Data Disappears in Excel - How to get it back

Summary: You may face the issue of ‘Excel spreadsheet data disappeared’ after changing Excel file properties and formatting rows and columns. This blog discusses the possible reasons for data disappearance and the solutions to fix the issue. Also, it mentions an Excel file repair tool to retrieve the data from the file. Sometimes, while editing or formatting a cell in an Excel spreadsheet, the data may go missing or disappear. Let’s discuss in detail the reasons that may cause the ‘Excel data disappeared’ issue along with the solutions.

Probable Reasons for Data Disappearing in MS Excel and Solutions Thereof

Reason 1 – Unsaved Data

While entering data in an Excel spreadsheet, it is important to save the data at frequent intervals. Doing so prevents any unsaved data from disappearing if you lose power or accidentally click ‘No’ when prompted to save the file. Unfortunately, such a situation is quite common as users often close the file without saving the recently made changes to a spreadsheet.

Solution – Use the ‘AutoSave’ Feature

With the AutoSave feature enabled in Excel, data won’t be lost in the event of power failure or abruptly closing the Excel program. By default, Excel automatically saves the information in a spreadsheet after every 10 minutes. You can reduce the limit to a few seconds to reduce the chances of Excel file data lost after being saved.

Reason 2 – Changing Excel Format

You can save an Excel file in various formats, like spreadsheet, text, webpage, and more. However, at times, saving the spreadsheet in a different format may lead to missing data. For example, when you save a workbook to a text file format, all formulas and calculations applied to the data will be lost.

Solution – Adjust a Spreadsheet for the Changed Format

If you’re changing the format of a spreadsheet, make space for the rows and columns. Also, remove all calculations before saving the file.

Note: If the sheet is shared on multiple computers, then save the file in compatibility mode.

Reason 3 – Merging Cells

You can combine two or more cells data to make one large cell. This technique is primarily used to fit the text of a title in a sheet. If there is data in two or more cells, then only the data in the top-left cell is displayed and the data in all other cells is deleted. If the other merged cells have been populated with data after merging, the data is not featured and it does not appear even after remerging the cells.

Solution – Merge Cells inside One Column

To merge cells without data loss, combine all the cells you want to merge within a column and do the following:

• Select the cells to be combined.
• Ensure that column width is wide enough to fit the contents of a cell.
• In the spreadsheet, under the Editing group, click ‘Fill,’ and then click ‘Justify.’

• Under Alignment, click on the ‘Merge & Center’ option to center align the text. Or, click on ‘Merge Cells’.

Note: This solution works for text only. You cannot use it to merge formulas or any numerical values. If you need to combine two or more cells with formula into a single cell, try using the Excel CONCAT function .

Reason 4 – Cell Formatting

Cells and text in the cells can be displayed in different colors to make the spreadsheet simple to create and infer. You may experience data loss when you try to modify the data or change the color or size of the data. Though the information may exist, the data may show an error due to the following reasons:  

• White-colored text will not show in a white-colored cell
• Large font-sized data may not appear in small-sized cell
• Calculations may show (#VALUE) error after cell-formatting

Solution – Check and Clear Formatting

Make sure to use dark-colored text on a white-colored cell. Also, resize the cell to fit the text size. Check if numbers in a cell are entered as text. If so, you need to apply a number format to the text-formatted numbers. Read more about it, from here .

What Else You Can Do to Resolve the ‘Excel Data Disappeared’ Issue?

If you can’t recover the missing Excel file data, try to repair or extract the data from the file using the built-in Excel repair tool. Follow the below steps to use the tool:

• Open MS Excel, click File > Open > Computer > Browse.
• On the ‘Open’ window, select the file you want to repair and then click on the Open dropdown.
• Select Open and Repair.

Use the ‘Repair’ option to repair the file and recover as much data as you can from the repaired file. If this doesn’t work, use the ‘Extract’ option to recover the data.

If you fail to retrieve the disappeared data from that file using the above-listed steps, opt for an Excel repair tool , like Stellar Repair for Excel. This software has a proven track record of repairing corrupt or damaged Excel files and recover all the data.

The software helps:

• Fix all corruption errors. It helps in getting back the data which has disappeared.
• Repair a single as well as multiple Excel files.
• Recover all components of XLS/XLSX files – tables, chart sheet, cell comment, image and more.
• Preserve the worksheet properties and cell formatting.
• Support the latest Excel 2019 and earlier versions.

The Excel repair software repairs the Excel file in these simple steps:

• Launch and open the software.
• Select the corrupt Excel file by using the ‘Browse’ option. If the file location is not available, then find the Excel file using the ‘Search’ option.

• Click ‘Repair’ to scan the corrupt file.

• Once the repair process is complete, verify the components of Excel file and check if the available preview shows complete data that disappeared from Excel.

• Save file at default location or preferred location.

The Excel file with all the restored data will be saved at the selected location.

Conclusion

It is better to repair the affected Excel file than suffer the loss when data or text disappears in Excel. A professional software ensures that users get back all the data in the form of a new Excel file. Stellar Repair for Excel software repairs the corrupt file without modifying the original content and file format. The software’s easy-to-use user interface lets you perform the functions without formal software training and technical expertise.

How to Fix Excel Run Time Error 1004

Summary: Run-time errors are windows-specific issues that occur while the program is running. This blog will teach you how to fix Excel run-time error 1004. In addition, you’ll learn about an Excel repair tool that can help fix the error 1004 if it occurs due to corruption in Excel files.

VBA (Microsoft Visual Basic for Application) is an internal programming language in Microsoft Excel. Sometimes, when users try to run VBA or generate a Macro in Excel, the Run-time error 1004 may occur. This error may occur due to the presence of more legend entries in the chart, file conflict, incorrect Macro name, and corrupt Excel files. In this blog, we have discussed the reasons and shared some solutions to resolve run-time error 1004.

Why This Error Occurs?

The run time error 1004 usually occurs when you run a VBA macro with the Legend Entries method to modify the legend entries in the MS Excel chart. It happens when the chart contains more legend entries than the available space, macro name conflicts, corrupt Excel files, or data-types mismatch in the VBA code.

Ways to Fix Excel Run-Time Error 1004?

Try the below workarounds to fix Excel run-time error 1004:

Create a Macro to Reduce Chart Legend Font Size

Sometimes, Excel throws the run-time error when you try to run VBA macro to change the legend entries in a Microsoft Excel chart. This error usually occurs when Microsoft Excel truncates the legend entries because of the more legend entries and less space availability. To fix this, try to create a macro that shrinks/minimize the font size of the Excel chart legend text before the VBA macro, and then restore the font size of the chart legend. Here is the macro code:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

VBCopy
Sub ResizeLegendEntries()

With Worksheets("Sheet1").ChartObjects(1).Activate
      ' Store the current font size
      fntSZ = ActiveChart.Legend.Font.Size

'Temporarily change the font size.
      ActiveChart.Legend.Font.Size = 2

'Place your LegendEntries macro code here to make
         'the changes that you want to the chart legend.

' Restore the font size.
      ActiveChart.Legend.Font.Size = fntSZ
   End With

End Sub
Note: Make sure you have an Excel chart to run the code on the worksheet.

Uninstall Microsoft Work

You may encounter a run-time error 1004 in Excel version 2009 or older versions due to conflicts between Microsoft works and Microsoft Excel. This error usually occurs if your system has both Microsoft Office and Microsoft Works. Uninstalling one of them will fix the issue. Try the below steps to uninstall Microsoft Work:

• First, open the Task Manager using the shortcut CTRL + ALT + DEL altogether
• The Task Manager window is displayed.

• Click the Process tab, right-click on each program you want to close, and then click End Task.
• Stop all the running programs.
• Open the Run window and type appwiz.cpl to open the Programs and Feature window.

• Search for Microsoft Works and click Uninstall.

Try Deleting GWXL97.Xla File

The Add-ins files with .xla extension in MS-EXCEL is used to provide additional functionality to Excel spreadsheets. Sometimes, deleting the GWXL97.XLA file fixes the run-time error. Here are the steps to delete this file:

• Make sure you have an Admins rights, open the Windows Explorer
• Follow the Path C:\Programs Files\MSOffice\Office\XLSTART.
• Find and right-click on the GWXL97.XLA file
• Click Delete.

Change Trust Center Settings

Sometimes, run-time errors might arise because of incorrect security settings. The Trust Center settings help you find the Privacy and security settings for Microsoft Excel. Follow the below steps to change the Trust center settings:

• Open Microsoft Excel.
• Go to File > Options.
• The Excel options window is displayed.
• Choose Trust Center, and click Trust Center Settings.
• Tap on the Macro Settings tab, and select Trust access to the VBA project object model.

• Click OK.

Run Open and Repair Tool

The Runtime error also arises when MS Excel detects a corrupted worksheet. It automatically begins the File recovery mode and starts repairing it. However, if the Recovery mode fails to start, use the Open and Repair tool with the below steps:

• Click File > Open.
• Click the location and folder with a corrupted workbook.
• In the Open dialog box, choose the corrupted workbook.
• Click the arrow next to the Open tab, and go to the Open and Repair tab.
• Click Repair.

You can also opt for Stellar Repair for Excel if the Microsoft Excel’s built-in tool cannot fix the error.

Use Stellar Repair for Excel

Stellar Repair for Excel is a professional software for repairing damage. xls, .xlsx, .xltm, .xltx, and .xlsm files and recovering all its objects. Here are the steps to fix the error using this tool:

• First, download, install, and run Stellar Repair for Excel.
• Click the Browse tab on the interface window to choose the corrupted Excel file you need to repair.
• Click Scan. You will see the scan progress in the scanning window.
• Click OK.
• The tool can let you preview all the recoverable Excel file components including tables, pivot tables, charts, formulas, etc.
• Click Save to save the repaired file.
• A Save File dialog box will appear with the below two options:
• Default location
• New location
• Choose a suitable option.
• Click the Save option to repair the Excel file that you have chosen.
• Once the repair is complete, it will display a message “File repaired successfully.”
• Click OK.

Conclusion

Now you know the Excel run-time error 1004, its cause, and solutions. Follow the workarounds discussed in the blog to rectify the error quickly. However, Stellar Repair for Excel makes your task of removing run-time errors easy. It’s a powerful software to fix all the issues with Excel files. Also, it helps in extracting data from the damaged file and saves it to a new Excel workbook.

How to fix Microsoft Excel not responding error and save your data

Summary: This guide helps you resolve Excel not responding and frequent Excel freeze issues in Excel on Windows 10. It mentions some effective solutions to repair Excel and resolve Excel is not responding problem. These solutions will also help you fix Excel crashing problem while working on the spreadsheet.

Similar to any other program, you may experience problems with Microsoft Excel while opening or working on a document. Sometimes, it may not start at all or freeze and display an error message such as ‘Excel is not responding’. When it happens, you may want to wait for the program to respond.

‘Microsoft Excel is not responding’ problem

Tip: If you are experiencing Excel not responding problem with a particular Excel file, it’s quite possible that the file is corrupt or partially damaged. And thus, leading to an Excel freeze or crash problem. Use Stellar Repair for Excel software to quickly repair and restore Excel (.xls/.xlsx) file in its original, intact form. You can download the free trial version of the software from the below link.

But if Excel doesn’t respond after a while and remains stuck, you need to force close the program from “Task Manager”. Now, this could be disastrous if happens while you are working on an important Excel document that took you hours to prepare. Force closing Excel due to such error can damage the Excel document and it may fail to open next time.

Why Excel is Not Responding?

Excel may stop responding, freeze, or crash suddenly due to several reasons. It can happen while saving a spreadsheet or opening an Excel document. It may also occur while editing or inserting images, graphs, etc. But usually, it occurs when the system crashes or shuts down abruptly while you are working on a document. Here’s an instance,

Suppose, you worked overnight on a critical document which is to be presented at a meeting the next day. This Excel spreadsheet includes critical graphs and charts, and much more. When you are about to save it, there is a power failure, and your system shuts down without warning. When the power is up, you restarted the system to check your Excel. To your dismay, a message pops up – “Excel Crashed” or “Microsoft Excel not responding”.

This could be frustrating. However, there is no need to despair as there are solutions to not just overcome this error but other corresponding issues such as Excel freezing, hanging, crashing, etc. Below is an infographic that quickly briefs all the possible solutions to fix Excel not responding error.

Solutions to Fix ‘Microsoft Excel is not responding’ Error

Follow the solutions discussed below in the given order to fix Excel freezing and hanging issues.

Solution 1: Open Excel in Safe Mode

If Excel is not working as intended and frequently stops responding, you may try to start Excel in Safe Mode. It is a common DIY way to fix ‘Excel is not responding’ problem.

In Safe Mode, Excel starts with only essential services, bypasses certain functionalities and doesn’t load the add-ins, which might be the reason behind the error in MS Excel . To open and troubleshoot Excel in Safe Mode:

• Press Windows + R keys, type excel.exe /safe and press ‘Enter’ or click ‘OK’

MS Excel in Safe Mode

Open the Excel file and check if it still crashes. If not, the problem could be a faulty add-in or formatting and styling error.

Proceed to the next solution to check and fix the problem.

Solution 2: Check for Faulty and Unwanted Add-ins

In Microsoft Excel, there are two types of add-ins:

• COM add-ins
• Other Add-ins Installed as XLAM, XLA, or XLL File

Both types of add-ins can cause the freezing problem in Excel . Follow the steps below to disable unwanted and faulty add-ins:

• In Excel , click File and go to Options to open ‘Excel Options’ window
• Click Add-ins button to view and manage ‘Microsoft Office Add-ins’
• Uncheck required add-ins to disable them
• At this stage, you can also click the ‘Remove’ button to remove any unwanted add-ins

Disable COM Add-Ins

• Now enable an add-in and check the Excel performance. Observe Excel for not responding error or freezing problem

If Excel doesn’t freeze, enable subsequent add-in and then again use Excel to observe it. Repeat the steps until you find the faulty plugin, which is causing the problem.

Then remove it from Excel add-ins to resolve the problem.

Solution 3: Install the latest Windows and Office Updates

This problem may also occur if Windows and MS Office are not updated. Therefore, install the latest updates for both Microsoft Windows and Microsoft Office.

You can set the installation and update option to ‘Automatic mode’ in Windows. This will download and install critical updates for MS Office, which might fix the Excel performance issue. The steps to enable automatic updates are as follows:

1. Go to Settings> Update & Security> Windows Update

Enable Automatic Windows updates

• Click Advanced options and enable all the toggle switches to automatically download and install updates for Windows and other Microsoft products

Update Microsoft Products

After update, restart Excel and check if the problem is resolved.

NOTE: From now on, MS Excel will also get the latest update consistently, without the need for manual intervention.

Solution 4:  Check and Disable Anti-virus

Antivirus is important for device safety. However, if your antivirus conflicts with MS Office apps such as Excel, it could lead to Excel freezing and not responding errors.

To check if the problem is due to anti-virus, disable it and reopen the Excel document. Check if Excel performs well or if it still hangs.

Example of Antivirus conflict with Microsoft Excel

If the problem is resolved, contact your antivirus software provider for help to keep antivirus running without affecting the system and other programs such as MS Excel.

Solution 5: Change the ‘Default Printer’

Although it may seem irrelevant, changing the default printer is another easy and effective solution to overcome the error. Reason being, Excel communicates with the printer to find supported margins when we open an Excel sheet.

If Excel doesn’t find the supported margin, it may stop responding or crash. The steps to change the default printer are as follows:

1. Open Control Panel on your Windows system
2. Click Printer and Devices
3. Right-click Microsoft XPS Document Writer to set it to the default printer

Change in Default Printer Setting

Reopen the Excel document to check whether the error occurs or not.

Solution 6: Repair Microsoft Office

A corrupt or damaged Microsoft Office can also cause the ‘Excel is not responding’ problem. You can resolve this by repairing the Microsoft Office files. The steps are as follows:

1. Close all running MS Office programs
2. Go to Control Panel on your Windows system
3. Click Programs and then Programs and Features
4. Select Microsoft Office and in the Microsoft Office window, click ‘Change’
5. Then select the ‘Repair’ option and click ‘Continue’

Repair MS Office

This may take a while. After the repair is done, check your Excel program and file for the error.

Solution 7: Remove and Reinstall Microsoft Office

Sometimes, repairing MS Office may not work. In such a case, removing and reinstalling Microsoft Office can resolve the ‘Excel is not responding’ problem. To do so, follow these steps:

1. Close all running MS Office programs
2. Go to Control Panel on your Windows system
3. Click Programs and then Programs and Features
4. Right-click on Microsoft Office and choose Uninstall

Uninstall MS Office

Then run the MS Office installation setup to re-install MS Office on your system.

Solution 8: Repair Microsoft Excel (XLS/XLSX) file

In several situations, a corrupt or partially damaged Excel (XLS/XLSX) file is the cause of this error. In such a case, you can download and install Stellar Repair for Excel to repair the corrupt or damaged Excel file. By repairing the Excel file, you can resolve the Excel freezing error quickly without applying much efforts.

The steps to use the software for Excel file repair are as follows:

1. Download, install and launch the Excel file repair software
2. Browse and select the corrupt Excel file

• Click ‘Repair’ to start repairing the damaged Excel file
• After file repair, it provides a preview. Check your file

• Then click the ‘Save File’ option in the main menu
• You can either choose default location or browse a new folder location to save the repaired Excel file

• After repair, open the file in Excel and continue with your work

And keep Stellar Repair for Excel installed on your system. You never know when you might need this handy tool.

You may also refer to Microsoft support for more details on Excel not responding, hangs, freezes or stops working issues.

Conclusion

Now that the methods for fixing the ‘Excel is not responding’ error are before you, try all these and see which one works for you. If the cause of this error is a damaged or corrupt Excel file, only repairing the XLS/XLSX file can resolve the issue.

For this purpose, it’s recommended to use a reliable software such as Stellar Repair for Excel as it offers an easy-to-use interface, thereby making Excel file repair process a seamless experience.

The software recovers table, chart, chart sheet, cell comment, number, text, shared formulas, image, formula, sort and filter, and other objects. It also preserves worksheet properties, layout, and cell formatting. It can repair multiple XLS/XLSX files simultaneously and fix all Excel file corruption errors.

All these features extend the software capabilities beyond just fixing the ‘Excel not responding’ error.

[Solved] Excel Spreadsheet Disappears after Opening

Several Excel users have reported about experiencing ‘Excel spreadsheet disappears after opening’ issue. The problem occurs when attempting to open an Excel file by double-clicking on the file icon or name. The Excel file opens blank grey screen.

Figure 1 - Excel Blank Screen

User Instances of ‘Excel Open But Can’t See Spreadsheet’ Issue

Instance 1: The user said that “Excel 2016 opens to a blank screen and everything is greyed out. Ribbons at the top of Excel are also not present”.

Instance 2: The user reported that “Attempting to open a spreadsheet, either by double-clicking the file or by opening Excel, it opens but only a blank Excel window is visible. When trying to save that particular file, Excel behaves as though there is no file open at all and all the file saving options, such as save, save as, print, etc. are greyed out.”

Causes Behind ‘Excel Open But Can’t See Spreadsheet’ Issue & the Solutions Thereof

Following are some of the possible reasons behind the ‘Excel open but can’t see spreadsheet’ issue, along with their solutions:

Cause 1: Excel File is Hidden

You may have saved the Excel sheet as a hidden document.

Solution: Unhide Excel File

Verify if your Excel worksheet is hidden by following these steps:

• In Excel, click the View tab, and then click Unhide.

Note: If the ‘Hide’ tab under the View menu is greyed out, the sheet you’re trying to open is not hidden. In that case, proceed to the next workaround.

Figure 2 - Unhide Excel File

• A dialog box will pop-up showing the worksheet name that can be unhidden. For instance, below is an image of Unhide box that lists ‘Daily_Reports’ spreadsheet under Unhide workbook.

Figure 3 – Select and Unhide Excel Workbook

• Click OK to unhide your Excel sheet.

If this fails to work, there’s a possibility that the spreadsheet window pane may have slided to one side of the visible desktop. To bring back the displayed area, click the ‘Arrange All’ option under the View tab. If the issue persists, try the next solution.

Cause 2: Ignore Dynamic Data Exchange (DDE) Option is Enabled

Another reason behind the ‘Excel opens to a blank screen’ issue could be that the “Ignore other applications that use Dynamic Data Exchange (DDE)” checkbox is checked in Excel options.

Usually, when you double-click an Excel file, a DDE message is sent to Excel instructing it to open that particular file. But, if you have the ‘Ignore DDE’ option selected, the DDE message sent to Excel to open a workbook is ignored. As a result, the Excel workbook opens a blank screen.

Solution: Uncheck the Ignore DDE Option

Make sure that the ‘Ignore DDE’ option is unchecked by performing these steps:

Note: Skip these steps for Excel 2019 and Excel Office 365.

• In your Excel window, click File > Options.

Figure 4 - Select Excel Options

• From the left-side of the ‘Options’ window, choose Advanced.

Figure 5 - Excel Options Window

• In ‘Advanced’ window, locate the General section, and then uncheck the “Ignore other applications that use Dynamic Data Exchange (DDE)” checkbox.

Figure 6 - Uncheck Ignore Other Applications that use DDE

• Click OK to apply the changes.

If these steps don’t work, proceed to the next workaround.

Cause 3: Issue within Office Program

Sometimes, problem within your Microsoft Office program might cause Excel to behave oddly and may result in an Excel spreadsheet disappeared issue.

Solution: Repair Office Program

Try repairing your Office program by executing the steps listed below, based on your Windows OS:

For Windows 10:

• Type Settings in the Windows search box.
• Click Settings.
• In ‘Windows Settings’ screen, select Apps.

Figure 7 - Windows Settings Screen

• In ‘Apps & features’ screen, scroll down to your Microsoft Office program and tap on it, and then click the Modify

Figure 8 - Modify MS Office Program

• In ‘How would you like to repair your Office programs’ dialog box, select the Online Repairradio button, and then click the Repair

Figure 9 - Repair MS Office Program

For Windows 8:

• Open Control Panel and click the Uninstall a program option under Programs.
• Select Microsoft Office 365 and then click Change.
• In the window that opens, select Online Repair and then hit the Repair

You may be asked to restart your system after completion of the repair process.

For Windows 7:

• In ‘Control Panel’ window, double-click Programs and Features.
• Under Uninstall or change a program section, select the Office program, and then select Change.
• In the dialog box that appears, choose Online Repair and then choose Repair.

If repairing your Office installation fails to resolve the issue, continue to solution 4.

Cause 4: Problematic Excel and COM Add-ins

Sometimes, Excel and COM add-ins may cause Excel file open a blank grey screen problem.

Solution: Disable the Add-ins

Disabling the Excel and COM add-ins one at a time may help resolve the problem. The steps are as follows:

• Click the File menu in your Excel file and select
• From ‘Excel Options’ left-side panel, click Add-Ins, and then choose COM Add-ins from the ‘Manage’ drop-down. Click the Go

Figure 10 - Select COM Add-ins

• Uncheck one of the add-ins checkbox from the COM Add-ins window, then select OK.

Figure 11 - Uncheck and Disable COM Add-ins

• Restart your Excel program.

If the issue persists, repeat the above steps (1 till 4), except that you need to choose a different add-in in step 3.

If you’re still experiencing the same problem after unchecking all the COM add-ins, repeat all the above steps, except choose ‘Excel Add-ins’ in step 2.

If Excel can load the file, then the add-in that you disabled last leads to the problem. If turning off add-ins does not work, try the next solution.

Cause 5: Problem with Excel File Associations

The Excel file opening a blank screen problem may occur if the file associations are not performing correctly.

Solution: Reset Excel File Associations

Try resetting the file associations in Excel to their default settings. For this, follow the below steps based on your OS.

For Windows 10 and Windows 8.1:

• Select the file that is opening incorrectly and copy it to the desktop.
• Right-click the file and click Properties.
• In the File’s ‘Properties’ window, check your file type next to Type of Filefrom the General tab. For instance, (.docx), (.csv), or (.pdf).
• Next, check to which app your file is associated with from the Opens withoption

If the file type is different than .xlsx, open the file in a different application by following these steps:

• Click the Change button next to the ‘Opens with’ option.
• Click More apps.
• From the list of applications, select the desired app and then check the Always use this app Click OK.

For Windows 8:

• Open Control Panel, click Default Programs, and then select Set your default programs.
• Choose Excel and then tap the Choose default for this program
• In ‘Set Program Associations’ window, choose Select All and then click Save.

For Windows 7:

• In Control Panel, choose Default Programs.
• Click the Associate a file type or protocol with a specific program
• Choose Microsoft Excel Worksheet and click on change program.
• Choose Microsoft Excel under Recommended Programs.
• If you’re unable to find Excel, browse the Excel installation folder.
• Select exe and then choose Excel.

What Next? Use Stellar Repair for Excel to Recover Your File

If the above solutions don’t help recover your Excel file, use an Excel file repair tool, such as Stellar Repair for Excel to recover it. The software can restore the Excel spreadsheet and its components, including tables, pivot tables, charts, formulas, etc. while preserving the spreadsheet properties and formatting.

Check out the video to recover Excel file by using Stellar Repair for Excel software.

Conclusion

This article described the possible causes behind the ‘Excel open but can’t see spreadsheet’ issue, along with their solutions. The manual solutions to resolve the issue require time and efforts. But, if you need to access your Excel file without any delay, use Stellar Repair for Excel software to recover your .xlsx/.xls file in just a few clicks.

Excel Stuck at Opening File 0% - Resolve Performance Issues

Summary: If an Excel workbook is stuck at opening file 0%, it usually indicates a problem with the Excel file and its objects. This may happen due to Excel file corruption and a few other reasons. In this post, we have discussed these reasons along with the methods to fix and prevent ‘Excel stuck at opening file 0%’ issue.

When you open an Excel file (XLS/XLSX) in MS Excel, the program reads and then loads the file data along with all its objects and properties. While opening and loading an Excel file, MS Excel displays an “Opening percentage.” You won’t usually notice or see this Excel file opening progress percentage while accessing smaller worksheets.

It’s more noticeable when you open a large Excel file or workbook with multiple objects, formulae, formatting, etc. However, after opening an Excel file with double-click, if it is stuck at Splash Screen with a message “Opening: FileName.xlsx (0%)” for a while (say 15-30 minutes) and does not progress, it indicates a problem with the Excel file, MS Excel program, or the system.  

Why Excel is Stuck at Opening File 0%?

If you have encountered this error, it may happen due to one of the following issues,

1. Damaged or corrupt Excel file
2. Incompatible or faulty Excel add-ins
3. Problem with the system’s display driver
4. Damaged MS Office (Excel) application

Methods to Fix ‘Excel Stuck at Opening File 0%’ Issue

Before fixing and troubleshooting the problem, check and confirm if the Excel file is working and not corrupt. For this, you can try opening it on another PC. Now there could be two scenarios,

Scenario 1:  Excel File Does Not Open

If the Excel file doesn’t open on another PC also, it indicates Excel file corruption. In such cases, look for the backup copy of the file, if you have downloaded it from an email or a website.

However, if there’s no backup, then you need an Excel file repair software, such as Stellar Repair for Excel to repair the corrupt file. This software preserves Excel file properties, such as cell formatting, formula bar, freeze panes, gridlines, etc. and helps you restore the damaged or corrupt worksheets to its original state with 100% integrity.

To repair Excel file, download and launch Stellar Repair for Excel software on your PC, choose the corrupt Excel (XLS/XLSX) file and click ‘Repair’. You can see the preview of your Excel file with all data and then save the repaired file at your desired location on the system as a new Excel file.

Scenario 2: Excel File Is Accessible on Another PC

If the Excel file opens successfully on another PC, then follow the troubleshooting methods below to resolve the Excel file stuck opening at 0%.

Method 1: Open MS Excel in Safe Mode

To check if an incompatible or faulty add-in or setting is causing the error, restart MS Excel in safe mode and then open the worksheet from the MS Excel ‘File’ options. The steps are as follows,

1. Press Windows+R and type excel.exe /safe
2. Hit Enter or press ‘OK’ to open MS Excel in safe mode

• Go to File > Open and then choose the Excel file to open it
• If it opens, the problem is probably caused by the add-ins. Go to File > Options > Add-ins > Manage > COM Add-ins and disable all the third-party add-ins

• Restart MS Excel normally and then go to File > Open and open the same Excel file. If it opens, the problem is solved.

However, if you want to keep the add-ins, enable one add-in at a time and open the same file to find which add-in is causing the problem. When found, remove the faulty add-in.

If it doesn’t work, head to the next solution.

Method 2. Disable Hardware Graphics Acceleration

If you’re using hardware graphics acceleration adapter to run an external monitor, you may encounter problems with the Excel application. If the adapter is plugged in but doesn’t work correctly, Excel will usually hang on the loading screen. To resolve this problem, you will need to disable the hardware graphics acceleration adapter by following these steps,

• Quit all running instances of Excel from Task Manager

• Launch MS Excel directly, don’t double-click on the faulty workbook file to open MS Excel as it won’t open
• Click on File > Options > Advanced

• Under the ‘Display’ options, check the box ‘Disable hardware graphics acceleration’
• Click on ‘OK’

Try to open the Excel file now. If it still doesn’t work, move to the next solution.

Method 3. Repair MS Excel Application and Install the Latest Updates

Problems within MS Excel installation could also be a source of many unknown issues. Messed up registry settings, bugged updates, and even wrong user ‘Preferences’ can cause your Excel application to behave unusually. The fix for all such issues is to repair the Excel installation. To do so, follow these steps,

• Open Control Panel
• From Category view, under Programs, select Uninstall a program
• Click on the MS Office and then click ‘Change’

• When prompted, click on ‘Repair’ and then follow the instructions to complete the repair process

To update the MS Excel,

• Go to File > Account and click on Update options

• Then click ‘Update’

• MS Excel will start downloading the latest updates and then apply it, which might fix this Excel error

Still, Excel stuck on processing file at 0%? That means the Excel file you’re trying to open is severely corrupted. Thus, as mentioned earlier, use Stellar Repair for Excel software to repair corrupt or damaged Excel (XLS/XLSX) files and restore everything to a new Excel file. With the help of some best-in-class repair algorithms, this software enables you to fix problems within Excel files and recover tables, charts, cell comments, images, formulae, sorts, and filters. It is compatible with MS Excel 2019, 2016, 2013, 2010, 2007, and 2003.

Conclusion

Hopefully, one of the above-mentioned solutions has helped you overcome the “Excel stuck at Opening file 0%” error and Excel hangs on opening file issues. Also, you are able to access your MS Excel worksheet now. If you face any problems with your Excel workbooks in future, remember to get to the root of the issue first. Also, inculcate the habit of backing up your critical files regularly (if possible) and keep products like Stellar Repair for Excel in mind to save the day, when nothing else works.

How Do I Repair and Restore Excel File?

When an Excel file turns corrupt, the file might become inaccessible or you might receive errors. You may encounter errors, such as ‘the file is corrupt and cannot be opened,’ ‘Excel found unreadable content in “filename>”,’ ‘Excel cannot open “filename” because the file format or extension is not valid,’ etc.

Common Reasons for Excel File Corruption

There are several reasons that can turn the file corrupt. The most common reason is a damaged hard drive. Other factors that can cause corruption in an Excel file are as follows:

• System crash or abrupt shutdown of the system while the file is still open
• Viruses infecting the file with malicious code
• Bug in the operating system
• Bad sectors on the drive where the file is stored
• Large spreadsheets with formulas and other components

Whatever be the reason, if your business is dependent on an Excel file, corruption in the file could hamper your business continuity. Also, you may lose crucial data. In such a situation, you could try to repair the file.

Before We Begin

It is important to identify the root cause behind Excel file corruption. If the problem has occurred due to a faulty hard disk drive, contact your hardware vendor to get it fixed. Also, move the file to another local drive and check if it opens. If nothing works, proceed with the methods discussed below to repair and restore the file.

Methods to Repair and Restore Excel File

Try the following methods to fix corruption in an Excel file and restore it.

Method 1 – Use the Built-in ‘Open and Repair’ Tool

You can use the Excel built-in Open and Repair utility to repair the corrupt file. Follow these steps:

• Open your Excel application and click on Blank workbook.

• On the blank workbook screen, click on the File tab.

• Click Open > Computer > Browse.

• Select the file you want to repair and then click on Open and Repair from the Open dropdown box.

• Click Repair to fix corruption in the Excel file and recover maximum data.

• If you get the following error message, click Yes to open the file.

• If clicking Yes opens the file with garbage entries (see the image below), perform Step 1 – 5 and click Extract Data. This will only help you recover data without formulas and values.

Note: You may also try to recover the data from a corrupted workbook by using the methods suggested by Microsoft .

A better way to repair and restore an Excel file with complete data is to use a specialized Excel file repair tool .

Method 2 – Use Excel File Repair Tool

Stellar Repair for Excel is a powerful tool designed to help users fix corrupted .xls or .xlsx files without any technical assistance. Also, the tool recovers all the components from a corrupted workbook, including tables, pivot tables, cell values, formulas, charts, images, etc. You can preview the repaired file and its contents by downloading the free demo version from the link below. It is a useful feature that allows the user to validate the data before saving it.

[

](https://tools.techidaily.com/stellardata-recovery/repaire-for-excel/ “Free Download For Windows”)

Here’s the step-by-step instructions to repair a corrupt Excel file using the software:

• Run the software. The software main interface opens with an instruction to add some add-ins if you’ve engineering formulas in the file you want to repair.

• Click OK to proceed.

• Select the file you wish to repair by using the Browse option.

Note: If you’re not aware of the file location, choose the ‘Search’ option to locate the file.

• A screen showing progress of the Excel file repair process is displayed.

• Preview of the repaired Excel file and its recoverable data is displayed.

• After verifying the data, click on the Save File button on the File menu to save the repaired file.

• Select the location where you wish to save the repaired file on the Save File window and then click OK.

A confirmation message will pop-up after completion of the repair process. You can now try to open the file in your Excel program.

End Note

Even if you’re taking preventive measures, you might still experience corruption in an Excel file. So, it’s crucial to take regular backups of your workbooks. For this, ensure that the ‘Always create backup’ option is enabled in Excel. You can find it in General Options by clicking on the Tools button in the Save As dialog box. Enabling it will ensure that the Excel backup file is updated with the changes made in a spreadsheet.

Additionally, ensure that the Excel ‘AutoRecover’ feature is set to save a version of your Excel file after every 10 minutes. You can increase or shorten the interval as per your requirement.

Get Rid of corrupt Excel File

Summary: What to do when an Excel file is corrupted? This is a common question that is often asked by Microsoft Excel users. If you too are seeking an answer to this question, read the blog to learn about a few manual workarounds and a specialized Excel file repair tool to resolve the Excel file corruption issue.

An Excel file gets corrupted due to various reasons such as a virus/malware attack, sudden system shutdown when the Excel file is still open, power failure while working with an Excel spreadsheet, etc.

When Microsoft Excel detects corruption in a workbook, it attempts to repair the workbook by starting ‘File Recovery mode’.

Tip! If the file recovery mode doesn’t start, you may use the manual repair process or an Excel repair tool, such as Stellar Repair for Excel to repair a corrupted Excel file. The software can help you quickly retrieve contents from a damaged, corrupt, or inaccessible Excel file and restore the file to its original state.

There even exist a few manual tips that can be used to recover data from damaged MS Office Excel files.

Workarounds to Use When an Excel File is Corrupted

Note: Before carrying out any of the repair and recovery workarounds, it is advised that you must save a backup copy of the damaged file. This is to prevent your files from turning completely inaccessible in case the methods fail to give desired results.

Workaround 1: Use the Open and Repair Method

If MS Excel cannot repair a corrupted workbook automatically, you can try to do it manually. To do so, perform the following:

• Open the corrupt file, like you normally open any file, by clicking File > Open.
• Browse and locate the folder containing the corrupted document.
• When the Open dialog box is displayed:
• Select the Excel document.
• Click on the arrow present to the right side of the Open button and select Open and Repair option.

Figure 1 – Open and Repair Feature

If this doesn’t help repair the broken Excel file or you encounter  Open and Repair does not work issue, proceed with the next workaround.

Tip! Try an alternative solution, i.e. Stellar Repair for Excel software to repair and recover corrupt Excel files (.xlsx or .xls) when the ‘Open and Repair’ method won’t work.  

Workaround 2: Restore an Excel File with a Shadow Copy

If you’re a Windows 7 or Vista user, you can try restoring the corrupted spreadsheet by using a shadow copy (or a previous version). [Shadow copy](https://en.wikipedia.org/wiki/Shadow_Copy#:~:text=Shadow%20Copy%20(also%20known%20as,the%20Volume%20Shadow%20Copy%20service .) is basically a snapshot (backup copy) of computer files or volumes. The snapshot may contain an older version of your Excel file that has become damaged now. To find out, do the following:

• Launch File Explorer, and right-click the folder in which the file is saved.
• Choose Properties.
• Look for and click the Previous Versions tab. This will display a list of entries under Folder versions or File versions, going back a few days or weeks.
• Double-click one with a date when the file was accessible and could be read. Then, try to open its older version. If it opens, save the older version with a new name and execute the procedure with new file/folder entries.

Figure 2 – Volume Shadow Copy

You would have to repeat the process until you reach the point where the file became damaged. With this, you will get a baseline version of the file, but data may still have been lost.

Workaround 3: Test your Assumptions

If you receive a message saying “Excel file corrupted and cannot be opened”, you would probably believe it. However, there could be other reasons besides corruption that may cause Excel to throw this error message.

Your Office suite, which Excel is a part of, maybe having some primary issues in it causing problems while opening one Excel document. So, try opening another Excel file to check if the problem exists with all the files or just one.

If other Excel documents work correctly, it means that only the particular document is corrupt. On the contrary, if the issue is with your Office suite, repairing the current Office installation may help fix the issue. For this, perform these steps:

• Go to Control Panel and click Uninstall the Program.
• Choose Office.
• Click Change, and hit the Repair button.

You can reinstall the entire Office package. Once reinstalled, try to open the file to check if the issue has been fixed and the Excel file repaired.

Figure 3 – MS Office Repair

Workaround 4: Use Excel File Repair Tool

If the above manual solutions fail, use Excel repair software to successfully repair your damaged Excel workbook and recover all its data. Essentially, the software rebuilds damaged Excel workbook data at a granular level to recover every single object & all the original properties of the workbook.

Suggested Read: How to repair corrupt Excel files using Stellar Repair for Excel?

Why Use Stellar Repair for Excel Software?

• Repairs severely corrupted XLSX and XLS files.
• Can handle corrupt Excel files of any size.
• Demo version allows previewing recoverable Excel file items for free.
• Supports Microsoft Excel 2019 and all lower versions.
• Compatible with Windows 10 and lower versions.
• Tested and recommended by Microsoft Excel MVPs.

Final Word

When an Excel file is corrupted, it won’t open at all or you won’t be able to access all the file data. Such a situation can lead to unnecessary halts, impacting work productivity.

There are manual workarounds that may help fix the corrupt Excel file and recover its data, such as the ones covered in this blog. However, these solutions might not work in severe corruption cases and may require technical assistance. Also, they may result in some data loss.

To overcome the limitations of manual workarounds, it is recommended to go for a professional Excel file repair tool such as Stellar Repair for Excel . It helps repair corrupt Excel (XLS or XLSX) files and restores all worksheet data, such as the table, chart, chart sheet, cell comment, sort and filter, image, formula, etc. in a few simple clicks. Moreover, the software provides a free preview of the recoverable data with its demo version. You can check the preview to evaluate how the software works.