5 Ways to Reset Tecno Spark 20 Pro+ Without Volume Buttons | Dr.fone

5 Ways to Reset Tecno Spark 20 Pro+ Without Volume Buttons | Dr.fone

Nova Lv13

5 Ways to Reset Tecno Spark 20 Pro+ Without Volume Buttons

Sometimes, there may be a necessity to reset an Android device to its factory settings. Whether you wish to sell your device to someone else or unlock your device, you will most likely have to do a hard reset. Most Android devices can be reset easily by pressing a combination of volume and power buttons. But to hard reset Android tablet without volume buttons is a different ball game altogether and perhaps a lot more cumbersome. We are here to break that myth for you!

If the Android device is working well, to hard reset Android tablet without using the volume buttons won’t be much of a problem and can be done within just a few taps. But if the Tecno Spark 20 Pro+ device is not functioning, it may pose a problem. That said, there are several methods to hard reset Android tablets without volume buttons. We have been able to list some of the easiest methods and describe them for you in the sections that follow. So read on to learn how to hard reset your Android device without volume buttons.

safe Download safe & secure

BLUETTI NEW LAUNCH AC180T

Part 1: Reset Android without volume buttons using Dr.Fone - Data Eraser (Android)

If you need to reset an Android device that doesn’t have functional volume buttons, Dr.Fone - Data Eraser (Android) can assist you in securely erasing all data and performing a reset. This software provides a reliable solution that doesn’t require volume buttons.

Before proceeding with the reset using Dr.Fone - Data Eraser (Android), carefully consider whether you still want to delete all data from your phone. Resetting will permanently erase all files, settings, and personal information on your device, and it cannot be undone. Therefore, it is important to back up any important data before performing the reset. If you are certain that you want to proceed with the reset using Dr.Fone, follow the steps below:

safe Download safe & secure

![choose data eraser](https://images.wondershare.com/drfone/guide/drfone-home.png)
  • Step 2: Click “Erase” to start erasing all data on the Android device. Think again about whether you want to delete all data and type “000000” to confirm.

start data earser

  • Step 3: Wait for the erase process to end, and you can view the erasure report to check the data type erased after erasing completes.

data eraser completes

data eraser completes

safe Download safe & secure

Part 2: Reset Android without volume button in recovery mode (need home button)

Resetting an Android smartphone or a tablet is not very hard, especially, if there is a home button on your device. A combination of few button presses including the home button will be the first step to the factory data resetting process. But if there are no physical volume buttons, the process may be quite different from the normal tablets. Only after booting your Android tablet into recovery mode, you will be able to hard reset Android tablet without volume buttons. To know how to reset an Android tablet without volume buttons, follow the steps described below. Remember that this method would only work if your Android device has a home button.

  • Step 1: Press Power off + home button.

Press the power button until the options for Power off, Restart, and others appear. Now, tap on the “Power off” option and hold on to it while pressing the home button of your android device at the same time.

  • Step 2: Confirm boot into safe mode.

Now, the screen for rebooting into safe mode will appear. Tap on “Yes” to enter the safe mode.

  • Step 3: Enter recovery mode.

Press and hold the power button as well as the home button of your device simultaneously until a new screen appears. After it appears, release the two buttons and press the power button one more time. Now, press and hold down the home button. With that, you will enter into recovery mode and a new set of options will appear on the screen.

  • Step 4: Navigate and do Factory Reset.

Using the home button to navigate, move down to the “Wipe data/factory reset” option. Press the power button to select the option.

Wipe data/factory reset

You may have to confirm your choice by selecting “Yes”.

select yes

  • Step 5: Reboot your device.

After the reset is complete, navigate to the “reboot system now” option and select it to reboot your device. At the end of this process, your device will be reset.

reboot system now

Part 3: Reset Android with the reset pinhole

There are many reasons for opting to reset an Android smartphone or tablet. Sometimes, a forgotten password might get your tablet locked. At times, the screen of your smartphone or tablet might get stuck and fail to respond. Or your device might come with a non-removable battery to make matters worse. For all these problems and many others, you might want to reset your device. But if your device does not come with a home button or volume buttons, you might want to use a different method. Generally, such devices come with a reset pinhole on the Tecno Spark 20 Pro+ device which can be used to reset the Tecno Spark 20 Pro+ device. To perform a tablet hard reset without the volume button, follow the simple steps described below.

choose yes

  • Step 1: Find the Reset pinhole.

Look for a very small opening on the back panel or the bezels of a smartphone. Usually, such pinholes are marked “Reset” or “Reboot” and are available on the top left side of the back panel. But be careful not to mistake it with the microphone as using it for resetting your gadget may damage the small microphone permanently and lead to other complications.

  • Step 2: Insert a pin into the hole.

After locating it, insert a stretched paperclip or a small pin into the hole and press it for a few seconds.

Now all the data in your Android device will be reset. After this, you can continue to use your device normally without any problem.

Part 4: Reset Android from Settings (phone works normally)

If your Android tablet or smartphone is functioning normally, your device can be reset to the factory settings using just your device itself. Even if your device does not have a home button or volume control buttons, this method will be applicable and can be used to reset the Tecno Spark 20 Pro+ device. But before using this method to reset your Android device, make sure to back up all the necessary information that you have on your device. You can also sync all the important files to the cloud using your Google account. Also, it is necessary to keep in mind that this procedure will remove all the accounts into which your device is signed in. To know how to reset an Android tablet without volume button, read on.

  • Step 1: Open the Settings app.

Tap on the Settings app in the app section of your device to open it.

  • Step 2: Select the Data Reset folder.

After that, navigate or scroll down until you can find the “Backup and Reset” option. Tap on it to open the folder.

select the data reset folder

  • Step 3: Tap on Factory data reset.

Now swipe down to find the “Factory data reset” option and tap on it. A new screen will appear, requesting you for confirmation to proceed with the process. Tap on “Reset device” to start the process.

backup reset

At the end of the process, your device will be reset and ready to use after it completes the mandatory reboot.

Part 5: Reset Android tablet to unlock Android using Dr.Fone - Screen Unlock (Android)

If you are facing the challenge of resetting an Android tablet to unlock the lock screen, the easiest way is to use a dedicated tool. Dr.Fone - Screen Unlock (Android) is recommended in this case. It is a helpful software that provides a solution to bypass screen lock and perform a reset on your Android tablet.

arrow

Dr.Fone - Screen Unlock (Android)

The Best Tool to Reset Android and Solve Your Screen Locks

  • Reset Android tablets or phones when the Tecno Spark 20 Pro+ device is locked or without a volume button.
  • Bypass the FRP lock of Tecno Spark 20 Pro+ without a PIN or Google account.
  • Support most mainstream Android models like Tecno Spark 20 Pro+, Tecno Spark 20 Pro+, Xiaomi, etc.
  • Everyone can handle the lock screen without any tech knowledge.

3,724,689 people have downloaded it

Here are the steps about how to reset Android to unlock lock screen.

  • Step 1: Launch Dr.Fone - Screen Unlock (Android) and connect your Android device.

First, install and launch Wondershare Dr.Fone on your computer. Select the “Screen Unlock” option from the main interface and then click “Android” > “Unlock Android Screen”. Using a USB cable, connect your Android tablet to the computer.

choose screen unlock

  • Step 2: Select your device brand and follow the guide to restart your device.

Dr.Fone will ask you to select your device brand and display the specific way to restart the Tecno Spark 20 Pro+ device. You need to select your device brand in this step because the unlock way of different device brands is different. And then follow the instructions to restart your device.

choose device

  • Step 3: The lock screen of your device is removed.

Wait for the reboot process to complete, and then you can access the phone or tablet without the password.

screen unlock successfully

Conclusion

So these are the methods with which you can do a reset without using volume buttons. The difficulty level of the methods depends on the type and brand of the Android device. The first two parts can be performed easily by anyone, and that too in a matter of a few minutes. However, the third method may pose some difficulty, particularly because manufacturers set different key combinations for rebooting the Tecno Spark 20 Pro+ device into recovery. Nevertheless, once it is figured out, the rest is easy. Hence, it is up to you to decide on the method to be adopted for hard resetting your Android device.

safe Download safe & secure

How do I reset my Tecno Spark 20 Pro+ Phone without technical knowledge?

Resetting a Tecno Spark 20 Pro+ smartphone to factory settings could be necessary. You will probably need to do a hard reset if you want to unlock your smartphone or sell it to someone else. The majority of Tecno Spark 20 Pro+ devices may be quickly reset simply by pushing the volume and power buttons together. However, hard resetting a Tecno Spark 20 Pro+ sometimes is a whole other situation and may be much more difficult. That myth will be dispelled for you by us!

If the Tecno Spark 20 Pro+ device is functioning properly, hard resetting a Tecno Spark 20 Pro+ tablet without volume buttons won’t be too difficult and can be completed in a matter of taps. However, if the apparatus is broken, it may be an issue. Let’s have a look at all the possibilities.

Part 1: 4 Easy solutions to hard reset your Tecno Spark 20 Pro+

1. From recovery mode to delete all data

It’s not particularly difficult to reset a Tecno Spark 20 Pro+ smartphone or tablet, especially if it has a home button. You can only do a hard reset on a Tecno Spark 20 Pro+ tablet without volume buttons after entering recovery mode. Follow the procedures outlined below to learn how to reset a Tecno Spark 20 Pro+ tablet without volume buttons.

Step 1: First, press the power off and home buttons.

Press the power button repeatedly until the Power off, Restart, and other choices are shown. Now, choose “Power Off” and hold it down while tapping your phone’s home button.

At the same time, the Tecno Spark 20 Pro+ device.

Step 2: Verify the safe mode bootup.

The screen for restarting in safe mode will now show up. To switch to safe mode, select “Yes.”

Step 3: Switch to recovery mode

Your device’s power and home buttons must be pressed and held simultaneously until a new screen shows. Release the two buttons once it appears, then press the power button one more. Press and hold the home button for a moment. With that, recovery mode will start, and a new set of choices will show up on the screen.

Step 4: Select “Factory Reset” and navigate

Navigate down to the “Wipe data/factory reset” option using the home button. To choose the choice, press the power button.

2. Use the factory reset code to wipe data in Tecno Spark 20 Pro+

Step 1: Press the Volume Up + Power Keys at the same time as turning off your smartphone and removing the SIM card.

Step 2: The Tecno Spark 20 Pro+ logo will appear when the phone boots. Keep none of the keys.

Step 3: Scroll down to the Wipe Data / Factory Reset option using the volume down key.

Step 4: If you want to say “OK” and reset, press the Power Key.

To delete all user data, click “Yes.”

Step 5: The factory data reset process will begin on the phone.

After formatting is finished, click “Reboot System Now.”

3. Google Find My Device

Finding My Device:

Go to www.google.com/android/find on your computer’s web browser and sign in with the same Google Account you used on your phone.

When your phone is located, Find My Device will provide specific location information.

Do any of the following:

  • If you’ve merely lost your phone, click Play sound to make it ring.
  • If you’re using Find My Device for the first time, select Set up secure & erase to configure remote locking and erasing for your phone.
  • To lock your phone and log out of your Google Account, click Secure device.
  • If you wish to completely delete everything on your phone, choose Erase device.

The removal of all data from your phone’s storage, including applications, app data, and settings, will result from remotely wiping it. Personal information is one type of data that might not be completely removed. After doing this, you won’t be able to access your phone remotely.

4. Dr.Fone - Data Eraser

Step 1: Connect your Tecno Spark 20 Pro+ phone to the desktop. Get Dr.Fone running on your PC. Choose “Data Eraser” from the list of tools.

drfone home page

Utilize a USB cord to link your Tecno Spark 20 Pro+ phone to the PC. Make sure USB debugging is enabled on your phone. On your phone, there will be a pop-up window requesting you to authorize USB debugging if the Tecno Spark 20 Pro+ OS version is higher than 4.2.2. Click “OK” to move forward.

connect to device

Step 2: Start erasing your Tecno Spark 20 Pro+ phone

Your Tecno Spark 20 Pro+ smartphone will then be immediately detected and connected by Dr.Fone. To begin wiping all of your data, click the “Erase All Data” option.

start erase

Make sure you have all the necessary data backed up before continuing because all wiped data cannot be recovered. After that, enter “000000” to verify your action.

code to erase

The data on your Tecno Spark 20 Pro+ phone will then begin to be deleted by Dr. Fone. The entire process only requires a few minutes. Do not turn off the phone or launch any other phone management programs on the PC.

erasing data

Step 3. Reset the factory data on your phone.

Dr.Fone will prompt you to tap on Factory Data Reset or Erase All Data on the phone once all app data, photographs, and other private data have been entirely removed. You may use this to entirely erase all of the phone’s settings.

www.sentrypc.com

erase successfully

safe Download safe & secure

Part 2: FAQs

1. Is there any simple tool to have my Tecno Spark 20 Pro+ backup? (Dr.Fone - Phone Backup)

Yes, there are very few simple tools available that you can use to back up your Tecno Spark 20 Pro+ phone. One such tool is Dr.Fone - Phone backup which is super simple to use and extremely beginner friendly and how you recover all of your lost data from your Tecno Spark 20 Pro+ phone.

2. Do these solutions damage my Tecno Spark 20 Pro+?

Unfortunately, many of the solutions that you used to recover or back up your Tecno Spark 20 Pro+ phone damage the quality of the information and also the hardware or software of your Tecno Spark 20 Pro+ mobile however the best solution to this problem is using Dr.Fone - Phone backup which is a supplied tool which does not cause any problem during or after its usage and help you recover all kind of lost data.

The Bottom Line

Now that you know how to reset a Tecno Spark 20 Pro+ phone that is locked and how to use Tecno Spark 20 Pro+ hard reset code to reset Tecno Spark 20 Pro+, it is time to implement resolution though you can try, and among the ways given above, the best solution is to go with the Wondershare Dr.Fone - Phone Backup. It is a great tool that will immediately help you recover all of your lost information from your Tecno Spark 20 Pro+ phone without causing any harm to your device.

safe Download safe & secure

Is your Tecno Spark 20 Pro+ working too slow? Here’s how you can hard reset it

If Tecno Spark 20 Pro+ 3.4 hard reset or Tecno Spark 20 Pro+ hard reset is the only option for your mobile phone, you can perform a factory reset to make your device function as it did on the first day. You may need a hard reset if it works slowly, hangs, you want to bypass screen lock, your memory is full, and you want to erase everything, you want to sell or give your device away, and you don’t want anyone to be able to access your files or passwords.

The following instructions will show you how to completely wipe up all of your data and restore the Tecno Spark 20 Pro+ to its factory-fresh condition.

Part 1: Why do I Need to Hard Reset My Tecno Spark 20 Pro+?

We advise you to remove all accounts from the Tecno Spark 20 Pro+ device before performing a factory reset, especially if you plan to sell, give away, or donate the 3.4. It is also a good idea to unlink the Google account. By doing this, we can prevent issues for new users as some more recent smartphones have a feature called FRP, or Factory Reset Protection, which requires the Google account or PIN number that was originally used to set up the Tecno Spark 20 Pro+ when a device is factory restored.

Part 2: How to Hard Reset My Tecno Spark 20 Pro+

1. Fastboot Mode

  • Shut down your phone.
  • Add a USB cord to your computer or laptop.
  • Your phone should now start up in Fastboot Mode after you press and hold the Volume Down + Power buttons for a few seconds. Tecno Spark 20 Pro+ Recovery Mode and Fastboot Mode
  • Using the ADB command, start Tecno Spark 20 Pro+ in Bootloader Mode or Fastboot Mode.
  • If your computer has ADB and Fastboot drivers installed, and your phone has USB debugging turned on, execute the command below after connecting it.
  • Launch Command Prompt (CMD) on your PC, then type the command listed below.

reboot bootloader using adb

  • After some time, you will see that your Tecno Spark 20 Pro+ has been hard reset.

2. Hard reset with hardware key button

  • Choose “wipe data/factory reset” on your Tecno Spark 20 Pro+ to do a hard reset. Scroll down with the Volume buttons, and press the Power key to agree.
  • Next, choose yes from the menu if further confirmation is required, and then click the Power button once.
  • Lastly, press the Power key and choose the Reboot system.
  • Do not forget to charge your phone.
  • Initially, turn off your phone.
  • Now Press the Volume Up + Power key for a few seconds to enter recovery mode.
  • Press and hold the Power and Volume Up buttons at the same time until the Tecno Spark 20 Pro+ device vibrates. Release all the presses if the Tecno Spark 20 Pro+ logo or Recovery screen shows.
  • You can give your phone up to 30 seconds to display the recovery screen.

Bonus Tips

Dr.Fone - Data Eraser

Dr.Fone - Data Eraser helps you quickly get rid of all the unwanted information and all of your data however it is always advisable to back it up using the Dr.Fone - Phone Backup.

Let’s see how you can delete completely all the data using Dr.Fone - Data Eraser. do not worry the next section is about how you can back up and restore the data before erasing it completely using Dr.Fone - Phone Backup.

Step 1: Connect your Tecno Spark 20 Pro+ smartphone to your computer. Start Dr.Fone on your computer. Select “Data Eraser” from the tool list.

![drfone home page](https://images.wondershare.com/drfone/guide/drfone-home.png)

Connect your Tecno Spark 20 Pro+ to the PC via a USB wire. Ensure that your phone has USB debugging turned on. You will see a pop-up window on your phone asking you to approve USB debugging.

connect to device

Step 2: Begin wiping your Tecno Spark 20 Pro+ phone.

Dr.Fone will then automatically recognize and connect to your Tecno Spark 20 Pro+ smartphone. To begin wiping all of your data, select “Erase All Data.”.

erase all data

Before proceeding, ensure that you have backed up any critical data because deleted data cannot be retrieved. After that, type “000000” to confirm your activity.

code to erase

Dr. Fone will next proceed to wipe the data on your Tecno Spark 20 Pro+ phone. The entire procedure takes only a few minutes. Turn off the phone and do not run any phone administration programs on the PC.

erasing data

Step 3: Reset your phone’s factory data.

Once all app data, photos, and other private data have been completely erased, Dr.Fone will advise you to touch on Factory Data Reset or Erase All Data on the phone. You may use this to completely delete the phone’s settings.

erase successfully

Your Tecno Spark 20 Pro+ phone has now been completely wiped, giving it the appearance of being brand new.

safe Download safe & secure

Dr.Fone - Phone Backup

Step 1: Connect your Tecno Spark 20 Pro+ phone to your PC.

drfone home page

Launch Dr.Fone on your PC and choose “Phone Backup” from the list of options.

Then, connect your Tecno Spark 20 Pro+ phone to the computer using a USB cord. Please ensure that the phone is in USB debugging mode. If your Tecno Spark 20 Pro+ version is 4.2.2 or higher, a pop-up window on the Tecno Spark 20 Pro+ phone will prompt you to accept USB Debugging. Please press the OK button.

backup and restore

To begin backing up the data on your Tecno Spark 20 Pro+ phone, click Backup.

If you have previously used this application to back up your device, you may examine your backup history by clicking on “View backup history.”

Step 2: Choose which file types to back up.

After connecting the Tecno Spark 20 Pro+ phone, pick the file types you wish to back up. Dr.Fone has already tested all of the file kinds for you. Then, to begin the backup process, click Backup.

file types

The backup will take a few moments. Please do not detach your Tecno Spark 20 Pro+ phone, use it, or erase any data from it during the backup process.

backup completed

When the backup is finished, you can view the contents of the backup file by clicking the View the backup button.

safe Download safe & secure

The Bottom Line

Now that you know how to hard reset Tecno Spark 20 Pro+ it is time to implement all the possible ways and see which one works for you. We also recommend you to proceed with backing up and restoration of all the information so that you will not have to repent in the end. It is all about using smart tools like Dr.Fone - Data Eraser and Dr.Fone - Phone Backup.


  • Title: 5 Ways to Reset Tecno Spark 20 Pro+ Without Volume Buttons | Dr.fone
  • Author: Nova
  • Created at : 2024-07-17 15:41:26
  • Updated at : 2024-07-18 15:41:26
  • Link: https://phone-solutions.techidaily.com/5-ways-to-reset-tecno-spark-20-proplus-without-volume-buttons-drfone-by-drfone-reset-android-reset-android/
  • License: This work is licensed under CC BY-NC-SA 4.0.