great way to purge buggy updates and other malfunctioning software and can give your phone a new lease of life.

Signs You Need to Reset Phone

You’ll probably already know if your phone needs a reset, but if you’re unsure, look for some of the following signs. If you recognize any of the following symptoms then a factory reset is probably a good idea.

If your phone is running slowly and you’ve already tried deleting Apps and data, but it hasn’t resolved anything.
If your Apps are crashing or you keep getting ‘force close’ notifications from your operating system.
If your Apps are taking longer to load than usual, or your browser is running slow.
If you find your battery life is worse than usual and you need to charge your phone more often.
If you are selling, exchanging, or just giving your phone away. If you don’t reset it, the new user can gain access to cached passwords, personal details, and even your pictures and videos.

Remember factory resetting will erase everything on your device, so it’s essential that you back up anything you can’t afford to lose.

Part 2: Back Up Your Data Before Factory Reset

There are a number of Android data backup software for PC out there. Having a Google account will help you save your contacts and settings, but it won’t save your pictures, documents, or music. There are numerous cloud-based systems available like Dropbox and Onedrive where your data is saved onto a cloud-based server, but you’ll need a data connection or wi-fi to restore to your device and of course, you are trusting a third party with your data. We recommend Dr.Fone Basic . It’s easy to use and will save everything and best of all you know exactly where it is.

Dr.Fone - Phone Backup (Android) enables you to backup all your data, including contacts, messages, call history, calendar, video and audio files, etc. You can choose to individually back up data or everything directly to your computer and then restore it whenever you like.

Back up and restore data from your device to a computer with a single click. It’s a tried and tested program and compatible with over 8000+ devices. To use it, click the link, download it and follow these instructions.

Dr.Fone Basic

Backup & Restore Data Turns Flexible

One-click to back up the whole iOS and Android device to your computer.
Export what you want from the backup to your computer.
Your device’s data remains intact during the restore process.
Fully compatible with the latest iOS and Android version.

3,823,152 people have downloaded it

How to backup Android phone with Dr.Fone Basic

Step 1. Open Dr.Fone on your computer and connect your Android device. Go to My Backup > Back Up Now. Set the Dr.Fone Link app as your default SMS app on your Android device.

Step 2. Wait for the backup process to complete. A progress bar will show you how far along it is.

Step 3. Once the backup is done, it’ll show up in your window. To see the backup on your PC, click Open in Folder. If you want to see all backups, select View Backups.

Also, you can watch this video to learn more details.

safe & secure

Part 3: How to Factory Reset Android Phone

After your data is safely tucked away, it’s time to tackle the reset itself. There are a few different ways to reset your device and we’ll look at them all in turn.

You can factory data reset your Android device via the settings menu by following these steps.

Step 1. Open your phone, drag down the ‘Options’ menu and select the ‘Settings’ menu. Look for the little cog in the top right of your screen.

Step 2. Find the option for ‘Back up and Restore’ (please note - using Google to back up your account is a good idea, but it won’t save your music, documents, or pictures.)

Step 3. Press the button for ‘Factory Data Reset’ (please note - this is irreversible)

Step 4. If you have done this correctly a little Android robot will appear on your screen as the Lava Blaze 2 Pro device resets itself.

Method 2. Resetting Your Phone in Recovery Mode

If your phone is misbehaving it might be easier to reset it via Recovery Mode. To do this you must turn your device off first.

Step 1. Press and hold the Volume up button and the Power button at the same time. The phone will now boot in Recovery Mode.

Step 2. Use the Volume down button to choose Recovery Mode. To navigate use the Volume up button to move the arrow and the Volume down button to select.

Step 3. If done correctly. You’ll find an image of an Android robot alongside a red exclamation mark and the words ‘No command’.

Step 4. Hold down the Power button and press the Volume up button then release it.

Step 5. Using the volume buttons scroll to ‘wipe data/factory reset’ and then press the Power button.

Step 6. Scroll to ‘Yes - erase all user data’ and to complete the process press the Power button.

Please note: Devices running Android 5.1 or above, will still require you to enter your Google Password to complete this reset.

Method 3. Resetting Your Phone Remotely With Android Device Manager

You can also perform a factory reset by using the Android Device manager App. Obviously, you’ll need to have Android Device Manager installed on your phone for which you’ll need a Google Account.

Step 1. Sign in to the App and locate your device on whatever medium you are currently using. With Android Device Manager it is possible to Factory Reset a device remotely by using a PC or other device, but your phone must be logged into your Google account and have an active internet connection.

Step 2. Select erase all data. This is particularly effective if you have lost or had your phone stolen and your device is running Android 5.1 or higher as whoever has your phone will still need your Google Password to be able to reset the Phone.

Please note: this reset will also delete Android Device Manager and you will therefore be unable to locate or track your device.

Once you have successfully reset your Android device to its factory settings, all you need to do is restore your original data. After you’ve completed this step your device should be just like new.

Part 4: Restoring Your Phone After a Reset

It can be quick and scary seeing your phone return to its original state. But don’t panic. Your data is still safely tucked away on your computer. To restore your contacts and Apps just connect your Lava Blaze 2 Pro to the Internet and login into your Google account when prompted.

Once you have restarted your mobile, connect it to your PC and open Dr.Fone on your computer. Select Phone Backup, and click on the Restore button to start restoring the data to your phone.

Dr.Fone will display all the backup files. Select the backup file you would like to restore and click View.

Then you will be able to select what files you want to restore. You can click Restore to Device to restore them all to your phone or just select individual data to restore.

Once you’ve successfully completed your first reset, you’ll realize how simple the whole process is and the next time you need to perform one, you’ll be able to do it with your eyes closed.

safe & secure

Bonus Tip: Are You Preparing to Exchange Your Phone?

After factory resetting your Android Phone, your phone should work smoothly. But what should we do if your phone is still not working as before? The App still crashes or your phone is still running slow, which may be caused by an old operating system or the phone is too old. It is time to change to a new phone. In this case, you may want to switch the data from the old phone to the new phone. How do achieve that? Dr.Fone - Phone Transfer is here. It is a dedicated tool to transfer everything from one old device to the new one! You can transfer data without any hassle because of user-friendly instructions.

Click here

![style arrow up](https://drfone.wondershare.com/style/images/arrow_up.png)

Dr.Fone - Phone Transfer

Transfer Everything from Old Devices to New Devices in 1 Click!

Works directly and transfer data between two cross-operating system devices in real-time.
Works perfectly with Apple, Lava Blaze 2 Pro, HTC, LG, Sony, Google, HUAWEI, Motorola, ZTE, Lava Blaze 2 Pro, and more smartphones and tablets.
Fully compatible with major providers like AT&T, Verizon, Sprint, and T-Mobile.
Fully compatible with the latest iOS and Android.

3981454 people have downloaded it

Conclusion

Resetting your Android device can resolve performance issues and prepare it for resale or gifting. However, a factory reset erases all personal data, making it essential to back up your data before proceeding.

Tools like Dr.Fone Basic are recommended for this purpose. You can perform a factory reset using the settings menu, recovery mode, or Android Device Manager. Remember, a factory reset is irreversible, so take every precaution necessary to safeguard your important data.

Thank you for reading and if we’ve been of some help please take the time to bookmark our page.

Phone Solutions

5 Ways to Reset Lava Blaze 2 Pro Without Volume Buttons | Dr.fone