5 Ways to Reset Motorola Razr 40 Without Volume Buttons

Sometimes, there may be a necessity to reset an Android device to its factory settings. Whether you wish to sell your device to someone else or unlock your device, you will most likely have to do a hard reset. Most Android devices can be reset easily by pressing a combination of volume and power buttons. But to hard reset Android tablet without volume buttons is a different ball game altogether and perhaps a lot more cumbersome. We are here to break that myth for you!

If the Android device is working well, to hard reset Android tablet without using the volume buttons won’t be much of a problem and can be done within just a few taps. But if the Motorola Razr 40 device is not functioning, it may pose a problem. That said, there are several methods to hard reset Android tablets without volume buttons. We have been able to list some of the easiest methods and describe them for you in the sections that follow. So read on to learn how to hard reset your Android device without volume buttons.

safe & secure

Part 1: Reset Android without volume buttons using Dr.Fone - Data Eraser (Android)

If you need to reset an Android device that doesn’t have functional volume buttons, Dr.Fone - Data Eraser (Android) can assist you in securely erasing all data and performing a reset. This software provides a reliable solution that doesn’t require volume buttons.

Before proceeding with the reset using Dr.Fone - Data Eraser (Android), carefully consider whether you still want to delete all data from your phone. Resetting will permanently erase all files, settings, and personal information on your device, and it cannot be undone. Therefore, it is important to back up any important data before performing the reset. If you are certain that you want to proceed with the reset using Dr.Fone, follow the steps below:

safe & secure

• Step 1: Download Wondershare Dr.Fone on your computer. Open the “Data Eraser” tool and connect your android device to the computer.

• Step 2: Click “Erase” to start erasing all data on the Android device. Think again about whether you want to delete all data and type “000000” to confirm.

• Step 3: Wait for the erase process to end, and you can view the erasure report to check the data type erased after erasing completes.

safe & secure

Part 2: Reset Android without volume button in recovery mode (need home button)

Resetting an Android smartphone or a tablet is not very hard, especially, if there is a home button on your device. A combination of few button presses including the home button will be the first step to the factory data resetting process. But if there are no physical volume buttons, the process may be quite different from the normal tablets. Only after booting your Android tablet into recovery mode, you will be able to hard reset Android tablet without volume buttons. To know how to reset an Android tablet without volume buttons, follow the steps described below. Remember that this method would only work if your Android device has a home button.

• Step 1: Press Power off + home button.

Press the power button until the options for Power off, Restart, and others appear. Now, tap on the “Power off” option and hold on to it while pressing the home button of your android device at the same time.

• Step 2: Confirm boot into safe mode.

Now, the screen for rebooting into safe mode will appear. Tap on “Yes” to enter the safe mode.

• Step 3: Enter recovery mode.

Press and hold the power button as well as the home button of your device simultaneously until a new screen appears. After it appears, release the two buttons and press the power button one more time. Now, press and hold down the home button. With that, you will enter into recovery mode and a new set of options will appear on the screen.

• Step 4: Navigate and do Factory Reset.

Using the home button to navigate, move down to the “Wipe data/factory reset” option. Press the power button to select the option.

You may have to confirm your choice by selecting “Yes”.

• Step 5: Reboot your device.

After the reset is complete, navigate to the “reboot system now” option and select it to reboot your device. At the end of this process, your device will be reset.

Click here

## Part 3: Reset Android with the reset pinhole

There are many reasons for opting to reset an Android smartphone or tablet. Sometimes, a forgotten password might get your tablet locked. At times, the screen of your smartphone or tablet might get stuck and fail to respond. Or your device might come with a non-removable battery to make matters worse. For all these problems and many others, you might want to reset your device. But if your device does not come with a home button or volume buttons, you might want to use a different method. Generally, such devices come with a reset pinhole on the Motorola Razr 40 device which can be used to reset the Motorola Razr 40 device. To perform a tablet hard reset without the volume button, follow the simple steps described below.

• Step 1: Find the Reset pinhole.

Look for a very small opening on the back panel or the bezels of a smartphone. Usually, such pinholes are marked “Reset” or “Reboot” and are available on the top left side of the back panel. But be careful not to mistake it with the microphone as using it for resetting your gadget may damage the small microphone permanently and lead to other complications.

• Step 2: Insert a pin into the hole.

After locating it, insert a stretched paperclip or a small pin into the hole and press it for a few seconds.

Now all the data in your Android device will be reset. After this, you can continue to use your device normally without any problem.

Part 4: Reset Android from Settings (phone works normally)

If your Android tablet or smartphone is functioning normally, your device can be reset to the factory settings using just your device itself. Even if your device does not have a home button or volume control buttons, this method will be applicable and can be used to reset the Motorola Razr 40 device. But before using this method to reset your Android device, make sure to back up all the necessary information that you have on your device. You can also sync all the important files to the cloud using your Google account. Also, it is necessary to keep in mind that this procedure will remove all the accounts into which your device is signed in. To know how to reset an Android tablet without volume button, read on.

• Step 1: Open the Settings app.

Tap on the Settings app in the app section of your device to open it.

• Step 2: Select the Data Reset folder.

After that, navigate or scroll down until you can find the “Backup and Reset” option. Tap on it to open the folder.

• Step 3: Tap on Factory data reset.

Now swipe down to find the “Factory data reset” option and tap on it. A new screen will appear, requesting you for confirmation to proceed with the process. Tap on “Reset device” to start the process.

At the end of the process, your device will be reset and ready to use after it completes the mandatory reboot.

Part 5: Reset Android tablet to unlock Android using Dr.Fone - Screen Unlock (Android)

If you are facing the challenge of resetting an Android tablet to unlock the lock screen, the easiest way is to use a dedicated tool. Dr.Fone - Screen Unlock (Android) is recommended in this case. It is a helpful software that provides a solution to bypass screen lock and perform a reset on your Android tablet.

Dr.Fone - Screen Unlock (Android)

The Best Tool to Reset Android and Solve Your Screen Locks

• Reset Android tablets or phones when the Motorola Razr 40 device is locked or without a volume button.
• Bypass the FRP lock of Motorola Razr 40 without a PIN or Google account.
• Support most mainstream Android models like Motorola Razr 40, Motorola Razr 40, Xiaomi, etc.
• Everyone can handle the lock screen without any tech knowledge.

3,724,689 people have downloaded it

Here are the steps about how to reset Android to unlock lock screen.

• Step 1: Launch Dr.Fone - Screen Unlock (Android) and connect your Android device.

First, install and launch Wondershare Dr.Fone on your computer. Select the “Screen Unlock” option from the main interface and then click “Android” > “Unlock Android Screen”. Using a USB cable, connect your Android tablet to the computer.

• Step 2: Select your device brand and follow the guide to restart your device.

Dr.Fone will ask you to select your device brand and display the specific way to restart the Motorola Razr 40 device. You need to select your device brand in this step because the unlock way of different device brands is different. And then follow the instructions to restart your device.

• Step 3: The lock screen of your device is removed.

Wait for the reboot process to complete, and then you can access the phone or tablet without the password.

Conclusion

So these are the methods with which you can do a reset without using volume buttons. The difficulty level of the methods depends on the type and brand of the Android device. The first two parts can be performed easily by anyone, and that too in a matter of a few minutes. However, the third method may pose some difficulty, particularly because manufacturers set different key combinations for rebooting the Motorola Razr 40 device into recovery. Nevertheless, once it is figured out, the rest is easy. Hence, it is up to you to decide on the method to be adopted for hard resetting your Android device.

safe & secure

Is your Motorola Razr 40 working too slow? Here’s how you can hard reset it

If Motorola Razr 40 3.4 hard reset or Motorola Razr 40 hard reset is the only option for your mobile phone, you can perform a factory reset to make your device function as it did on the first day. You may need a hard reset if it works slowly, hangs, you want to bypass screen lock, your memory is full, and you want to erase everything, you want to sell or give your device away, and you don’t want anyone to be able to access your files or passwords.

The following instructions will show you how to completely wipe up all of your data and restore the Motorola Razr 40 to its factory-fresh condition.

Part 1: Why do I Need to Hard Reset My Motorola Razr 40?

We advise you to remove all accounts from the Motorola Razr 40 device before performing a factory reset, especially if you plan to sell, give away, or donate the 3.4. It is also a good idea to unlink the Google account. By doing this, we can prevent issues for new users as some more recent smartphones have a feature called FRP, or Factory Reset Protection, which requires the Google account or PIN number that was originally used to set up the Motorola Razr 40 when a device is factory restored.

Part 2: How to Hard Reset My Motorola Razr 40

1. Fastboot Mode

• Shut down your phone.
• Add a USB cord to your computer or laptop.
• Your phone should now start up in Fastboot Mode after you press and hold the Volume Down + Power buttons for a few seconds. Motorola Razr 40 Recovery Mode and Fastboot Mode
• Using the ADB command, start Motorola Razr 40 in Bootloader Mode or Fastboot Mode.
• If your computer has ADB and Fastboot drivers installed, and your phone has USB debugging turned on, execute the command below after connecting it.
• Launch Command Prompt (CMD) on your PC, then type the command listed below.

reboot bootloader using adb

• After some time, you will see that your Motorola Razr 40 has been hard reset.

2. Hard reset with hardware key button

• Choose “wipe data/factory reset” on your Motorola Razr 40 to do a hard reset. Scroll down with the Volume buttons, and press the Power key to agree.
• Next, choose yes from the menu if further confirmation is required, and then click the Power button once.
• Lastly, press the Power key and choose the Reboot system.
• Do not forget to charge your phone.
• Initially, turn off your phone.
• Now Press the Volume Up + Power key for a few seconds to enter recovery mode.
• Press and hold the Power and Volume Up buttons at the same time until the Motorola Razr 40 device vibrates. Release all the presses if the Motorola Razr 40 logo or Recovery screen shows.
• You can give your phone up to 30 seconds to display the recovery screen.

Bonus Tips

Dr.Fone - Data Eraser

Dr.Fone - Data Eraser helps you quickly get rid of all the unwanted information and all of your data however it is always advisable to back it up using the Dr.Fone - Phone Backup.

Let’s see how you can delete completely all the data using Dr.Fone - Data Eraser. do not worry the next section is about how you can back up and restore the data before erasing it completely using Dr.Fone - Phone Backup.

Step 1: Connect your Motorola Razr 40 smartphone to your computer. Start Dr.Fone on your computer. Select “Data Eraser” from the tool list.

Connect your Motorola Razr 40 to the PC via a USB wire. Ensure that your phone has USB debugging turned on. You will see a pop-up window on your phone asking you to approve USB debugging.

Step 2: Begin wiping your Motorola Razr 40 phone.

Dr.Fone will then automatically recognize and connect to your Motorola Razr 40 smartphone. To begin wiping all of your data, select “Erase All Data.”.

Before proceeding, ensure that you have backed up any critical data because deleted data cannot be retrieved. After that, type “000000” to confirm your activity.

Dr. Fone will next proceed to wipe the data on your Motorola Razr 40 phone. The entire procedure takes only a few minutes. Turn off the phone and do not run any phone administration programs on the PC.

Step 3: Reset your phone’s factory data.

Once all app data, photos, and other private data have been completely erased, Dr.Fone will advise you to touch on Factory Data Reset or Erase All Data on the phone. You may use this to completely delete the phone’s settings.

Your Motorola Razr 40 phone has now been completely wiped, giving it the appearance of being brand new.

safe & secure

Dr.Fone - Phone Backup

Step 1: Connect your Motorola Razr 40 phone to your PC.

Launch Dr.Fone on your PC and choose “Phone Backup” from the list of options.

Then, connect your Motorola Razr 40 phone to the computer using a USB cord. Please ensure that the phone is in USB debugging mode. If your Motorola Razr 40 version is 4.2.2 or higher, a pop-up window on the Motorola Razr 40 phone will prompt you to accept USB Debugging. Please press the OK button.

To begin backing up the data on your Motorola Razr 40 phone, click Backup.

If you have previously used this application to back up your device, you may examine your backup history by clicking on “View backup history.”

Step 2: Choose which file types to back up.

After connecting the Motorola Razr 40 phone, pick the file types you wish to back up. Dr.Fone has already tested all of the file kinds for you. Then, to begin the backup process, click Backup.

The backup will take a few moments. Please do not detach your Motorola Razr 40 phone, use it, or erase any data from it during the backup process.

When the backup is finished, you can view the contents of the backup file by clicking the View the backup button.

safe & secure

The Bottom Line

Now that you know how to hard reset Motorola Razr 40 it is time to implement all the possible ways and see which one works for you. We also recommend you to proceed with backing up and restoration of all the information so that you will not have to repent in the end. It is all about using smart tools like Dr.Fone - Data Eraser and Dr.Fone - Phone Backup.

All Things You Need to Know about Wipe Data/Factoy Reset For Motorola Razr 40

Wiping data or carrying out a factory reset on an Android device is an effective solution for various issues on your Android phone. Even if you are contemplating selling your phone and you need all your device data to be wiped out, you carry out a factory reset. But, before you proceed, what’s important is to understand about wipe data/ factory reset, because, if you don’t, you might end up losing all your important data before it is backed up, serving no purpose. So, before you wipe data/ factory reset Android, here’s what you should know about it.

Part 1: What data will be wiped by Wipe Data/Factory Reset?

Doing a factory reset on the Android device will remove all the applications installed on the Motorola Razr 40 device along with the data associated with them. This brings back all the default settings of the Motorola Razr 40 device as it was when the phone was new, giving you a clean slate to start all over again.

Since Wipe data/factory reset deletes all applications, app data, and information (documents, videos, images, music, etc) stored in the internal space, it is required for you to perform a data backup operation before you reset the Android device to factory settings. However, wipe data/factory reset does not affect the SD card in any way. So, even if you have the SD card inserted with videos, images, documents, and any other personal information in the Android device while carrying out a factory reset, everything will remain safe and intact.

Part 2: How to perform Wipe Data/ Factory Reset?

Performing wipe data/factory reset on your Android device e is very simple. It is a matter of time before you wipe out everything lying on the internal storage of your Android device. Here’s how you can perform Wipe data/ Factory Rest on your device:

Step 1: First of all, turn off the Motorola Razr 40 device. Then, use the volume up button, volume down button, and Power button on your Android device simultaneously and hold on to the buttons until the phone turns on.

Step 2: Release the buttons when the Motorola Razr 40 device is powered on. Now, use the volume up and down button to sift through the options given on the screen. Use the power button to select “Recovery Mode” on the screen. Your phone will restart into “Recovery Mode’ and you will find the below screen:

Step 3: Holding the power button down, use the volume up button, and the Android system recovery menu will pop up.

Now, scroll down to “wipe data/factory reset” option from the list of commands and use the Power button to select it.

Now, scroll down to “Yes – delete all user data” using the volume button and then push the power button to select.

In some time your device will be reset into factory settings with all your data erased. The entire process will take a few minutes. Ensure that you have the phone at least 70% charged so that it does not run out of charge midway.

Part 3: Does Wipe Data/ Factory Reset wipe all your data?

There are various instances where you would require performing a wipe/factory reset on your device. It might be because of some glitch that you would like to troubleshoot on your Android device. Wiping data from the phone is a universal solution in such cases. Even in cases where you want to sell your device, performing a factory reset seems the best option. What’s important is to make sure you don’t leave a trace of your personal information on the Motorola Razr 40 device. Therefore, wipe data/factory reset is never the ultimate solution to rely on. It is neither the best option anyway.

Contrary to conventional thought of relying on wipe data/factory reset Android believing it to be the best solution for wiping out complete data from the phone, all research outcomes have proved something different. It is easier to recover account tokens used to authenticate you when you enter a password for the first time, from service providers like Facebook, WhatsApp, and Google. Hence it is easier to restore the user’s credentials as well.

So, to protect your privacy and completely wipe data off the Motorola Razr 40 device, you can use Dr.Fone - Data Eraser. This is an amazing tool that erases everything on the Motorola Razr 40 device without leaving an ounce of data in it. Here’s how you can use Dr.Fone - Data Eraser to completely wipe the data and protect privacy:

Dr.Fone - Data Eraser

Fully Erase Everything on Android and Protect Your Privacy

• Simple, click-through process.
• Wipe your Android completely and permanently.
• Erase photos, contacts, messages, call logs, and all private data.
• Supports all Android devices available in the market.

4,683,556 people have downloaded it

Step 1: Install and launch Dr.Fone - Data Eraser

First of all, install Dr.Fone on your computer and launch it by double-clicking on the icon. You will find the below window. You will find various toolkits on the interface. Select Erase from various toolkits.

Step 2: Initiate the Process

When the tool’s window opens, click Start to trigger the operation.

Click here


Step 3: Confirm and Execute Data Eraser

To remove all data, confirm with the given code. After inputting the code, select Erase Now. A message will appear upon erasure completion. Click Erasure Report to review the types of data erased.

This will protect your privacy as your Android device will reboot into default settings with all the data erased.

Since the erased data cannot be recovered, it is highly recommended to have all the personal data backed up before operating here using Dr.Fone.

And you could watch this YouTube video for an in-depth tutorial.

Try It Free Try It Free

safe & secure

Conclusion

Hence, today we learned about wiping data and also factory reset. Well as per us, using Dr.Fone - Data Eraser is the best option as it is a simple and click-through process and helps you completely erase data from your Android. This toolkit also is the best as it supports all Android devices available in the market today.

Try It Free Try It Free

safe & secure