Fix Cannot Paste the Data Error in Microsoft Excel

When copying and pasting the cell contents or attributes from one workbook to another, you can encounter the “Cannot paste the data” error. The error indicates that the values you are trying to paste do not match the cell format (Currency, Date, Text, etc.) used in the column. The error can occur if you are attempting to paste information into a merged cell. You can also get this error if the data you are trying to paste contains more columns than the destination worksheet can accept or if the copy area and paste area aren’t the same size.

Why you cannot Paste the Data in Microsoft Excel?

You can experience the “Excel cannot paste the data” error due to one of the following reasons:

• Locked cells
• Data size limitation
• Formatting issues
• The file size is too large
• Overloaded clipboard
• Data type mismatch
• Invalid range
• Lack of permissions
• Excel file is corrupted
• Compatibility issues
• While pasting the merged cells

Methods to Fix MS Excel Cannot Paste the Data Error

The “Microsoft Excel cannot paste the data” error usually appears when copying and pasting data within the spreadsheet. It primarily affects the copy-and-paste feature within the Excel file. However, the impact of this error may vary with the data you are working with. When this error occurs, first try restarting the Excel application. Ensure that you’ve saved all your important data before restarting the application to prevent data loss. If, after performing this basic step, you still face the issue, then try the following troubleshooting methods.

Method 1: Check and Unlock Cells in Excel

You can get the Excel cannot paste the data error if the cells you are trying to paste in the Excel file are locked. You can check and unlock the specific cells in the Excel file using the below steps:

• Go to the Home tab in your Excel file and click Format Cell Font popup launcher.

• In the Format Cells dialog box, click Protection.

• Under the Protection option, unselect the locked field and then click OK.

Method 2: Check and Fix the Cell Format

Sometimes, you can get the “Cannot paste the data” error in Excel if there is an issue with the formatting of the cells in the column (in which you are trying to paste the data). You can check whether the cell formats of the columns of the source file (from where you are copying data) match the destination file (in which you are pasting the cell data). If not, then change the cell format. Here’s how to do so:

• In the Excel file, click on the affected column heading (whose cells you need to modify).
• Navigate to the Home tab and click the General dropdown menu.

• Click on the desired cell format that matches the values you are trying to paste into the column.

Method 3: Check Copy and Paste Area Size

The “data cannot be pasted” issue can also occur if Excel detects the copy area of the range of cells is not of the same size and shape as that of the paste area. So, make sure the size of the range of cells for the paste area is same as the copied area. To ensure this, you can try the following:

• Use Upper-left Cell

 You can select the upper-left cell instead of the complete range to paste.

• Use Paste Special Option

• You can use the Paste Special option to paste the data. To use this option, go to Home > Paste Special.

• You can choose from the different options, such as paste all, formulas, operations, Transpose, skip blanks, etc. to take control over how the data is pasted.

Method 4: Check and Unmerge Cells

The merged cells in the workbook can create discrepancies when copying and pasting data. These can create mismatch between the source and destination cell areas, resulting in errors. Make sure you are not pasting the data copied from merged cells. You can check and unmerge the cells using the below steps:

• Open the Excel file (in which you are copying data) and go to the Home tab.
• Click Merge & Center > Unmerge Cells.

Method 5: Unselect the Excel DDE (Dynamic Data Exchange) Option

Sometimes, you can get the Excel cannot paste the data error while copying and pasting data from Excel file to external data sources or applications. It usually appears if you have established DDE links between them. To resolve this, you can uncheck the “Ignore other applications that use Dynamic Data Exchange (DDE)” option. Follow the below steps to do so:

• Open your Excel file.
• Go to File > Options.

In Excel Options, click Advanced and unselect “Ignore other applications that use Dynamic Data Exchange (DDE). Click OK.

Here are some additional solutions you can try to fix the “Cannot paste the data” error in Excel

Check the Excel File Format

Sometimes, the copy and paste error can occur if you try to move data from an older version of Excel file (XLS) into a newer version file (XLSX) or vice versa. You can try to change or convert the file format to resolve the issue.

Clear Clipboard

Too many items on the clipboard can prevent you from copying and pasting the data. You can empty your clipboard  by deleting all clips. To do this, go to Home and click the Clipboard option.

Change the Column’s Cell Format

You can get the “Cannot paste the data” error when the information you need to paste does not match the cell format in the column. In such a case, you can change the column’s cell format. To do this, navigate to the Home option and then click on the General menu arrow. Then, change the cell format suitable to the type of information you are trying to paste in that column.

Add Columns

The copy-and-paste error in Excel can also occur if there are not enough columns to accept the data that you are trying to paste. You can insert more columns and then try copying and pasting data. To insert additional columns, click on the column heading, click Home, and then select Insert.

Remove Incompatible Add-ins

Sometimes, incompatible or faulty add-ins can also create conflicts with Excel’s clipboard operations, leading to the error. To check if add-ins are causing the issue, open the Excel file in safe mode. In safe mode, if you are able to paste the data, then check and uninstall the incompatible Excel Add-ins.

What to do if Nothing Works?

If the above methods do not work, then corruption in the Excel file could be the cause of the “Cannot paste the data” error. In such a case, you can use Excel’s built-in Open and Repair utility to repair the corrupted file. Here’s how to use this utility to repair the Excel file:

• Open your Excel application.
• Navigate to File and then click Open.
• Click the Browse option to select the affected Excel file.
• The Open dialog box opens up. Click on the corrupted file.
• From the Open dropdown, select the Open and Repair option.
• The Excel will prompt you to choose one of the below options:
• Repair
• Extract
• Cancel
• Select the Repair option to extract maximum data from the file. If the Repair option fails, choose the Extract option to recover the data, excluding formulas and values.

 The Open and Repair utility may not be able to repair your Excel file if it is severely corrupted. In such a situation, the best possible way out is to use a professional Excel repair software to repair the file. You can try Stellar Repair for Excel. It can repair highly damaged or corrupted Excel (.xls, .xlsx, .xltm, .xltx, or .xlsm) file and recover all the objects from the file by maintaining the original formatting. The tool supports 2007 and higher editions of MS Excel. You can download the demo version of the software to preview the repaired objects and verify its functionality.

Conclusion

The “Excel cannot paste the data” error in Excel can occur due to different factors. You can check and clear the clipboard, unmerge the cells, unlock the cells, and use various other methods mentioned above to troubleshoot the error. If you fail to copy and paste the data due to file corruption, then opt for an advanced Excel repair software, like Stellar Repair for Excel. It is a reliable tool that can help you repair highly damaged/corrupted Excel files. It enables you to recover all the objects from the corrupted Excel file, with complete integrity.

How to fix Pivot Table Field Name is not Valid error in Excel?

The Pivot Table field name is not valid error can occur while creating, modifying, or refreshing data fields in the pivot table. It can also appear when using VBA code to modify the pivot table. It usually occurs when there is an issue with the field name in a code or if there is a hidden or empty column in the pivot table. However, there could be many other reasons behind this error.

Why the “Pivot Table Field Name is not Valid” Error Occurs?

You can get the “Pivot Table field name not valid” error in Excel due to several reasons. Some possible causes are:

• Excel file is corrupted
• Damaged fields in the pivot table
• Pivot table is corrupted/damaged
• Hidden columns in the pivot table
• Macro (referring to the pivot table) is corrupted
• Preserve formatting option is enabled
• Missing or incorrect fields in the VBA code
• Issue with workbook.RefreshAll method syntax (if using)
• Pivot Table contains empty columns
• Header values or header column is missing in the Pivot Table
• Pivot table is created without headers
• Columns/rows are deleted from the Pivot Table

Methods to Fix Pivot Table Field Name is not Valid Error in Excel

You can get this error if you have selected the complete data sheet and then trying to create the Pivot Table. Make sure you choose only the data fields that you want to insert in the Pivot Table. If this is not the case, then follow the troubleshooting methods mentioned below.

Method 1: Check the Header Value in the Pivot Table

The “Pivot table field name is not valid” error can occur if you have not set up the pivot table correctly. All the columns having data in them should have header and header values. A pivot table without a header value can create issues. You can check the header and its value from the Formula bar. Change the header if the header value is too lengthy or if it contains special characters.

Method 2: Check and Change the Data Range in the Pivot Table

The “Pivot Table field name is not valid” can occur while modifying a field in Pivot Table. It usually occurs if you’re trying to add or modify the field by selecting an incorrect data range in the Create PivotTable dialog box. The “Create PivotTable“ feature helps define how data would be displayed within the pivot table.

Let’s take a scenario to understand this. Open the Excel file with PivotTable. Click on the fields (you want to add), go to the Insert option, and click PivotTable.

If you select an incorrect range, i.e. A1:E18, instead of correct range - “Expenses**!$A$3:Expenses!$A$4**,” you will immediately get the error message.

So, type the correct range under the Select a table or range option and click OK.

Method 3: Unhide Excel Columns/Rows

The error can also occur if some columns/rows of the Pivot Table’s data source are hidden. When you try to add a hidden column as a field in the PivotTable, the Excel application will fail to read the data of the hidden column. You can check and unhide the Excel columns by following these steps:

• Open the Excel file.
• Locate the hidden column number.
• Move your cursor on the hidden column number and right-click on the space between the columns. Click Unhide.

![unhiding the rows in Excel](https://www.stellarinfo.com/public/image/catalog//article/Repair-Office-Documents/Recover-Excel-Files/pivotimage/click-unhide-option.jpg)

Method 4: Check and Delete Empty Excel Columns

Sometimes, you can get the “Pivot Table field name is not valid” error if you are trying to use an empty column as a field in your Pivot Table. Check the columns with no values in all cells. If found, then delete the empty columns. This method is ideal for small-size Excel files. However, for large-sized files, it is a time-consuming process.

Method 5: Unmerge the Column Header (If Merged)

The “Pivot Table field name is not valid” error can also occur due to merged column headers. The pivot table references headers to identify the data inside the rows or columns. The merged headers can sometimes create data inconsistencies. You can try unmerging the column headers to fix the issue. Follow these steps:

• In the Excel file, go to the Home

• Click the Merge & Center option and select Unmerge Cells from the dropdown.

  

Method 6: Disable the Background Refresh Option

If the “background refresh” option in the Excel file is enabled, it may also create issues with Pivot Table. The Excel updates all the pivot tables in the background even after a small change if the background refresh option is enabled. This may create issues if the Excel file is large with too many tables. You can try turning off the “background refresh” option in the Excel file to troubleshoot the issue. Here is how to do so:

• In the Excel file, go to the Data tab and then click Connections.

  

• In the Workbook Connectionsdialog box, click on the ‘Add’ dropdown to add the workbook (in which you need to modify the refresh settings).

  

• Once you have chosen the Excel file, click Properties.

  

• In the Connection Properties window, unselect the **”Enable background refresh”**option, select the “Refresh data when opening the file“, and click **OK.

  

  **

Method 7: Check the VBA Code

The error can also occur when working with PivotTable using VBA code in Excel. Some Excel users reported this error on forums as run-time error 1004: The PivotTable field name is not valid. This error usually occurs when there are issues in the VBA code, affecting the PivotTable data source or field references. You can check field names referring to PivotTable or Workbook.RefreshAll function syntax and other errors in the code.

Method 8: Repair your Excel File

One of the reasons behind the “Pivot Table field name is not valid” error is corruption in the Excel file, containing the Pivot Table. You can repair your Excel file using Microsoft built-in utility - Open and Repair. Here’s how to use this utility:

• In Excel, navigate to File > Open.

• Click Browse to choose the affected workbook.

• The Open dialog box will appear. Click on the corrupted file.

• Click the arrow next to the Openbutton and then select Open and Repair.

• You will see a dialog box with three buttons - Repair, Extract Data, and Cancel.

  

• Click on the Repair button to recover as much of the data as possible.

• After repair, a message is displayed. Click Close.

Method 9: Use a Professional Excel Repair Tool

If the Excel file is heavily damaged or corrupted, then the “Open and Repair” utility may not work or provide the intended results. In such a case, you can opt for a professional Excel repair tool. Stellar Repair for Excel is an advanced Excel file repair tool, which is highly recommended by experts. It can repair severely corrupted Excel files and restore all the data from corrupt file, including pivot tables. This tool comes with a user-friendly interface that even a non-technical user can use. You can try the software’s demo version to check how it works. The software is fully compatible with all Excel versions, including Excel 2019.

Conclusion

The Excel error “Pivot Table field name is not valid” can occur due to hidden or merged column/row headers, empty columns/rows, corrupted pivot table, and various other reasons. You can try the methods mentioned above to fix the error. If this error has occurred due to corruption in the Excel file, then you can use Stellar Repair for Excel - an advanced tool to repair corrupted pivot table, macros, fields, or other elements in an Excel file. It is compatible with all Windows editions, including the latest Windows 11. It can help fix the error if the data source or Pivot table configuration is affected by corruption.

Repair Office 2016 Files (Word, Excel and PowerPoint)on Windows

If you frequently work with Microsoft Word (.docx), Excel (.xlsx), and PowerPoint (.pptx) files, then issues like file inaccessibility or corruption won’t be new to you.

Let’s discuss some common scenarios which may lead to corrupt MS Office 2016 files:

Scenarios behind Microsoft Office Files Corruption

Scenario 1 – Disruption during Data Migration

You decide to move Office files from your hard drive to other removable media. However, when you try to access the data within the files post-migration, you may find Word, Excel, and PowerPoint files showing gibberish characters. Due to a power surge, sudden system shutdown, and internal mechanical failure, the files may have turned corrupt.

Figure 1- Microsoft Word file showing garbage characters

Scenario 2 – Office Files and Registry Entries Become Infected

When you open or use the Microsoft Office application, it crashes as soon as it opens. You assume that an add-in was causing the problem and restart the Office application without add-ins loaded, but the application still crashes. This may happen because of a virus infecting the Office files and registry values, thus leading to corrupt or damaged Office files.

Scenario 3 – Inaccessible or Lost Data

Suppose all your Office files are stored on a USB device, and you unplugged the device while it was still open in Windows. Now, when you attempt to open a Word or an Excel file, all the data is gone. Unsafe removal of USB or any other external storage device may corrupt the data inside your Office files or turn the file inaccessible.

How Can You Deal with Microsoft Office Files Corruption?

Here are a few solutions that can help you fix or repair Office 2016 Files Corruption:

Solution 1 – Use Microsoft in-built Repair Utility

Microsoft recommends using its in-built repair utility, ‘Open and Repair’, to fix corrupt Office files. Follow these steps to understand how you can use the utility to repair the corrupt Word, Excel, and PowerPoint files:

• Launch the MS Office application whose file you want to repair:

1. To repair corrupt Word (.doc, .docx) files, launch MS Word
2. To repair corrupt Excel files (.xls, .xlsx) files, launch MS Excel
3. To repair corrupt PowerPoint (.ppt, .pptx) files, launch MS PowerPoint

• Click File, and then click the Open tab.
• Click Navigate to the location or folder where the Word, Excel, or PowerPoint file is stored.
• Select the corrupt file you want to repair by single-clicking on it, and then find the Open button and click on the drop-down menu next to it.

• From the drop-down menu, click the Open and Repair option and follow the subsequent instructions to repair Office 2016 files.

Solution 2 – Repair Office 2016 Installation

Try repairing the Office installation to fix the MS Office files. The steps to repair your Office installation may vary depending on the operating system you are using.

For Windows 7

• Open your PC’s control panel
• Click Programs

• Click Programs and Features, and then click Uninstall a program option

• Right-click on the Office application you want to repair, and then click Change

• Under Change your installation of Microsoft Office Professional Plus 2016, choose Repair and then click Continue.

For Windows 10

• Right-click the Start button, and type in Apps & Features (For Windows 10)

NOTE: This step will work for Windows 10/8/8.1/7 and Vista

• Click Programs from the window that opens, click on the MS Office product you want to repair, and then click on Modify

Note: Following the step will repair the entire Microsoft Office suite even if it contains only one application you want to repair such as an Excel or PowerPoint file. But, in case you have a standalone app installed, try to locate that application by name.

• Under Change your installation of Microsoft Office Professional Plus 2016, choose Repair, and then click Continue to initiate the repair process.

• Once the repair process completes, you’ll be prompted to restart your PC. Click Yes

Solution 3 – Use Stellar Toolkit for File Repair

Repair MS Office 2016 files by using Stellar Toolkit for File Repair . This software comprises four essential utilities that can help you repair corrupt MS Word, MS Excel, MS PowerPoint, and PDF files.

The toolkit helps repair corrupt Office 2016 and other version documents and files while maintaining the original file format, which is less likely achievable with inbuilt methods. Follow these steps to repair MS Office 2016 documents by using the Office file repair tool:

• Download and install Stellar Toolkit for File Repair.

• Launch the software.
• From the software’s main interface, select the MS Office file you want to repair.

• From the window that pops up, select the corrupted file to be repaired.

Note: If you don’t know the exact location of corrupt office files or if they are large in number, you can locate the files by using the Find/Search option included in the software.

• After selecting the file, click the Scan button to initiate the repairing process.
• Once the scanning process is complete, all the recoverable information is displayed in the software’s left-hand panel. Click on any item to preview it before recovery.
• To save the repaired data, click the Save button, and enter a destination of your choice.
• Click OK.

Conclusion

This post outlined possible scenarios and their causes that may lead to corruption in MS Office 2016 files. It also emphasized how the inbuilt methods such as Open and Repair, and Repair Office Installation help to resolve the corruption issues. But these are not competent enough to resolve all the errors. With Stellar Toolkit for File Repair, you can resolve all sorts of corruption issues and recover data of Office 2016 files – Excel, Word, PPT, and PDF – in their original state.

Data Disappears in Excel - How to get it back

Summary: You may face the issue of ‘Excel spreadsheet data disappeared’ after changing Excel file properties and formatting rows and columns. This blog discusses the possible reasons for data disappearance and the solutions to fix the issue. Also, it mentions an Excel file repair tool to retrieve the data from the file. Sometimes, while editing or formatting a cell in an Excel spreadsheet, the data may go missing or disappear. Let’s discuss in detail the reasons that may cause the ‘Excel data disappeared’ issue along with the solutions.

Probable Reasons for Data Disappearing in MS Excel and Solutions Thereof

Reason 1 – Unsaved Data

While entering data in an Excel spreadsheet, it is important to save the data at frequent intervals. Doing so prevents any unsaved data from disappearing if you lose power or accidentally click ‘No’ when prompted to save the file. Unfortunately, such a situation is quite common as users often close the file without saving the recently made changes to a spreadsheet.

Solution – Use the ‘AutoSave’ Feature

With the AutoSave feature enabled in Excel, data won’t be lost in the event of power failure or abruptly closing the Excel program. By default, Excel automatically saves the information in a spreadsheet after every 10 minutes. You can reduce the limit to a few seconds to reduce the chances of Excel file data lost after being saved.

Reason 2 – Changing Excel Format

You can save an Excel file in various formats, like spreadsheet, text, webpage, and more. However, at times, saving the spreadsheet in a different format may lead to missing data. For example, when you save a workbook to a text file format, all formulas and calculations applied to the data will be lost.

Solution – Adjust a Spreadsheet for the Changed Format

If you’re changing the format of a spreadsheet, make space for the rows and columns. Also, remove all calculations before saving the file.

Note: If the sheet is shared on multiple computers, then save the file in compatibility mode.

Reason 3 – Merging Cells

You can combine two or more cells data to make one large cell. This technique is primarily used to fit the text of a title in a sheet. If there is data in two or more cells, then only the data in the top-left cell is displayed and the data in all other cells is deleted. If the other merged cells have been populated with data after merging, the data is not featured and it does not appear even after remerging the cells.

Solution – Merge Cells inside One Column

To merge cells without data loss, combine all the cells you want to merge within a column and do the following:

• Select the cells to be combined.
• Ensure that column width is wide enough to fit the contents of a cell.
• In the spreadsheet, under the Editing group, click ‘Fill,’ and then click ‘Justify.’

• Under Alignment, click on the ‘Merge & Center’ option to center align the text. Or, click on ‘Merge Cells’.

Note: This solution works for text only. You cannot use it to merge formulas or any numerical values. If you need to combine two or more cells with formula into a single cell, try using the Excel CONCAT function .

Reason 4 – Cell Formatting

Cells and text in the cells can be displayed in different colors to make the spreadsheet simple to create and infer. You may experience data loss when you try to modify the data or change the color or size of the data. Though the information may exist, the data may show an error due to the following reasons:  

• White-colored text will not show in a white-colored cell
• Large font-sized data may not appear in small-sized cell
• Calculations may show (#VALUE) error after cell-formatting

Parental Control Software

#1 Rated Parental Control Software.
Monitor & Control all PC Activity!
sentrypc.com/parental-controls/ ### Solution – Check and Clear Formatting

Make sure to use dark-colored text on a white-colored cell. Also, resize the cell to fit the text size. Check if numbers in a cell are entered as text. If so, you need to apply a number format to the text-formatted numbers. Read more about it, from here .

What Else You Can Do to Resolve the ‘Excel Data Disappeared’ Issue?

If you can’t recover the missing Excel file data, try to repair or extract the data from the file using the built-in Excel repair tool. Follow the below steps to use the tool:

• Open MS Excel, click File > Open > Computer > Browse.
• On the ‘Open’ window, select the file you want to repair and then click on the Open dropdown.
• Select Open and Repair.

Use the ‘Repair’ option to repair the file and recover as much data as you can from the repaired file. If this doesn’t work, use the ‘Extract’ option to recover the data.

If you fail to retrieve the disappeared data from that file using the above-listed steps, opt for an Excel repair tool , like Stellar Repair for Excel. This software has a proven track record of repairing corrupt or damaged Excel files and recover all the data.

The software helps:

• Fix all corruption errors. It helps in getting back the data which has disappeared.
• Repair a single as well as multiple Excel files.
• Recover all components of XLS/XLSX files – tables, chart sheet, cell comment, image and more.
• Preserve the worksheet properties and cell formatting.
• Support the latest Excel 2019 and earlier versions.

The Excel repair software repairs the Excel file in these simple steps:

• Launch and open the software.
• Select the corrupt Excel file by using the ‘Browse’ option. If the file location is not available, then find the Excel file using the ‘Search’ option.

• Click ‘Repair’ to scan the corrupt file.

• Once the repair process is complete, verify the components of Excel file and check if the available preview shows complete data that disappeared from Excel.

• Save file at default location or preferred location.

The Excel file with all the restored data will be saved at the selected location.

Conclusion

It is better to repair the affected Excel file than suffer the loss when data or text disappears in Excel. A professional software ensures that users get back all the data in the form of a new Excel file. Stellar Repair for Excel software repairs the corrupt file without modifying the original content and file format. The software’s easy-to-use user interface lets you perform the functions without formal software training and technical expertise.

Easy Steps to Make Excel Hyperlinks Working

Summary: This blog discusses why hyperlinks won’t work in Excel and solutions to fix it. If nothing works, try using Stellar Repair for Excel software to recover your workbook with hyperlinks and all the data intact.

Hyperlinks in your Excel file could be references to a file’s location on the computer or a location within the same worksheet. Or, hyperlinks might be pointing to a URL. Sometimes, the hyperlinks won’t work and any of the following errors may pop up on your screen on clicking a hyperlink:

‘Cannot open the specified file.’

‘This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator.’


Causes of ‘hyperlinks not working in Excel’ problem, and solutions thereof

Here are some of the possible causes behind the ‘hyperlinks not working’ issue and solutions to fix it:

Cause 1 – Change in the name of the hyperlinked file

If the file name that appears in the hyperlink text is different than the actual file name, it will prevent the hyperlink from working.

Solution – Link to the renamed file

Ensure that the links in the Excel file are updated and points to the renamed file. For this, right-click the hyperlink and select ‘Edit the hyperlink’. Next, in the hyperlink address, replace the current filename with the renamed one in the hyperlink address.

Cause 2 – File name has a pound (#) sign

When you create a hyperlink for a file in Excel, you cannot use a pound character (#) in the file name that appears in the hyperlink. That is because the pound sign is not accepted in hyperlinks and may lead to the ‘Cannot open the specified file’ error.

Note: While you can use a pound character in a file name, it cannot be used in hyperlinks in an MS Office document.  

Solution – Rename the file name and remove the pound sign

Open the file that contains the ‘#’ sign and rename it by following these steps.

• Right-click the cell containing the hyperlink that is not working, and click Edit Hyperlink.
• From the Address box, copy the address of the file you are linking to.
• Go to the location where the file is stored, right-click on the file, and click Rename.
• Remove the ‘#’ character from the name of the file.
• Go back to the Excel file, right-click on the problematic hyperlink, and choose Edit Hyperlink. Next, browse and select the renamed file.
• The renamed file without the pound sign will be added in the Address box.
• Click OK.

Now try opening the hyperlink.

Cause 3 – Sudden system shutdown causes abrupt closing of Excel

There may be a discrepancy in the data in hyperlinks when a system shut down suddenly, without properly closing the Excel file. And so, when trying to open a link, it won’t open.

Solution – Enable the option to save hyperlinks

There is an inbuilt option in Excel to update hyperlinks every time the workbook is saved. Follow these steps to enable that option:

Note: The steps may vary based on the Excel version you are using.

For Excel 2013, 2016, or 2019:

• Open Excel Workbook -> Go to File->Options->Advanced
• Scroll down to find the General tab and click on Web Options
• Web Options Window pops-up
• In the Web Options Window, go to Files Tab and select the ‘Update Links on save‘ checkbox
• Click on OK button and your option is saved

The steps are also explained in the image below:

For Excel 2007:

• Click the Office button
• Select Excel Options, then follow Step 1) to Step 5), as mentioned above and get the Excel Hyperlinks to work again.

Still unable to open hyperlinks in Excel?

If you fail to make Excel hyperlinks work using the above-discussed solutions, use an Excel repair tool to fix the hyperlinks issue. Download the Stellar Repair for Excel to repair an XLS/XLSX file and restore the hyperlinks.

See the working of the tool here:

The tool recovers all components of the Excel file including tables, charts, chart sheets, cell comments, images, formulas, and more. You can repair multiple worksheets and fix all dysfunctional Excel hyperlinks across multiple worksheets in a single workbook. Click on the workbook, select all worksheets and start repairing

Conclusion

Carefully read the possible causes behind the ‘Excel Hyperlinks not working’ issue to understand what resulted in the issue in the first place. If nothing helps, use Stellar Repair for Excel to restore the hyperlinks and save the result in a new Excel file, without interfering with worksheet properties and cell formatting.

[Fix] Excel formula not showing result

Summary: Is your Excel spreadsheet showing text of a formula you’ve entered and not its result? This blog explains the possible reasons behind such an issue. Also, it describes solutions to fix the ‘Excel formula not showing result’ error. You can try Stellar Repair for Excel software to recover engineering and shared formulas.

Sometimes, when you type a formula in a cell of worksheet and press Enter, instead of showing the calculated result, it returns the formula as text. For instance, Excel cell shows:

But you should get the result as:

Why Does Excel Show or Display the Formula Not the Result?

Following are the possible reasons that may lead to the ‘Excel showing formula not result’ issue:

1. You accidentally enabled “Show Formulas” in Excel.
2. The cell format in a spreadsheet is set to text.
3. ‘Automatic calculation’ feature in Excel is set to manual.
4. Excel thinks your formula is text (Syntax are not followed).
5. You type numbers in a cell with unnecessary formatting.

How to Fix ‘Excel Showing Formula Not Result’ Issue?

Solution 1 – Disable Show Formulas

If only the formula shows in Excel not result, check if you have accidentally or intentionally enabled ‘show formula’ feature of Excel. Instead of applying calculations and then showing results, this feature displays the actual text written by you.

You can use the ‘Show Formulas’ feature to quickly view all formulas, but if you are not aware of this feature, and enabled it accidentally, it can be a headache. To disable this mode, go to ‘Formulas’ and click on ‘Show formula enabled.’ If it’s previously enabled, it will be disabled by just clicking on it.

Solution 2 – Cell Format Set to Text

Another possible reason that only formula shows in Excel not result could be that the cell format is set to text. This means that anything written in any format in that cell will be treated as regular text. If so, change the format to General or any other. To get Excel to recognize the change in the format, you may need to enter cell edit mode by clicking into the formula bar or just press F2.

Solution 3 – Change Calculation Options from ‘Manual’ to ‘Automatic’

There is an “automatic calculation” feature in Excel, which tells Excel to do calculations automatically or manually. If ‘Excel formula is not showing results’, it may be because the automatic calculations feature is set to manual. This issue is not easily detected because it results in calculating formula in one cell but if you copy it to some other cell, it will retain the first calculation and will not recalculate on the base of the new location. To fix this, follow these steps:

• In Excel, click on the ‘File’ tab on the top left corner of the screen.
• In the window that opens, click on ‘Options’ from the left menu bar.
• From ‘Excel Options’ dialog box, select ‘Formulas’ from the left side menu and then change the ‘Calculation options’ to ‘Automatic’ if it’s currently set as ‘Manual’.

• Click on ‘OK’. This will redirect you to your sheet.

Solution 4 – Type Formula in the Right Format

There is a proper way to tell Excel that your text is a formula. If you don’t write the formula in a particular format, Excel considers it as simple text and hence no calculations are performed according to it. For this reason, keep the following in mind when typing a formula:

• Equal sign: Every formula in Excel should start with an equal sign (=). If you miss it, Excel will mistake your formula as regular text.

• Space before equal sign: You are not supposed to enter any space before equal sign. Maybe a single space will be hard for us to detect, but it breaks the rule of writing formulas for Excel.

• Formula wrapped in quotes: You need to make sure that your formula is not wrapped in quotes. People usually make this mistake of writing a formula in quotes, but in Excel, quotes are used to signify text. So your formula won’t be evaluated. But you can add quotes inside formula if required, for example: =SUMIFS(F5:F9,G5:G9,”>30″).

• Match all parentheses in a formula: Arguments of Excel functions are entered in parenthesis. In complex cases, you may need to enter more sets of parenthesis. If those parentheses are not paired/closed properly, Excel may not be able to evaluate the entered formula.

• Nesting limit: If you are nesting two or more Excel functions into each other, for example using nested IF loop, remember the following rules:

  • Excel 2019, 2016, 2013, 2010, and 2007 versions only allow to use up to 64 nested functions.
  • Excel 2003 and lower versions only allow up to 7 nested functions.

Solution 5 – Enter Numbers without any Formatting

When you use a number in the formula, make sure you don’t enter any decimal separator or currency sign, e.g. $, etc. In an Excel formula, a comma is used to separate arguments of a function and a dollar sign makes an absolute cell reference. Most of these special characters have built-in functions so avoid using them unnecessarily.

What to Do If the Manual Solutions Don’t Work?

If you’ve tried out the manual solutions mentioned above but still unable to resolve the ‘Excel formula not showing result’ issue, you can try repairing your Excel file with the help of an automated Excel repair software , such as Stellar Repair for Excel.

This reliable and competent software scans and repairs Excel files (.XLSX and .XLS). It also helps recover all the file components, like formulas, cell formatting, etc. Armed with an interactive GUI, this software is extremely easy to work with, and its advanced algorithms allow it to fend off Excel errors with ease.

Conclusion

This blog outlined the possible reasons that may cause ‘Excel not showing formula results’ issue. Check out these reasons and implement the manual fixes, depending on what resulted in the problem in the first place. If none of these fixes help resolve the issue, corruption in the Excel file might be preventing the formulas from showing the actual results. In that case, using Stellar Repair for Excel tool might help.

[Solved] Excel Spreadsheet Disappears after Opening

Several Excel users have reported about experiencing ‘Excel spreadsheet disappears after opening’ issue. The problem occurs when attempting to open an Excel file by double-clicking on the file icon or name. The Excel file opens blank grey screen.

Figure 1 - Excel Blank Screen

User Instances of ‘Excel Open But Can’t See Spreadsheet’ Issue

Instance 1: The user said that “Excel 2016 opens to a blank screen and everything is greyed out. Ribbons at the top of Excel are also not present”.

Instance 2: The user reported that “Attempting to open a spreadsheet, either by double-clicking the file or by opening Excel, it opens but only a blank Excel window is visible. When trying to save that particular file, Excel behaves as though there is no file open at all and all the file saving options, such as save, save as, print, etc. are greyed out.”

Causes Behind ‘Excel Open But Can’t See Spreadsheet’ Issue & the Solutions Thereof

Following are some of the possible reasons behind the ‘Excel open but can’t see spreadsheet’ issue, along with their solutions:

Cause 1: Excel File is Hidden

You may have saved the Excel sheet as a hidden document.

Solution: Unhide Excel File

Verify if your Excel worksheet is hidden by following these steps:

• In Excel, click the View tab, and then click Unhide.

Note: If the ‘Hide’ tab under the View menu is greyed out, the sheet you’re trying to open is not hidden. In that case, proceed to the next workaround.

Figure 2 - Unhide Excel File

• A dialog box will pop-up showing the worksheet name that can be unhidden. For instance, below is an image of Unhide box that lists ‘Daily_Reports’ spreadsheet under Unhide workbook.

Figure 3 – Select and Unhide Excel Workbook

• Click OK to unhide your Excel sheet.

If this fails to work, there’s a possibility that the spreadsheet window pane may have slided to one side of the visible desktop. To bring back the displayed area, click the ‘Arrange All’ option under the View tab. If the issue persists, try the next solution.

Cause 2: Ignore Dynamic Data Exchange (DDE) Option is Enabled

Another reason behind the ‘Excel opens to a blank screen’ issue could be that the “Ignore other applications that use Dynamic Data Exchange (DDE)” checkbox is checked in Excel options.

Usually, when you double-click an Excel file, a DDE message is sent to Excel instructing it to open that particular file. But, if you have the ‘Ignore DDE’ option selected, the DDE message sent to Excel to open a workbook is ignored. As a result, the Excel workbook opens a blank screen.

Solution: Uncheck the Ignore DDE Option

Make sure that the ‘Ignore DDE’ option is unchecked by performing these steps:

Note: Skip these steps for Excel 2019 and Excel Office 365.

• In your Excel window, click File > Options.

Figure 4 - Select Excel Options

• From the left-side of the ‘Options’ window, choose Advanced.

Figure 5 - Excel Options Window

• In ‘Advanced’ window, locate the General section, and then uncheck the “Ignore other applications that use Dynamic Data Exchange (DDE)” checkbox.

Figure 6 - Uncheck Ignore Other Applications that use DDE

• Click OK to apply the changes.

If these steps don’t work, proceed to the next workaround.

Cause 3: Issue within Office Program

Sometimes, problem within your Microsoft Office program might cause Excel to behave oddly and may result in an Excel spreadsheet disappeared issue.

Solution: Repair Office Program

Try repairing your Office program by executing the steps listed below, based on your Windows OS:

For Windows 10:

• Type Settings in the Windows search box.
• Click Settings.
• In ‘Windows Settings’ screen, select Apps.

Figure 7 - Windows Settings Screen

• In ‘Apps & features’ screen, scroll down to your Microsoft Office program and tap on it, and then click the Modify

Figure 8 - Modify MS Office Program

• In ‘How would you like to repair your Office programs’ dialog box, select the Online Repairradio button, and then click the Repair

Figure 9 - Repair MS Office Program

For Windows 8:

• Open Control Panel and click the Uninstall a program option under Programs.
• Select Microsoft Office 365 and then click Change.
• In the window that opens, select Online Repair and then hit the Repair

You may be asked to restart your system after completion of the repair process.

For Windows 7:

• In ‘Control Panel’ window, double-click Programs and Features.
• Under Uninstall or change a program section, select the Office program, and then select Change.
• In the dialog box that appears, choose Online Repair and then choose Repair.

If repairing your Office installation fails to resolve the issue, continue to solution 4.

Cause 4: Problematic Excel and COM Add-ins

Sometimes, Excel and COM add-ins may cause Excel file open a blank grey screen problem.

Solution: Disable the Add-ins

Disabling the Excel and COM add-ins one at a time may help resolve the problem. The steps are as follows:

• Click the File menu in your Excel file and select
• From ‘Excel Options’ left-side panel, click Add-Ins, and then choose COM Add-ins from the ‘Manage’ drop-down. Click the Go

Figure 10 - Select COM Add-ins

• Uncheck one of the add-ins checkbox from the COM Add-ins window, then select OK.

Figure 11 - Uncheck and Disable COM Add-ins

• Restart your Excel program.

If the issue persists, repeat the above steps (1 till 4), except that you need to choose a different add-in in step 3.

If you’re still experiencing the same problem after unchecking all the COM add-ins, repeat all the above steps, except choose ‘Excel Add-ins’ in step 2.

If Excel can load the file, then the add-in that you disabled last leads to the problem. If turning off add-ins does not work, try the next solution.

Cause 5: Problem with Excel File Associations

The Excel file opening a blank screen problem may occur if the file associations are not performing correctly.

Solution: Reset Excel File Associations

Try resetting the file associations in Excel to their default settings. For this, follow the below steps based on your OS.

For Windows 10 and Windows 8.1:

• Select the file that is opening incorrectly and copy it to the desktop.
• Right-click the file and click Properties.
• In the File’s ‘Properties’ window, check your file type next to Type of Filefrom the General tab. For instance, (.docx), (.csv), or (.pdf).
• Next, check to which app your file is associated with from the Opens withoption

If the file type is different than .xlsx, open the file in a different application by following these steps:

• Click the Change button next to the ‘Opens with’ option.
• Click More apps.
• From the list of applications, select the desired app and then check the Always use this app Click OK.

For Windows 8:

• Open Control Panel, click Default Programs, and then select Set your default programs.
• Choose Excel and then tap the Choose default for this program
• In ‘Set Program Associations’ window, choose Select All and then click Save.

For Windows 7:

• In Control Panel, choose Default Programs.
• Click the Associate a file type or protocol with a specific program
• Choose Microsoft Excel Worksheet and click on change program.
• Choose Microsoft Excel under Recommended Programs.
• If you’re unable to find Excel, browse the Excel installation folder.
• Select exe and then choose Excel.

What Next? Use Stellar Repair for Excel to Recover Your File

If the above solutions don’t help recover your Excel file, use an Excel file repair tool, such as Stellar Repair for Excel to recover it. The software can restore the Excel spreadsheet and its components, including tables, pivot tables, charts, formulas, etc. while preserving the spreadsheet properties and formatting.

Check out the video to recover Excel file by using Stellar Repair for Excel software.

Conclusion

This article described the possible causes behind the ‘Excel open but can’t see spreadsheet’ issue, along with their solutions. The manual solutions to resolve the issue require time and efforts. But, if you need to access your Excel file without any delay, use Stellar Repair for Excel software to recover your .xlsx/.xls file in just a few clicks.