File Format and Extension of [filename] don’t Match in Excel File

Summary: The “File format and extension of [filename] don’t match. The file could be corrupted or unsafe” error message indicates that the Excel file you’re trying to open is unsupported, unsafe, or corrupted. Read this article to learn more about this error and how to fix this error. It also mentions an advanced Excel recovery tool to repair the corrupted Excel file and retrieve all its data in a few clicks.

You can encounter the “File format and extension of [filename] don’t match. The file could be corrupted or unsafe” error when the Excel application detects any issue with the file. This happens when you try to open an old version file format in a newer version or if the file is received from an unsafe destination. This can prevent you from opening the Excel file.

As indicated from the error message, this error occurs due to the following reasons:

• The file has incorrect file extension.
• The file is corrupted.
• The file you are trying to open is protected.

Now, let’s see how to resolve this Excel error.

Methods to Fix the “File format and extension of [filename] don’t match” Error

Try the following methods to troubleshoot the “File format and extension don’t match” error in Excel.

Method 1: Rename the Excel File

You can face the “File format and extension don’t match” issue if the file has incorrect extension. It can occur if the file extension has been altered or you’ve mistakenly saved the file with incorrect extension. To fix this, you can try renaming the Excel file with the correct file extension.  

Method 2: Check the Default Excel File Format

Different versions of Microsoft Excel use different default file formats. For example, .xls is the default file format of older versions (2003 and lower) of Excel, whereas .xlsx format is used by the newer versions (2007 and later). Opening the Excel file with an incompatible extension can cause the “File format and extension don’t match” issue. You can check the Excel version you are using and ensure it’s compatible with the Excel file you are trying to open.

Method 3: Change the Protected View Settings

You may receive the “File format and extension of excel don’t match” error if the Excel file is protected. You can check and try disabling the Protected View settings .  

Caution: Changing the Protected View settings can put your system at risk. If the Excel file is being downloaded from the internet, it may contain viruses that can infect your system. So be careful before disabling the Protected View settings.

Steps to Change Protected View Settings in Excel:

• In the Excel’s File menu, click on Options.
• Select Trust Center > Trust Center Settings.

• Under Trust Center, select Protected View and disable the below three options:
• Enable Protected View for files originating from the internet.
• Enable Protected View for files located in potentially unsafe locations.
• Enable Protected View for Outlook attachments.

• Click OK. Then, try to open the Excel file.

Method 4: Check and Provide the Excel File Permissions

Sometimes, you can get the error if you don’t have sufficient permissions to open the Excel file. This usually happens when you try to open the Excel file received from other sources. You can check and provide the desired permissions to fix the error. Here are the steps:

• Locate the affected Excel file, right-click on it, and select Properties.

• In the Properties window, click the Securities option and select Edit.

• In the Security window, under ‘Group or users name’, select the user names. Check the file permissions and make sure Full Control is enabled. If not, then click on the Add option.

• Click on the Advanced option in the Users, Computers, Service Accounts, or Groups window**.**

• Click the Find Now option. A list of all users and groups appears in the search field.

• Select “Everyone” from the list and then click OK.

• In the object names field, you will see ‘Everyone’. Click on OK.

• In the Permissions window, select “Everyone” and enable all options (Full Control, Modify, Read & Execute, Read, and Write) under Permissions for Everyone.

• Click Apply and then OK.

Method 4: Repair your Excel File

As the error message indicates, corruption is one of the causes of the “File format and extension of [filename] don’t match” error. If your file is corrupted, you can repair it using Microsoft’s built-in Open and Repair tool. Here are the steps to run the Open and Repair tool to repair corrupted Excel file:

• In Excel, click on File.
• Click Open and then click on Browse to select the corrupted Excel file.
• In the Open dialog box, click the Excel workbook (in which you are facing the error).
• Click the arrow next to the Open button and select Open and Repair.
• Then, click Repair to recover as much data as possible.
• The Excel prompts a message after the repair process is complete. Click Close.

The Open and Repair utility may fail to give the intended results. In such a case, you can repair the corrupted/damaged Excel file using a specialized Excel repair tool . Stellar Repair for Excel is one such tool that can repair severely corrupted Excel files. With the help of this tool, you can quickly recover all the objects from the Excel file. The tool has a simple user interface that even a non-technical can use to repair the Excel files. The tool can also repair multiple Excel files at once. You can check the tool’s functionality by downloading its demo version.

Closure

You can encounter the “File format and extension of [filename] don’t match” error due to different reasons. To resolve the issue, you can check the file extension, permissions, protected settings, etc. If you suspect the error has occurred due to corruption in the Excel file, you can try repairing the Excel file using the Open and Repair tool. If nothing works for you, then try Stellar Repair for Excel . It can repair highly damaged Excel files and recover all the data while preserving the file properties and cell formatting. The tool can help you fix all the common corruption-related errors quickly.

‘Open and Repair’ Doesn’t Work in MS Excel

Summary: In this Blog, we will go through Microsoft office most important product i.e Microsoft excel, let’s get into all possible Manual and an alternate method to deal with MS Excel open and Repair doesn’t work issue, read on to know more.

Whether you are a student or an entrepreneur, the features of Microsoft Excel do not delude anyone. Setting goals, creating budgets, analyzing data, calculating salaries, is there anything that Excel can’t do? All of us have used it and trusted it to calculate and provide a solution to our most difficult problems. However, like every other software application, this otherwise reliable application can sometimes fall prey to unexpected errors which can even threaten to make our critical data inaccessible.

A good idea to avoid loss of data when a Microsoft Excel file becomes corrupt is to take some proactive measures, such as saving a backup copy of your files and creating an automatic recovery file at periodic intervals. If you are faced with a corrupted Excel file, you know you can still use the ‘Open and Repair’ function provided by Microsoft to fix and open corrupt Excel file. However, what should a user do when ‘Open and Repair’ is not working? This is a query shared by millions of Excel users worldwide. Sometimes, the ‘Open and Repair’ functionality of Excel stops working due to unknown reasons. In such cases, if users face Excel file corruption, they get stuck with no idea how to fix the Excel file.

Manual method “Reference”

In this guide, we’re providing you with the solutions to this very problem. If Excel ‘Open and Repair’ is not working, read on to find out the procedures that you can perform to open corrupted files.

‘Open and Repair’ doesn’t work: Try an alternative solution i.e. Stellar Repair for Excel to recover everything from corrupt Excel files.

How to Fix Excel file that Won’t Open

If your workbook is opening in Excel, there are two options to recover its data. It would be best if you try to perform one, and if you are unsuccessful, move on to the next.

Revert the workbook to the version that was saved before the corruption

• Launch Excel and click File -> Open

• Select the file that is corrupted and open it
• Click ‘Yes’ to save the copy of the workbook that was saved before corruption

Important Note: If you use this method, you will lose all changes made to the file after it was corrupted.

Save the workbook in the SYLK file format

• Launch Excel and click File -> Save As.
• In the Save as Type field, select SYLK (Symbolic Link) from the drop-down menu, and click Save.

• To save only the active sheet in the workbook, click OK. The system will display a message that the sheet has features that are not compatible with the SYLK file format.
• Click Yes.
• In Excel click File -> Open.
• Select the file that you saved in SYLK file format and open it.
• In Excel click File -> Save As.
• In the Save as Type field, select Excel Workbook from the drop-down menu.
• In the File Name field, type a new name for your workbook and click Save.

The SYLK file format will filter out the corrupted elements from your workbook, thereby restoring your data.

Important Note: Using this method you only be able to salvage the active sheet in the workbook.

How to Open/Fix an Excel file that cannot be opened

In this case too, there are two options to recover the data. Try to perform one, and if you are unsuccessful, move on to the next.

Set the calculation option to Manual

• Launch Excel and click File -> New.

• From the Available Templates window, select Blank workbook.

• Click File -> Options.
• Under Formulas, in the Calculation options section, click Manual.

• Click OK.
• In Excel click File -> Open.
• Select the corrupted file and open it.

The system opens the corrupted file. Since the workbook won’t be calculated, it might open.

Link the workbook to external references

• Launch Excel and click File -> Open.
• Copy the name of the corrupted file and click Cancel.
• In Excel click File -> New.
• From the Available Templates window, select Blank workbook.
• In the new workbook, on cell A1, type the following:

=File Name!A1

In the above command, the filename is the name of the corrupted file.

• On the Update Values dialog box, select the corrupted file and click OK.
• On the Select Sheet dialog box, select the sheet and click OK.
• Select cell A1. Select the same range of rows and columns as occupied by the data in the corrupted sheet, including cell A1.
• Under the Home tab, in the Clipboard section, click Paste.
• While the range of rows and columns are still selected, click Copy.
• Click the Paste
• Under Paste Values, click Values.

Note: This method lets you recover only the data but not the values and formulas from the workbook.

Alternative Solution

In addition to the above-mentioned techniques, you can also use macros to extract data from a corrupted workbook. However, macros are generally risky, and executing them needs prior technical knowledge.

Thus, if the above methods do not yield the desired results, a quick and easy way for reconstructing Excel files is to use Excel Recovery Software . Stellar Repair for MS SQL software is the best choice for rebuilding damaged Excel files and restoring everything to a new Excel file. The product lets you recover table, chart, chart-sheet, cell comment, image, formula, sort and filter data from damaged workbooks and also allows you to fix multiple files at one go.

Wrapping it up

Though one of the above-mentioned techniques should recover Excel file if ‘_Open and Repair’ utility doesn’t work_, in case you’ve reached nowhere even after using them, contact Microsoft support for more help.

[Fixed]: Freeze Panes not Working in Excel

Summary: This blog discusses the “freeze panes not working” issue in Excel. It mentions the possible reasons behind the issue and offers workarounds and methods to fix it. If the issue is associated with corruption in the Excel file, you can use the specialized Excel repair tool mentioned in the blog to repair the affected file.

The freeze panes feature in Excel is used to freeze the row/column headings to keep them visible while scrolling the worksheet. It is a useful feature when you’re working on a large worksheet containing data that exceeds the rows and columns on the screen. Sometimes, you notice that the ‘Excel freeze panes feature is not working’. There could be numerous factors that can trigger this issue. Let’s know the reasons for the freeze pane not working issue in Excel and how to resolve this issue.

Why can’t I freeze panes in excel?

Several factors may contribute to the Excel freeze panes not working issue in Excel. A few of them are:

• The cell editing mode is enabled in the workbook in which you are trying to use the Freeze Panes feature.
• The Excel file is corrupted.
• The worksheet is protected.
• Advanced Options are disabled in Excel Settings.
• The Excel application is not up-to-date.
• You might be trying to lock rows in the middle of the worksheet.
• Your Excel workbook is not in normal file preview mode.
• Wrong/incorrect positioning of the frozen panes.

How to fix ‘Freeze Panes not Working’ in Excel?

The freeze panes option is available in the View bar. Sometimes, you’re unable to see the View option. It usually occurs if you are using the Excel Started version. Check and try to open the file in the advanced Excel version, which supports all the features. If you are using the advanced Excel version, then try the below workarounds to fix the freeze panes not working issue in Excel.

Workaround 1: Exit the Cell Editing Mode

If your Excel file is switched from normal file view mode to cell editing mode, you can encounter the freeze panes not working issue. In cell editing mode, certain features in Excel, such as the freeze panes, are temporarily disabled to prevent any conflicts. You can disable cell editing mode by pressing the ESC or Enter key. Now locate the View tab and check whether the freeze pane feature is working. If not, then try the next workaround.

Workaround 2: Change the Page Layout View

The Excel freeze panes not working issue can also occur if your workbook is opened in Page Layout view. The Page Layout view doesn’t support freeze panes. If you select page layout, the freeze panes option gets disabled.

To enable the freeze pane option, go to View and click the Page Break Preview tab.

Workaround 3: Check and Remove Options under the Data Tab

Sometimes, you can experience the “freeze panes not working” issue if Sorting, Data Filter, Group, and Subtotal options are enabled in Excel workbook. Such options, when enabled, can lead to unexpected problems with the freeze panes’ functionality. You can check and remove these features from your workbook. To do so, follow these steps:

• Open the Excel file in which you are getting the issue.
• Navigate to the Data tab.
• Check and remove the below features (if enabled):
• Sort
• Filter
• Group
• Subtotal

Workaround 4: Check and Unprotect Worksheet

The freeze panes feature may stop working if your worksheet is protected. You can try to disable the worksheet protection option. Here are the steps:

• In the Excel file, go to the Review tab.
• Click Unprotect Sheet.

After unprotecting the sheet, check whether the “freeze panes not working” issue is resolved. If not, follow the next workaround.

Workaround 5: Use Correct Cell Positioning

The freeze pane is not working issue in Excel can also occur when you use incorrect cell positioning to apply the freeze panes feature. Several users have reported facing this issue when trying to lock multiple rows with the wrong cell selection. So, use correct cell positioning to freeze the rows. For example, if you are trying to lock two rows in an Excel worksheet, then you need to click on 3rd row’s column.

What if the above Workarounds Fail to Fix the Freeze Panes not Working Issue?

If none of the above workarounds works, then there are chances that the workbook is damaged or corrupt. In such a case, you can try the below methods to repair the corrupt Excel workbook.

Run Open and Repair Utility

In case of corruption in the Excel file, you can use the Open and Repair tool in Excel to repair the file. To use this utility, follow these steps:

• In the Excel application, navigate to File and then click Open.
• Click Browse to select the workbook in which you are facing the issue.
• The Open dialog box is displayed. Click on the affected file.
• Click the arrow next to the Open option and then click Open and Repair.

• Click on the Repair option to recover as much data as possible.
• You can see a completion message once the repair process is complete. Click Close.

Use a Professional Excel Repair Tool

If the Open and Repair tool doesn’t work to resolve complex file-related issues and your Excel file is severely corrupted, you can opt for a reliable third-party Excel repair tool, such as Stellar Repair for Excel. This tool can help you repair the Excel file and recover all the data with complete integrity. You can try the software’s demo version to scan the affected file and preview the recoverable data. The software is compatible with all MS Excel versions and Windows operating systems, including Windows 11.

Closure

The “freeze panes not working” issue in Excel can occur due to several reasons, like protected worksheet, incompatible Excel version, and incorrect cell position. Try the workarounds shared in the blog to fix the issue. If the Excel file is corrupt, you can use Stellar Repair for Excel to fix the corruption issues in the file. This tool can quickly repair the Excel file and recover all the data from the file with 100% integrity.

4 Ways to extract data from corrupt Excel file

Summary: Excel files can become corrupt due to numerous reasons. This blog will discuss the reasons behind the corrupted Excel files. Sometimes the file becomes inaccessible. This post includes four ways to extract data from a corrupt Excel file. It also mentioned Stellar Repair for Excel to repair severely corrupted files. The tool helps you recover data from damaged Excel files with complete integrity.

Imagine the frustration of an employee if an Excel workbook he took hours to complete became corrupted for some reason threatening to erase all the data saved in it. Not just that, a corrupted Excel workbook can wreak havoc for the organization too since it poses a risk of permanently deleting critical business information like work records or employee trackers.

Unless a backup of all important Excel files exists, recovering data lost due to damage/corruption to them is next to impossible. However, we’ve conducted some research and found some pretty neat hacks to help you extract data from corrupt excel files without much hassle.

Primary reasons triggering Excel file corruption

As we always point out, to solve a problem for good, getting to its root is imperative. Here are the main reasons that cause Excel file corruption. Knowing these reasons can help you keep Excel corruption at bay for a considerably long time.

• Abrupt system shutdown when you’re editing an Excel sheet
• Bugs / Defects in your Excel application or installation
• Hardware failures like bad sectors on the hard drive where Excel sheets are saved
• Virus Infection / Malware Attack
• Excessive data storage within a single Excel file
• Faulty Excel Macros and CSE Formulas

Depending upon the extent of damage, there can be several ways to perform corrupt Excel file repair.

How to repair corrupt Excel files?

There are a couple of manual methods that can help you repair corrupt Excel files .

1. If the damaged Excel sheet can be opened, immediately save its copy; thereafter:
   • Open it with a later version of Excel and save it as a new workbook.
   • If this doesn’t work, open it in Excel’s latest version and save the workbook in HTML or HTM format.
   • Once this is done, reopen the HTML file and save again in XLS format.
   • Lastly, open the file and try saving it in SLK format (symbolic link)

Note: It is important to note that saving an Excel workbook in HTML format causes loss of features like custom views, scenarios, unused styles or number formats, natural language formulas, data consolidation settings, custom function categories, etc. In SYLK format only the active worksheet is saved so if using this method, you’ll need to repeat these steps for each worksheet.

2. Use Excel’s inbuilt Repair function as follows:
   • Launch Microsoft Excel and go to Office button -> Open
   • In the Open dialog box, select the damaged Excel file
   • On the bottom-right corner of the Open dialog box, you will find a drop-down next to Open Click on it and select Open and Repair
   • This will launch the inbuilt Repair module of Excel and you’ll see a dialog box asking you to select an option from Repair or Extract Data
   • Click on Repair to initiate the repair process.
   • If this doesn’t work, repeat steps 1-4, and when Excel asks you to select an option, select Extract Data from corrupt excel file. Thereafter, follow the instruction Excel shows and you should be able to retrieve your data, but you may end up losing some formulas.
3. If you cannot open the Excel, download Spreadsheet viewer from the Microsoft website and open the file using this program. Thereafter copy all data into a new Excel.

Note: This method will cause much of your formatting, formulas, and more to be lost.

4. You can download Open Office from its official website OpenOffice.org and try opening the Excel in it. The two programs are very similar so all data should automatically align in the correct place and with the correct formatting.

Note: With this method, VBA code cannot be recovered due to incompatibility between OpenOffice.org and Excel.

Full-proof method for corrupt Excel file repair

If you find the above methods confusing, or you wish to perform Excel file repair without having to face any data and formula loss, or you cannot achieve the desired results with any of these methods, stop wasting any more time with methods that will only frustrate you more. Instead, download the sure-shot solution for dealing with severe Excel corruption –Stellar Repair for Excel  and relax!

Stellar Repair for Excel is the best choice for repairing corrupt or damaged Excel (.XLS/.XLSX) files and restoring everything to a new blank Excel file. This competent software can skillfully repair single as well as multiple XLS/XLSX files while preserving worksheet properties and cell formatting. If you have this product by your side, you don’t need to worry about Excel corruption errors ever again.

To Conclude

Instead of giving up on corrupted Excel sheets, try repairing them with the simple tricks we’ve described. And if they don’t work, keep calm and turn to Stellar Repair for Excel.

Solved - The File is Corrupted and Cannot be Opened - Excel

Summary: Unable to open Excel file due to the error ‘The file is corrupted and cannot be opened’? Read this blog to find more details about the error, possible reasons behind it, and solutions to fix the error. In addition, the blog mentions about Stellar Repair for Excel software that can help fix the Excel error in a few clicks. Download the software now and see free preview of the file.

About the Error

Microsoft Excel is a widely used spreadsheet application that comes bundled with MS Office. Users tend to update the application with new security patches and features. Sometimes these updates can cause problems, and result in “The file is corrupted and cannot be opened” error.

Figure 1 – Excel File Corrupted Error Message

Other Possible Reasons behind ‘The File is Corrupt and Cannot Be Opened’ Excel Error

• Opening an older Excel version file in a newer version of Excel. For instance, opening Excel 2013, 2010, or earlier versions in Excel 2016.
• When attempting to open a Microsoft Office (Excel) email attachment in Microsoft Outlook 2010, MS Office 2010 reports a problem with the file preventing it from opening.

How to Fix the ‘Excel File is Corrupt and Cannot Be Opened’ Error?

Here are a few possible solutions that you can try to fix the ‘Excel file is corrupt and cannot be opened’ issue and open your Excel file.

Solution 1: Changing Component Services Settings

Solution 2: Changing the Protected View Settings

Solution 3: Repair Excel Files using Excel Repair Software

Solution 1: Changing Component Services Settings

[Caution] Changing Component Services settings requires making changes to the registry, and any mistake can harm your computer.

Follow these steps to change ‘Component Services’ settings:

• Click ‘Start’ or ‘Win+R’ and type ‘dcomcnfg’ and press ‘Enter’.

• In the navigation pane, expand the ‘Component Services’, and then expand ‘Computers’.

Figure 2 – Component Services Settings

• Next, right-click on ‘My Computer’, and then click ‘Properties’.

When the ‘My Computer Properties’ dialog box appears, click on the ‘Default Properties’ tab and then set the following values:

• Default Authentication Level: Connect
• Default Impersonation Level: Identify

Figure 3 – Illustrates My Computer Properties

• Click ‘OK’ to change ‘Default Properties’

Solution 2: Changing the Protected View Settings

[Caution] Disabling the ‘Protected View’ can put your system at high risk. Viruses attached to the Excel files can attack and infect your system. Be careful before using this option.

Excel 2010 file cannot open due to the ‘Protected View’ setting in Microsoft Outlook 2010. And so, changing the setting may help fix the error. For this, perform these steps:

• Open MS Excel 2010, go to the ‘File’ menu and click ‘Options’.

Figure 4 – Options

• When the ‘Excel Options’ window opens, click on ‘Trust Center’ and then on ‘Trust Center Settings’.

Figure 5 – Open Trust Center Settings

• Next, choose ‘Protected View’ and uncheck all the options including ‘Enable Protected View for Outlook attachments’ if you use Outlook for email.

Figure 6 – Uncheck Protected View Settings

• Click ‘OK’. Restart the application and try opening the Excel file again.

If none of the above solutions works for you, your Excel file is likely severely corrupt. To repair corrupt Excel files, you need to use advanced options like Stellar Repair for Excel tool. It repairs corrupt and damaged Excel files and helps in retrieving lost data.

Solution 3: Use Excel File Repair Tool

Considering the risks associated with the above solutions, it’s better to use an Excel repair tool to repair single or multiple corrupt Excel files at once. The process is simple, and even a novice can use the Excel file repair tool to repair Excel files with the help of the following steps:

• Download Stellar Repair for Excel and install it.

• Launch the tool. In the tool’s main interface, click ‘Browse’ to select the file. If you don’t know the file location use the ‘Search’ option.

Figure 7 – Illustrates Selecting Corrupt Excel File in Stellar Repair for Excel

• Select the file, and then click on Repair.

Figure 8 – Illustrates Initiating Excel File Repair in Stellar Repair for Excel

• The software scans and lists the Excel file in the left pane. Click on the file to preview its recoverable objects in the right pane.

Figure 9 – Illustrates Preview of Recoverable Excel File Objects

• Save the repaired file at either the default location or a user-specified location.

Figure 10 – Illustrates Saving Repaired Excel File in Stellar Repair for Excel

• Click ‘OK’ to save the repaired Excel file. After the repair process is completed, browse to the location and open it with MS Excel 2010 or any other version.

Figure 11 – Illustrates Saving Complete Message in Stellar Repair for Excel

You will be able to access your Excel file from the selected location.

Conclusion

You can use the first two possible solutions to fix the “The file is corrupted and cannot be opened” error. If you can access the file, save its data and restore the default settings. However, if the file is corrupt and the data retrieved using the first two solutions is inconsistent or incomplete, use Stellar Repair for Excel. This tool can help you recover Tables, Charts, Chart Sheets, cell comments, Images, and Formulas while preserving the worksheet properties and cell formatting. You can also preview the file and verify the data inside the file before saving it.

[Fixed] Excel VBA Runtime Error 9: Subscript Out of Range

Summary: The runtime error 9 in Excel usually occurs when you use different objects in a code or the object you are trying to use is not defined. This post will discuss the reasons behind the Excel VBA error “Subscript out of Range” and the solutions to resolve the issue. It will also mention an Excel repair tool that can help fix the error if it occurs due to corruption in worksheet.

Many users have reported encountering the error “Subscript out of range” (runtime error 9) when using VBA code in Excel. The error often occurs when the object you are referring to in a code is not available, deleted, or not defined earlier. Sometimes, it occurs if you have declared an array in code but forgot to specify the DIM or ReDIM statement to define the length of array.

Causes of VBA Runtime Error 9: Subscript Out Of Range

The error ‘Subscript out of range’ in Excel can occur due to several reasons, such as:

• Object you are trying to use in the VBA code is not defined earlier or is deleted.
• Entered a wrong declaration syntax of the array.
• Wrong spelling of the variable name.
• Referenced a wrong array element.
• Entered incorrect name of the worksheet you are trying to refer.
• Worksheet you trying to call in the code is not available.
• Specified an invalid element.
• Not specified the number of elements in an array.
• Workbook in which you trying to use VBA is corrupted.

Methods to Fix Excel VBA Error ‘Subscript out of Range’

Following are some workarounds you can try to fix the runtime error 9 in Excel.

Method 1: Check the Name of Worksheet in the Code

Sometimes, Excel throws the runtime error 9: Subscript out of range if the name of the worksheet is not defined correctly in the code. For example – When trying to copy content from one Excel sheet (emp) to another sheet (emp2) via VBA code, you have mistakenly mentioned wrong name of the worksheet (see the below code).

1
2
3
4
5
6
7
8

Private Sub CommandButton1_Click()
Worksheets("emp").Range("A1:E5").Select
Selection.Copy
Worksheets("emp3").Activate
Worksheets("emp3").Range("A1:E5").Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub

When you run the above code, the Excel will throw the Subscript out of range error.

So, check the name of the worksheet and correct it. Here are the steps:

• Go to the Design tab in the Developer section.
• Double-click on the Command button.
• Check and modify the worksheet name (e.g. from “emp” to “emp2”).

• Now run the code.
• The content in ‘emp’ worksheet will be copied to ‘emp2’ (see below).

Method 2: Check the Range of the Array

The VBA error “Subscript out of range” also occurs if you have declared an array in a code but didn’t specify the number of elements. For example – If you have declared an array and forgot to declare the array variable with elements, you will get the error (see below):

To fix this, specify the array variable:

1
2
3
4
5
6
7

Sub FillArray()
Dim curExpense(364) As Currency
Dim intI As Integer
For intI = 0 to 364
curExpense(intI) = 20
Next
End Sub

Method 3: Change Macro Security Settings

The Runtime error 9: Subscript out of range can also occur if there is an issue with the macros or macros are disabled in the Macro Security Settings. In such a case, you can check and change the macro settings. Follow these steps:

• Open your Microsoft Excel.
• Navigate to File > Options > Trust Center.
• Under Trust Center, select Trust Center Settings.
• Click Macro Settings, select Enable all macros, and then click OK.

Click here

The name or format of the Excel file or name of the objects may get changed due to corruption in the file. When the objects are not identified in a VBA code, you may encounter the Subscript out of range error. You can use the Open and Repair utility in Excel to repair the corrupted file. To use this utility, follow these steps:

• In your MS Excel, click File > Open.
• Browse to the location where the affected file is stored.
• In the Open dialog box, select the corrupted workbook.
• In the Open dropdown, click on Open and Repair.
• You will see a prompt asking you to repair the file or extract data from it.
• Click on the Repair option to extract the data as much as possible. If Repair button fails, then click Extract button to recover data without formulas and values.

If the “Open and Repair” utility fails to repair the corrupted/damaged macro-enabled Excel file, then try an advanced Excel repair tool, such as Stellar Repair for Excel. It can easily repair severely corrupted Excel workbook and recover all the items, including macros, cell comments, table, charts, etc. with 100% integrity. The tool is compatible with all versions of Microsoft Excel.

Conclusion

You may experience the “Subscript out of range” error while using VBA in Excel. You can follow the workarounds discussed in this blog to fix the error. If the Excel file is corrupt, then you can use Stellar Repair for Excel to repair the file. It’s a powerful software that can help fix all the issues that occur due to corruption in the Excel file. It helps to recover all the data from the corrupt Excel files (.xls, .xlsx, .xltm, .xltx, and .xlsm) without changing the original formatting. The tool supports Excel 2021, 2019, 2016, and older versions.

Recover Corrupted Excel File 2007, 2010 | Easy Methods

There are several reasons that can cause Microsoft Excel workbooks to turn corrupt, such as virus attack, bad sectors on a drive on which Excel file is saved, system shutdown without properly closing the Excel application, etc.

Corruption in an Excel workbook can result in data loss or render the workbook inaccessible. Fortunately, Excel automatically starts recovery upon opening a corrupted Excel file. But, if it fails, you can manually repair the file or extract data from the corrupt file.

Quick Solution: Performing 2007, 2010 Excel repair or recovery process manually can be time-consuming. Also, manual workarounds to recover corrupt Excel workbook does not guarantee recovering the complete workbook data. Use Stellar Repair for Excel software to repair single or multiple Excel (XLS/XLSX) files in 3 simple steps. The software also helps recover the Excel file, keeping the data intact.

How to Fix Microsoft Excel 2010 & 2007 Files Corruption?

Microsoft Excel comes with an inbuilt repair utility, called ‘Open and Repair’, that helps fix and recover corrupted Excel files.

Steps to Repair MS Excel 2010 Files Manually

The detailed steps to open and repair Excel 2010 are as follows:

• Open Microsoft Excel 2010 and click File from the main menu.

• Next, click Open.

• Browse the corrupt Excel 2010 file on your computer and select it in the Open dialog.

• Click the arrow next to the Open button and choose Open and Repair.

• Click Repair when prompted to recover data to the maximum.
• If Excel fails to repair, click Extract Data to extract values and formulas in the corrupt file.
• Excel prompts to ‘Convert to Values’ or ‘Recover Formulas’.
• Click Yes if it prompts the following error:

“The document file name caused a serious error the last time it was opened. Would you like to continue opening it?

• When Excel opens the last saved file, save it.

Once you’re able to access the last saved 2010 Excel file, try extracting the file contents.

Save Excel 2010 File in HTML Format

If you can open the Excel file, choose the HTML format to save it in filtered form. After that, close the Excel file as you have your data in the HTML file. The steps to save an Excel file in HTML format are as follows:

• Open Microsoft Excel 2010, click Save As, and then choose Web Page in the ‘Save as’ type drop-down list.
• Select the “Enable Entire Workbook” option, and then click the Save button.
• Close the Excel file and reopen your Microsoft Excel application. Browse the HTML file that you have saved.
• Click File from the main menu, and select Save As in the list.
• Type-in a different name, choose Microsoft Excel Workbook in the ‘Save as’ type drop-down menu, and then click the Save button.

With this, you would be able to access the data in the corrupt Excel file.

If the inbuilt tool fails to repair Excel 2010 file, a few methods can help you recover data from corrupted or lost workbook manually.

Steps to Repair Excel 2007 Files Manually

Follow these steps to repair a corrupted 2007 Excel file by using the inbuilt Microsoft Excel repair tool:

• Open Microsoft Excel 2007, click the Office button, and then select Open.

• In the Open dialog box that pops-up, browse and select the corrupt Excel 2007 file. Click the arrow next to the Open button and choose Open and Repair.

• Click Repair when prompted to recover as much data as you can from Excel 2007 file.

• If a repair fails, follow steps 1 till 3, and then click Extract Data to extract values and formulas from the corrupt file.
• In the window that appears, click Convert to Values or Recover Formulas to extract workbook data.

Note: The built-in Microsoft Excel 2007 repair tool may fail to resolve Excel corruption issue. Also, choosing to extract data from the workbook involves data loss risk. Using a professional Excel repair tool, however, can resolve all types of Excel file corruption errors and restore all its data.

Methods to Recover Data from Corrupt Excel 2010 & 2007 Files

If the ‘Open and Repair’ feature fails in getting your Excel 2010, 2007 file repaired, you can try retrieving the file contents by following some manual methods. However, the methods may vary depending on whether you can open a workbook or not.

Method 1 – Move Corrupt Excel File to another System

Move the corrupt Excel file to any other computer and try opening it in MS Excel 2010/2007. Doing so, may help you resolves disk or network-related errors leading to Excel file corruption.

Method 2 – Revert Unsaved Excel File to its Last Saved Version

If an Excel file turns corrupt while working on it but before saving any changes, try reverting it to its last saved version. To do so, perform the following:

• Open your Excel application, click the Office button, and then click Open from the menu.
• Browse the corrupt Excel file, click Yes when prompted to revert to its last saved version.

What if Nothing Works?

If you fail to recover a corrupt Excel 2007/2010 file, perform Excel file recovery with Stellar Excel repair software. The software is specially designed to help users fix their corrupted XLS/XLSX files quickly and easily without any technical assistance. It also helps restore all the file data to its original form.

Points to Remember

• Close all the MS Excel instances before using the software
• If the sheet you are repairing contains engineering formulas, please include ‘Analysis TooPak’ manually from Tools > Add-Ins

If you know the corrupt Excel 2007 or 2010 file location, click Browse to choose the file. Otherwise, click Search. Follow the below steps to recover data from corrupt Excel 2007/2010 file by using Stellar Excel repair tool:

• Click the Repair button to scan the file.

• Once the scanning process is complete, the software shows a preview of recoverable Excel file items.

• To save the repaired file, click the Save File option on File menu.

• In ‘Save File’ dialog box, choose to recover Excel 2007 & 2010 data to either the Default or New location. Click OK.

The repaired Excel file gets saved at the specified location.

Preventive Measures to Avoid Losing Excel File Data

The above-discussed methods might help salvage your data. But, it is recommended that you must take some preventive measures to avoid losing the data. One such important measure is backing up a copy of your workbook automatically. Doing so, will help you get back data in case the workbook is accidentally deleted or corrupted.

Steps to Create Backup Copy Automatically

You can automatically create an Excel backup copy by following these steps:

• Click Save As from the main menu of your Excel application.
• Browse to the location where the corrupt Excel 2010/2007 file is saved.

• In ‘Save As’ dialog box, click the arrow next to Tools button (given at the bottom left corner) and choose General Options.

• In ‘General Options’ box, check Always create backup checkbox, and then click OK.

With this, you instructed MS Excel to create a backup of every Excel file you create or open for work.

This article outlined the typical reasons resulting in a corrupt Excel 2010 or 2007 file, such as virus infection, bad sectors on drive, etc. It explained how to fix a corrupted Excel file by using the inbuilt MS ‘Open and Repair’ tool. The article also discussed methods to recover Excel files in MS Office 2010 & 2007 when the Microsoft Excel repair tool fails. Further, it explained how using a professional repair tool such as Stellar Repair for Excel can come in handy when the manual methods to repair and recover Excel 2007 and 2010 file fails. But, keep in mind, a workbook may get corrupt again. And so, make sure to automatically backup your workbook to avoid losing its data.